Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tacoma
Gate Installation - Tacoma and welding usually means one of two things: either the hardware has failed and the gate is dragging or stuck, or the frame itself has broken and needs steel or aluminum work done on site. Our crew handles both, and we get to most Tacoma homes within the day. Call (877) 610-2993 and you’ll get a live person, not a menu. We’ve worked the North End, the Stadium District, the South End, and every hill in between, so we already know what your gate is up against before we pull into the driveway.
Why Gatewood Fence & Gate Is Tacoma’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and we have been since 2001. Hal Gatewood’s name is on the shop and on every invoice, which means the person you call is the person accountable for the work. Tacoma homeowners keep calling us back because we fix the gate where it sits instead of hauling it off and selling you a new one. Repairs are quoted upfront, in writing, before any work starts. That’s not a courtesy. It’s how we run every job from the Port of Tacoma up to the Proctor District.
The Gate Parts & Welding work we do across Tacoma leans on 29 years of trade experience. When a post rots at the base in 98405 or a hinge seizes in 98403, we know the local building patterns behind it. Most of these homes were built between 1900 and 1930. Their gates were built solid, but the posts went straight into wet Puget Sound ground and the hardware was never meant for salt air. We fix both problems at once, so you’re not calling us back in a year.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. And every call to (877) 610-2993 is answered by a person, 24 hours a day. Not a voicemail box. Not a phone tree. A person who works in this trade and knows Tacoma’s gate problems firsthand.
Our Gate Parts & Welding Services in Tacoma
Hinge Replacement
In Tacoma’s waterfront neighborhoods, uncoated steel hinges fail fast. The salt-laden air off Commencement Bay accelerates corrosion within a mile or two of the shoreline, and we see hinge pins seize or snap within two to three years on gates that are nowhere near the water. We replace them with galvanized or marine-grade hardware as the default, not the upgrade. A standard hinge replacement on a single wood or steel gate in Tacoma typically runs $180 to $420 depending on post condition and gate weight.
Post Replacement
Rotted hinge posts are the most common structural call we get in 98403, 98405, 98406, and 98407. The soil here stays saturated all winter, nearly 38 inches of rain a year, and once surface rot reaches the core, that post can fail within a single wet season. We dig out the old post, set a pressure-treated or powder-coated steel replacement below grade, and weld or bolt the gate back square. Post replacement in Tacoma usually falls between $325 and $750, including hardware and concrete.
Rail Repair
When the top or bottom rail bends, rusts through, or breaks loose from the pickets, the gate loses its shape and starts dragging. On Tacoma’s hillside lots where gates rack under their own weight, rail repairs are a recurring job. We weld new rails in place or reinforce the existing frame, keeping the gate hung while we work. Rail repair runs $200 to $500 per rail for most residential gates in Tacoma, and we quote it before striking an arc.
Custom Welding
Some gates can’t be repaired with off-the-shelf parts, especially when the driveway climbs at a grade. Our welders fabricate slope-compensated frames, extended hinges, custom latch plates, and heavier bottom rails right in the driveway. In the Stadium District and along N Skyline Drive, where standard square-hung gates bind at the top corner within a season, this is the fix that actually lasts. Custom welding work in Tacoma is quoted by the job, not the hour. Small bracket and plate repairs start around $150. Full frame rebuilds run $500 to $1,400 depending on gate width and steel gauge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tacoma
We service operators and openers from DoorKing, Viking, Ghost Controls, and the other major gate brands, and we stock common replacement boards, arms, and rollers here for Tacoma’s repair calls. When a DoorKing actuator fails on a shared driveway off S 12th Street or a Ghost Controls arm strips on a North End hillside gate, we can usually replace it the same trip. Parts are matched to the model and installed with the existing safety system kept intact.
Common Gate Parts & Welding Problems We See in Tacoma Homes
- Rotted hinge posts from persistent soil moisture. Tacoma’s winters keep the ground wet for months at a time. Posts set directly in the dirt, common on pre-1930 Craftsman homes, hold water at the base and fail from the inside out. The gate sags, drags, and pulls the hinges out of plumb.
- Seized or snapped hinges near the waterfront. The salt air off Commencement Bay cuts the life of uncoated steel hardware dramatically. We regularly replace hinges on gates set back two miles from the water that look like they spent a decade on a dock. Galvanized or marine-grade is the only thing that lasts here.
