Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Southwest Ranches
If you’re in Southwest Ranches and a heavy gate has torn a hinge loose or a post has started leaning after a hard rain, you need someone who understands what these gates go through. Gate parts and welding in Southwest Ranches isn’t the same work you’d do in a gated subdivision with a 10-foot aluminum gate. Our crews work on 16 to 20 foot steel and wrought-iron estate gates every week, weld on site so the gate never leaves your driveway, and stand behind every job with a written 90-Day Done Right Promise. Call (877) 610-2993 and a live person answers, day or night.
Gate Parts & Welding in Southwest Ranches: What You’re Up Against
Southwest Ranches is one of the few incorporated towns in South Florida that explicitly protects its rural, equestrian character by zoning, meaning a large share of properties are working horse ranches and estate lots of 1.25+ acres with long private driveways. Gate parts and welding calls here disproportionately require heavy-duty double-swing and slide gate hardware sized to clear 16 to 20 feet of width for horse trailers, livestock haulers, and wide farm equipment, a spec demand that doesn’t exist at scale in neighboring Weston, Davie, or Pembroke Pines. When a 20-foot gate sags, the forces on the hinge post are enormous. A hinge that was fine on a 10-foot gate becomes a weekly failure waiting to happen. That’s why our Gate Parts & Welding work in Southwest Ranches starts with the ground under the post, not just the bracket on the post.
The other thing we see constantly across zip code 33330 is soil. Southwest Ranches sits in Broward County’s low-elevation flatlands. After South Florida’s summer convective storms, water stands. It isn’t dramatic flooding. It’s ground that stays saturated for weeks. Concrete footings poured in that soil heave and shift, and a shifted footing means a leaning hinge post, which means a gate that won’t latch, a motor that grinds, and a top hinge that eventually tears off the post. We fix the footing, not just the hinge, because fixing the hinge alone means you call us again in six months. A gate sags in the hinge post, not in the middle, and that is where we start.
Why Gatewood Fence & Gate Is Southwest Ranches’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and he still runs it himself. The name is on the shop, the license number is published, and if something isn’t done right, the 90-Day Done Right Promise says we come back, no argument, no phone tag. Homeowners in Southwest Ranches who’ve already been burned by a national outfit that quoted one price on the phone and charged another at the door tend to appreciate that. We quote the price before any work starts, and the price you agree to is the price you pay.
Scheduling is coordinated from our South Florida office, and crews serve Southwest Ranches locally. That means we know the roads, we know the ranches off Sheridan Street and Sterling Road, and we know what a gooseneck trailer needs for clearance. We’ve been called to homes near Griffin Road where a gate was hung wide enough for a single horse trailer twenty years ago, and now the owner has a gooseneck rig that needs another 18 inches of swing. That’s a width-extension and re-hang job, and it’s exactly the kind of custom welding repair we do on site.
A real person answers the phone 24 hours a day at (877) 610-2993. No voicemail tree, no call center, no chatbot. When you call, you talk to someone who can tell you whether you need a hinge replaced or a post reset, and give you a straight answer about what it costs. If you’d rather look someone in the eye before you spend money, you can drive to the shop. Hal will walk out and talk to you himself. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is.
Our Gate Parts & Welding Services in Southwest Ranches
Hinge Replacement
Hinges on Southwest Ranches estate gates are lifting something far heavier than most hardware is rated for, especially on double-swing gates that open 16 feet or more. We replace broken or worn hinges with heavy-duty rated hardware sized for the actual weight and width of your gate. We also check the underlying weld points and the hinge post footing while we’re there, because in this town a hinge failure is usually the symptom, not the cause. A new hinge on a weakened post gets you a few months. We’d rather fix it so it stays fixed.
Post Replacement
Saturated soil is the biggest reason gate posts in Southwest Ranches lean and sink. We dig out the old footing, reset the post with a deeper pour designed for Broward’s wet flatland conditions, and re-hang the gate so it swings true. On many ranches off Dykes Road and Volunteer Road, the original posts were installed decades ago and were never intended to carry the load of today’s heavier gate systems. We size the replacement post and footing for your specific gate, including any automation you run.
Rail Repair
Bent or cracked gate rails in Southwest Ranches are common on wider gates that flex in wind. Hurricane-season gusts of 50 to 80 mph push against a 20-foot gate’s entire surface area, and the rail is where that stress shows up. We straighten and reinforce rails, weld cracks, and can add gusset plates where the design allows. For ornamental wrought-iron work, we match the existing pattern so the repair doesn’t stand out like a bad patch on a custom gate.
Custom Welding
We weld on site. That matters for Southwestern Ranches residents with custom gates that can’t be disconnected and hauled to a shop without cutting through the automation, the posts, or both. Our crew brings the welder to your driveway and works on the gate in place. We’ve fabricated and repaired everything from damaged ornamental scroll work to complete width-extension jobs for equestrian gates that needed to clear wider trailers. We also build reinforced gussets, mend snapped hinges, and repair rusted tube steel. Fix the panel without the post and you’ll fix it twice; we fix both, and we do it without hauling your gate away.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southwest Ranches
Most automatic estate gates in Southwest Ranches run on a handful of operator brands, and we service all the majors. That includes FAAC, BFT, Linear, and Viking systems, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. Because we see these systems across Broward County daily, we keep a solid stock of common parts, hinges, rollers, and operator components ready to go. That means less waiting on an order and more same-day fixes for our Southwest Ranches customers. If your gate is older or the brand isn’t one you recognize, that’s fine too. Bring us a photo or the model number, and we’ll tell you honestly whether it’s worth repairing.
Common Gate Parts & Welding Problems We See in Southwest Ranches Homes
- Leaning hinge posts after heavy rain. Saturated soil in Southwest Ranches undermines post footings, sending hinge posts out of plumb until the latch misses and the gate binds. The permanent fix is a deeper footing, not just a new hinge.
