Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Temperance
Gate parts and welding in Temperance usually means one of three things: a post that frost-heaved out of plumb, a hinge that rusted through from Lake Erie moisture, or a weld that finally let go on an older farm gate. The repair typically runs $180 to $650 depending on which one you’re dealing with, and most jobs are done same-day because we carry the common hardware on the truck rather than ordering it in. If your gate is sagging, dragging, or the latch won’t reach anymore, call (877) 610-2993 and we’ll give you an honest read on what’s worth fixing versus what’s cheaper to replace.
Why Gatewood Fence & Gate Is Temperance’s Preferred Gate Parts & Welding Company
We do a lot of work in the 48182 ZIP because the houses here have a specific kind of gate problem. Temperance sits on Monroe County’s heavy clay, and that clay soaks up moisture from the lake, then freezes deep. Come March, half the gate posts in Bedford Township are leaning like they’ve been drinking. That’s not something a national parts site understands when they sell you a hinge kit that doesn’t fix the post underneath it.
Hal Gatewood has been at this since 2001, and the shop is set up to weld on site in your driveway, not haul your gate off to some facility and bring it back in three weeks. We answer the phone with a live person 24 hours a day, because when your gate won’t close and you’ve got a dog in the yard, you don’t want to leave a voicemail. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. You can read more about how we work on our Gate Parts & Welding page, but the short version is this: we fix what’s fixable and we tell you plainly when it isn’t.
Temperance customers also get the standing offer: no trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate another company gave you. Seniors and veterans always get 10% off, permanently. That’s how Gate Parts & Welding in Temperance has earned its reputation around here.
Our Gate Parts & Welding Services in Temperance
Hinge Replacement
On a Temperance gate, hinge failure usually starts with the post, not the hinge itself. When frost heave tilts the post even an inch, the gate hangs all its weight on one hinge barrel and the pin wallows out. We replace hinge barrels with sealed bearing units and re-shim the post so the gate swings true, not just quiet. A hinge replacement on an ornamental steel single gate in Temperance runs $185 to $420 depending on how much of the original weldment is still sound.
Post Replacement
This is the bread-and-butter spring call across Bedford Township. We cut out the old post, drill or dig a new footing down below local frost depth, set fresh steel or tube, and pour in place. In Temperance’s clay soil, we go deeper than the old code-footing everyone used in the 80s, because the frost line here combined with moisture-rich clay will shrug a shallow set loose in a couple of seasons. A standard ornamental gate post replacement runs $320 to $700. A heavy tube-steel farm gate post on a rural lot off Douglas Road or Summerfield Road runs $450 to $950 because of the section size and the concrete volume.
Rail Repair
Older welded rail fences in Temperance crack at the picket-to-rail weldments or where the rail meets the post. It’s usually the same story: years of freeze-thaw cycles working the metal until it fatigues. We grind out the cracked weld, reinforce the joint with a doubler where needed, and re-weld in place with the gate still standing. Most rail repairs on residential ornamental fencing here run $150 to $380 per joint, depending on access and how much corrosion has to be cut back first.
Custom Welding
For farm gates, cattle corral frames, or an ornamental double gate built 30 years ago that has a custom latch no catalog carries, we weld on site. That means we don’t have to take the gate down unless the structure is too far gone. Custom welding jobs in Temperance typically start at $140 for a straightforward bracket or latch reconfiguration, and run up from there based on material and time. We do a lot of this work on rural properties in Bedford Township where the gate was built bespoke by a local welder 40 years ago and has no part number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temperance
We keep a stock of common hardware and control boards for the brands you’re most likely to find on a Temperance or Bedford Township gate: Linear, Viking, DoorKing, and others. That lets us cut your gate’s exact replacement chain, match hinge mounting patterns, or pull a board for an older operator without waiting a week on a distributor. And when you need a new dual swing gate operator or a modern keypad to replace a 1990s key switch, we can talk through what retrofits cleanly and what doesn’t. We are certified to service nine gate brands, so we’re not trying to force you into a system swap because we only know one product line.
Common Gate Parts & Welding Problems We See in Temperance Homes
- Frost-heaved posts and sprung gates. The clay under Bedford Township heaves upward when wet soil freezes, and by late March the posts are leaning. A gate that sags in the hinge post, not in the middle, is usually a footing failure, not a hinge failure.
- Rusted hinge pins and seized barrels on ornamental steel. Lake Erie moisture settles into every gap on an older wrought-look gate. Once the pin seizes, the hinge leaf flexes until the weld cracks. We see this constantly on 1990s ornamental gates off Schoolcraft Road and Dean Road.
- Cracked welds at the post base and mid-rail. Repeated seasonal swelling works the metal until a weld lets go. On tube-steel farm gates the crack often starts at the bottom hinge gusset where water pools and rust creeps under the paint.
- Obsolete control boards on pre-2000 operators. Older FAAC, BFT, and LiftMaster boards from the late 90s are failing now from age and moisture. The gate either sticks open, won’t respond to the remote, or creeps after stopping. We can usually tell you over the phone whether it’s a board worth replacing or a full operator upgrade.