- Binding swing gates on hillside driveways. The bluff-top streets in the North End and Stadium District run steep, and saturated hillside soils let posts shift. A gate that swung smooth in July will bind at the top corner by February. The fix is a raked frame or grade-compensating hinges, not just tightening the bolts.
- Failing rollers and track on narrow lots. Where Tacoma lots run tight and a swing gate won’t clear the driveway, slide gates are the answer. But the bottom rollers on steel slide gates collect grit, rust, and fail under load. We replace wheels, clean track, and weld reinforcement plates before the gate starts jumping.
Pricing for Gate Parts & Welding in Tacoma, WA
A typical gate parts repair in Tacoma runs $180 to $750 depending on what failed. Hinge replacement usually lands between $180 and $420. Post replacement runs $325 to $750. Custom welding on a Tacoma hill lot starts around $150 for a small bracket and reaches $1,400 for a full frame rebuild on a heavy steel slide gate. Gate rollers run $90 to $250 per set installed. You get the price in writing, agreed before we start the work. No surprises at the end. We also stand behind every job with the 90-Day Done Right Promise, and we offer $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
Key Takeaways for Tacoma Homeowners
- We answer the phone around the clock, and we’re local to the Tacoma area, not a call center.
- Every repair is quoted upfront, in writing, before any work starts.
- Marine-grade hardware is standard near Commencement Bay, not an add-on.
- We weld on site, so your gate stays in your driveway through the repair.
- The 90-Day Done Right Promise is written on every invoice.
We Also Serve Cities Near Tacoma
In addition to our work across Gate Parts & Welding in Tacoma, we roll out to Fircrest, Waller, Fife, and University Place most weeks. Same care, same written pricing, same 90-Day Done Right Promise.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tacoma
The North End sits less than two miles from Commencement Bay, and Tacoma’s industrial waterfront pumps salt-laden air across those neighborhoods nearly every day. Uncoated steel hinges on wood or iron gates here typically seize or snap within two to three years, even on streets that never see a shoreline view. We install galvanized or marine-grade hinges as standard in the North End because standard hardware simply will not hold up. Call (877) 610-2993 and we’ll tell you exactly what’s on your gate now and what it should be.
Usually, yes. On Tacoma’s Craftsman-era homes, the gate itself is often still solid cedar or fir. The failure is almost always the post at the hinge side, rotted at ground level. We replace the post, set it below grade with proper drainage, and re-hang the original gate with new hinges. The gate stays in your driveway through the whole job. If the frame itself has racked, we weld in reinforcement before re-hanging. Call us for a free on-site look at what your gate actually needs.
Yes. On tight lots in the South End and near the Stadium District, where a swing gate would foul the sidewalk or bind against a retaining wall, a slide gate on rollers is the practical answer. We install and service the track, rollers, and our Gate Motor & Opener in Tacoma, and we stock replacement wheels locally. A slide gate is also the better choice on steep uphill driveways where a swing gate would rack. We quote the full job in writing first, and the estimate is free.
On shared driveways and rights of way, we keep vehicle and pedestrian access open while we work. We fix the gate in place, weld in sections, and make sure the existing operator stays functional for whoever needs to come and go. If the operator needs to come offline briefly, we clear that with you and the neighbors first, and we stage the work so no one is blocked in. When we’re done, we test the full Gate Access Control in Tacoma, the safety photocells, and the closing force to make sure it meets UL 325.
Tacoma’s hillside soils stay saturated through the winter, and the posts on a steep lot shift incrementally as the ground moves. A gate that was hung square in August binds at the top corner by February because the upper hinge has pulled out of line. On a bluff-top home in the Stadium District, we replaced a rotted hinge post and re-hung a custom cedar swing gate with a grade-compensating raked frame so it wouldn’t bind on the slope. That’s the permanent fix, and it starts with a free look at your gate. Call (877) 610-2993.
Contact Gatewood Fence & Gate in Tacoma
When your gate won’t close, when the post is rotted, or when the hardware is rusted past saving, call us. We’ll answer, we’ll listen, and we’ll show up with a truck that has the parts on it. Quoted upfront, done on site, covered by the 90-Day Done Right Promise. Call (877) 610-2993 today for a free estimate, or to talk through what you’re seeing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tacoma and surrounding communities since 2001.