Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Spokane Valley
Gate parts and welding in Spokane Valley usually means one of three things: a hinge post that’s heaved out of square, a frame that’s racked from the spring wind, or an HOA gate that needs a part somebody stopped making. We handle all three. Hal Gatewood has been fixing gates since 2001, and our crew welds on site in your driveway so the gate never leaves your property. Call (877) 610-2993 and a live person answers, day or night. Not a recording, not a call queue. Somebody who knows Spokane Valley.
Key takeaways:
- On-site welding and post re-setting done at your Spokane Valley home, not shipped to a shop
- 90-Day Done Right Promise in writing on every job
- Free estimates and upfront pricing agreed before we touch a tool
- HOA architectural approval guidance for gate style changes in Spokane Valley
Why Gatewood Fence & Gate Is Spokane Valley’s Preferred Gate Parts & Welding Company
We’re not a franchise van that rolled into town last spring. Hal Gatewood’s name is on the shop, on every invoice, and on the line when he tells you what the quote will be. He’s been at it since 2001, and the address is published. You want to see the shop, drive over and look him in the eye. That’s the oldest accountability there is.
Spokane Valley homeowners keep calling us back because we repair before we replace. A bent rail gets straightened and re-welded when that’s the right fix. A post that’s heaved gets excavated, re-set, and packed properly, not shimmed with a couple of washers and called good. When the frost heave season kicks in every March, we’re the ones digging out hinge posts across 99216 that dragged all winter.
We also know the HOA landscape here. Many of the newer subdivisions along the eastern and southern growth edges have architectural review committees that require approval before you change a gate’s style, height, or finish. We’ll help you put together the submittal so the committee sees exactly what they’re approving. That’s time saved before a single hinge gets unbolted.
Our Gate Parts & Welding Services in Spokane Valley
Four repairs dominate our work here, and they’re all connected to the same two forces: frost heave in the gravelly soils and wind racking along the I-90 corridor. Here’s how we handle each one.
Hinge Replacement
Spokane Valley’s gravelly, frost-susceptible soils push posts up and out of plumb every winter. By March, hinges are binding, screws are stripped, and gates drag. We don’t just throw bigger lag bolts at it. We through-bolt hinges when the post is sound, re-set the post when it isn’t, and add a diagonal brace so the next season doesn’t re-strip the same screws. A hinge replacement in Spokane Valley runs $180 to $390 depending on post condition and whether the frame needs reinforcement.
Post Replacement
This is the most common repair we do in 99216, full stop. A frost-jacked post is not fixable with hardware adjustment. The post has to come out, the hole has to go deeper, and the new post has to be set with proper drainage so another freeze-thaw cycle doesn’t push it back up. We do the excavation, the concrete work, and the re-alignment, then hang the gate and adjust everything back to square. Post replacement in Spokane Valley typically runs $350 to $800 including materials, concrete, and re-hanging the gate.
Rail Repair
Wide gates on open lots catch channeled westerly winds along the I-90 corridor. Over time that racking bends rails and stretches welds. We do a lot of rail straightening and re-welding here, especially on RV-access gates in the flatter stretches of 99216. If the frame is still sound, we weld it straight and add bracing. Rail repair runs $150 to $450 depending on how far the frame has twisted and whether we need to re-weld multiple joints.
Custom Welding
When a gate frame breaks, we weld on site in your driveway, not at a shop across town. That means the gate stays in place, the hinges stay aligned, and we can see the whole assembly while the weld cools. We weld steel and aluminum, build custom braces and reinforcement plates, and match the existing finish as closely as the manufacturer’s specs allow. Custom welding for gate repair in Spokane Valley starts around $120 for a single clean break and runs up from there based on the amount of fabrication needed.
This is the core of our Gate Parts & Welding work: fix what’s there when it’s fixable, and tell you straight when it isn’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Spokane Valley
We’re certified on nine major gate brands, and we service them in place: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Spokane Valley HOAs running older LiftMaster and FAAC operators on shared entry gates, we keep common replacement parts in stock so we’re not waiting a week on a distributor. We’ll match the part to the manufacturer’s spec. No generic substitutions on safety edges or operator limits, ever.
Common Gate Parts & Welding Problems We See in Spokane Valley Homes
After 24 years of working these neighborhoods, here’s what actually fails, in the order we see it:
- Frost-jacked posts in sandy gravel. Hard winter freezes push posts up through the valley’s porous soils, and every spring the gate binds or drags. Re-setting the post is the real fix, not adjusting the hinge. We see this every year in 99216, and the fix holds when the post goes deep enough.
- Racked frames on RV-access gates. Spokane Valley has one of the highest RV and boat ownership rates in the region, and those wide gates sit on open lots catching the I-90 wind. Frames twist, welds stretch, hinges strip. Through-bolt upgrades and diagonal bracing stop the next rack before it starts.