Pricing for Gate Parts & Welding in Temperance, MI
Here’s what we charge in Temperance. These are real ranges, not phone estimates that change at the door:
- Hinge replacement: $185-$420 per gate
- Post replacement (residential ornamental): $320-$700
- Post replacement (farm or tube-steel, heavy duty): $450-$950
- Rail repair / weld crack repair: $150-$380 per joint
- Custom latch or bracket welding: starts at $140
- Control board replacement (parts + labor): $260-$600
Before we touch anything, you get a written price and we agree on it. No trip charge inside the county, and if you have a written estimate from another company, we’ll give you a free second opinion. If the repair is over $200, take $40 off. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Temperance
Most of our work in Temperance comes from referrals down the same country roads into Lambertville, Monroe, South Monroe, and Milan. If you’re just across the township line, we still answer the phone the same way and we’ll tell you straight up whether the trip charge applies. The 90-Day Done Right Promise follows every job, no matter which side of the county line you’re on.
Serving Temperance, MI - Our Local Coverage Area
We’re based in the Temperance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Temperance
Frost heave in the clay soil has shifted your hinge post. Monroe County clay absorbs moisture from Lake Erie and freezes deep in winter, and each freeze-thaw cycle works the post out of plumb a little more. The fix is to re-plumb or replace the post with a deeper footing below frost depth, then re-hang the gate with sealed bearing hinges. If you only replace hinges without fixing the post, you’ll do it again next spring. Call (877) 610-2993 and we’ll come take a look.
Most farm gates we see off Summerfield Road and Douglas Road can be welded in place, especially if the frame is intact and the damage is at a hinge gusset, a picket weld, or a cracked rail joint. If the bottom rail is rusted through in multiple spots or the post feet are crumbling, replacement is usually smarter. We’ll show you both numbers before you decide.
That’s usually a limit switch, a failing clutch adjustment, or a control board that’s losing calibration. On a FAAC unit from that era, the limit switch is replaceable and the fix typically runs $180 to $320 including the part. If the board is failing, we’ll quote you the part and a retrofit option, and we’ll tell you which one makes more sense for a 30-year-old operator. Call (877) 610-2993 for an exact quote.
We replace just the post, in most cases. We cut the old post out, set a new steel post in a deeper footing, and re-hang the existing gate on it with new hinge barrels. Unless the gate itself is structurally compromised, you keep your gate and save the cost of a rebuild. This is the most common spring repair we do in the 48182 ZIP.
You re-level the track and post, and we do that on site. The frost heave in Bedford Township pushes the slide gate rollers out of alignment, and the gate starts grinding against the guide wheels or the rack. We reset the track and re-shim the wheels so the gate rolls without fighting. If the soil movement is extreme, we may recommend a taller post footing or a re-mount. Estimates are free, so call (877) 610-2993 and we’ll check it out.
What Makes Temperance Gate Work Different
In Temperance’s 48182 ZIP, the clay-rich glacial soils of Bedford Township freeze deeply each winter and absorb Lake Erie moisture, causing severe frost heave that pushes gate posts out of plumb every spring. Add the salt and humidity rolling in from the shoreline, fifteen miles east, and you get a rust-and-heave pattern that defines gate parts and welding work here far more than in neighboring Toledo-area neighborhoods built on sandier fill. Gates across Temperance fail alignment every March not from mechanical wear but because the ground itself moved under them. Re-plumbing and re-shimming posts has become our bread-and-butter spring service call here, and it’s the first thing we check when a customer says their gate suddenly won’t latch.
We got called out to a long gravel driveway off Summerfield Road where a 1990s ornamental swing gate had sagged so badly the latch wouldn’t reach. The hinge post had twisted in its footing from repeated frost heave, and the hinge barrels were seized with rust. Our tech cut out the old post, set a new steel post in a deeper concrete footing below local frost depth, and re-hung the gate with sealed bearing hinges, then welded a new catch plate and adjusted the operator arm. That gate went from dragging on the ground to a full 90-degree swing.
Temperance is also a semi-rural community with a high concentration of large-lot acreage parcels and long gravel driveways, which means we see a lot of farm-style and ornamental driveway gates that a typical suburban ZIP wouldn’t have. Ranches and colonials from the 1970s through the 2000s are everywhere here, but a growing number of those properties are transitioning into true agricultural parcels with outbuildings and field fencing. That means the gate work spans everything from a narrow ornamental iron driveway gate to a heavy tube-steel farm gate on a rural lot, often with an operator that’s been out there for decades.
And it means we know the question most Temperance homeowners are actually asking, which is: fix this again, or fix it for good? We’ll show you both. Hal Gatewood has been owner-operating this business since 2001, and his name is on the shop and on every invoice. That’s the only thing that matters when you’re deciding who to trust with a gate your animals depend on. You can drive to the shop and look him in the eye if you want. Or just call (877) 610-2993 and a live person will answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Temperance since 2001.