- Gooseneck trailer clearance problems. Many older ranch gates were hung for single horse trailers. Owners upgrade to gooseneck rigs and now the opening is too narrow. We extend the gate width and re-hang it so you stop clipping the gate every time you pull through.
- Bent slide gate racks and pinions after storms. Hurricane-season winds push hard on wide 16 to 20 foot slide gates, bending the rack and misaligning the rollers. We straighten or replace the rack, re-seat the rollers, and re-tension the system.
- Torn hinges on heavy swing gates. When a 20-foot custom steel gate tears a top hinge off the post, the hinge usually failed because the post shifted. We reset the post and weld a reinforced gusset plate to the frame before re-hanging the gate.
We got a call to a ranch off Sunset Trail in Southwest Ranches where a 20-foot custom tubular steel swing gate had torn its top hinge clean off the hinge post. The post footing had shifted from saturated soil after heavy summer storms, so our crew dug out the old concrete, reset the post with a deeper footing, and welded a reinforced gusset plate to the gate frame before re-hanging it. We also replaced the worn LiftMaster operator arm and recalibrated the loop detector so the gate clears the full gooseneck trailer width without binding.
Pricing for Gate Parts & Welding in Southwest Ranches, FL
Here’s what gate parts and welding work in Southwest Ranches typically runs, so you have a real number before you call:
- Hinge replacement: $180-$340 per hinge, depending on gate weight and whether the hinge is welded or bolted.
- Post replacement with new footing: $450-$900, depending on depth, material, and whether automation conduit runs through the post.
- Rail repair or reinforcement: $250-$600, depending on the extent of the crack or bend and whether ornamental detail needs matching.
- Custom welding, full width-extension or gusset reinforcement: $600-$2,200, depending on the gate size and the amount of fabrication.
Those ranges cover the common cases we see in zip code 33330. A 20-foot gate with ornate scroll work naturally costs more than a simple 12-foot tube gate. The price we quote you up front is the price you pay, and we’ll walk the gate with you before any work starts so you know exactly what you’re getting. Right now we’re also offering $40 off any repair over $200, and if you’ve already got a written estimate from another company, bring it and we’ll give you a free second opinion. Seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate, no trip charge inside the county.
We Also Serve Cities Near Southwest Ranches
While most of our gate parts and welding work takes us around the ranches and estates of Southwest Ranches, our crews also serve Cooper City, Pine Island Ridge, Pembroke Pines, and Weston. If you’re just outside town, reach out. We cover the full Gate Parts & Welding in Southwest Ranches area, and a quick call will tell you if you’re in our zone.
Serving Southwest Ranches, FL - Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southwest Ranches
Because Southwest Ranches sits on low-elevation flatland where summer storms leave standing water that saturates the soil for weeks. Neighboring communities like Weston and Davie were built more recently, with fill and drainage systems that move water faster. Here, the native soil holds water against undermixed footings and shallow post bases, so the posts slowly lean until the gate sags and the latch misses. We fix it by resetting the post in a deeper footing sized for your gate load. That’s a $450-$900 post-replacement job in Southwest Ranches. Call (877) 610-2993 and we’ll come look at the post and tell you honestly whether it needs a reset or just a new hinge bracket.
Yes, and we do this on ranches across Southwest Ranches. The work is a width-extension and re-hang job: we measure the trailer clearance you need, fabricate the additional gate section, weld it onto the existing leaf, and then re-hang and balance the gate. We also check the posts and footings to make sure they can handle the added width. Most width extensions on estate gates run $600-$2,200 depending on the gate style and how much matching fabrication is needed. The quote you get up front is what you pay. Call (877) 610-2993 for a free measure and a written number.
We weld on-site. That’s the whole point. A custom ornamental gate on an estate off Griffin Road can’t typically be disconnected and hauled to a shop without cutting the automation wiring, the hinge pins, or both. Our crew brings the welding rig to your driveway, so the gate stays in place while we repair the scroll work, mend cracks, or reinforce the frame. In Southwest Ranches, that’s how it has to be for wide custom work, and it also means you watch the repair happen instead of wondering where your gate went. For an estimate, call (877) 610-2993.
The battery is usually not the problem. On Southwest Ranches ranches we find the operator is running too often because the gate is misaligned, a roller is dragging, or the opener arm is fighting a hinge that’s binding after the post shifted. The operator drains the battery trying to compensate for mechanical resistance. We check the gate alignment, the load on the arm, and the charging circuit before we replace a battery. If the battery is fine, we fix the mechanical issue so the operator stops draining it. We repair FAAC, BFT, Linear, Viking, LiftMaster, and every other major brand. Call (877) 610-2993 to get someone out.
That depends on what’s on the gate. If it’s an automatic vehicular gate in Southwest Ranches, it needs safety edges and secondary entrapment protection that still function after the repair. We don’t just swap a hinge and walk away. During any hinge replacement on an automated gate, we check the safety edges, the photo eye, and the operator settings. If something is out of compliance, we tell you before we finish so it can be corrected. Many older ranch gates around Griffin Road and Stirling Road were installed before modern UL 325 safety standards, and a hinge repair is the right time to bring them up to code. Call (877) 610-2993 to schedule a look.
Get Your Gate Fixed Right the First Time
If you’re in Southwest Ranches and dealing with a broken hinge, a leaning post, or an operator that keeps failing, call (877) 610-2993 now. A live person answers. We’ll give you a free estimate over the phone or come out and measure the gate in person. No trip charge inside the county, $40 off any repair over $200, and a written 90-Day Done Right Promise on every job. The name is on the shop, and Hal still answers the phone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southwest Ranches since 2001.