- HOA vinyl and ornamental iron hardware fatigue. The postwar through 1990s ranch homes in Spokane Valley have plenty of chain-link and wood gates hitting 30 to 50 years old. The hardware is done. Hinge pins wear oval, rollers seize, latches stop catching. And in the newer eastern subdivisions, the HOA-governed ornamental iron gates fail on one narrow set of manufacturer-specific hinges and rollers. We carry the exact parts.
- Wind-stripped hinge screws along the I-90 corridor. Gates on open lots near the freeway catches channeled westerly gusts that progressively rack the frame. A heavier hinge alone isn’t enough. The post needs through-bolting and the gate needs bracing. We’ve done enough of these to know what survives the next wind season.
Pricing for Gate Parts & Welding in Spokane Valley, WA
Here’s the honest range based on what we’ve billed in Spokane Valley over the last few years:
- Hinge replacement: $180 to $390
- Post replacement (including concrete and re-hanging): $350 to $800
- Rail repair and re-welding: $150 to $450
- Custom welding (single break): from $120
- Full gate re-alignment after frost heave: $120 to $280
The written estimate is the price. We quote it before we start, you approve it, and that’s the number on the invoice. No trip charge inside the county. And take $40 off any repair over $200 if you mention it when you call (877) 610-2993. Seniors and veterans get a permanent 10% discount, no haggling needed.
We Also Serve Cities Near Spokane Valley
Most of our work stays in Spokane Valley proper, but we take calls in the surrounding communities too. If you’re in Veradale, Opportunity, Dishman, or Liberty Lake, you’re close enough that the response time’s about the same. For anything in those areas, the same crew comes out and the same 90-Day Done Right Promise applies. See our full coverage on the Gate Parts & Welding in Spokane Valley page.
Serving Spokane Valley, WA - Our Local Coverage Area
We’re based in the Spokane Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Spokane Valley
Most Spokane Valley HOAs with gate standards do require architectural review committee approval before you change the style, height, finish, or type of gate, especially in newer subdivisions along the eastern and southern growth edges. The committee usually wants a drawing, material specs, and sometimes a photo of a similar completed gate. We’ll help you put the submittal together so the board sees exactly what they’re approving, and we’ll build to the approved spec. The approval process is normal, not a roadblock, and we walk you through it. Call (877) 610-2993 and we’ll tell you what your specific HOA is likely to require.
Because the valley’s gravelly, frost-susceptible soils heave posts upward during winter freezes, and when things thaw in March, the post hasn’t settled back to where it started. The gate is now out of square, and no amount of hinge adjustment fixes a post that’s moved. The real repair is re-setting the post deeper with proper drainage, then through-bolting the hinges and re-aligning the frame. We do this repair more than any other in Spokane Valley, and it holds. Call (877) 610-2993 for a free look at what your post is actually doing.
Yes. We coordinate the work with your management company and whichever access system you’re running, and we schedule physical repairs so the gate stays operational on the keypad during the hours residents actually need it. When the gate has to come offline briefly for a weld or a post re-set, we do that work in the window the board approves and get access restored the same day. This is standard work for Spokane Valley HOAs, and we know the systems: Linear, DoorKing, and FAAC keypads are the most common on shared entry gates here.
No. The wind loading on a wide RV gate on an open lot near the I-90 corridor racks the whole frame, and a heavier hinge just moves the failure point into the post and the welds. The fix is through-bolting the hinges into the post, adding a diagonal brace to stiffen the frame, and checking the operator limits after the reinforcement so the motor isn’t fighting the new geometry. We did exactly this for a swing gate in the Painted Hills neighborhood after frost heave and wind had it dragging by two inches: re-set the post, through-bolted the hinges, braced the frame, replaced the worn latch, and adjusted the operator limits to match. It still swings clean two winters later. Call (877) 610-2993 and we’ll take a look at yours.
We keep the wear parts for older LiftMaster and FAAC operators in stock because so many Spokane Valley gated communities run them. Limit switches, safety edges, control boards, receiver modules. If we don’t have the exact part on the truck, we can usually source it same-week from our local distributors, faster than a national outfit that has to route everything through corporate. And we install the manufacturer-spec part, not whatever generic fits. Call (877) 610-2993 with your operator model number and we’ll tell you what we have and what it’s going to cost.
Call Gatewood Fence & Gate for Gate Parts & Welding in Spokane Valley
If your gate is dragging, racking, binding, or just not closing square, call (877) 610-2993 and Hal will talk you through what he thinks is happening. No charge for the phone call, no charge for the estimate inside Spokane County, and no invoice number you didn’t approve first. The name is on the shop and the shop is down the road. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Spokane Valley since 2001.