Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Southfield
Gate parts and welding in Southfield usually comes down to one question: can the gate be fixed where it stands, or does it need to come down? Most of the time, the answer is the first one. We weld on site, in your driveway or your office park lot, and we have been doing it that way since 2001. If your gate sags, drags, or will not open, call us at (877) 610-2993 and we will tell you straight what it needs.
Southfield is not like the residential suburbs around it. The office parks along Northwestern Highway and Telegraph Road mean we spend as much time working on barrier arms and card-reader slide gates as we do on residential driveway gates. That mix is exactly what we handle well, from Gate Installation - Southfield to repairs, and it is why property managers around 48075 and 48076 keep our number in their phone.
Why Gatewood Fence & Gate Is Southfield’s Preferred Gate Parts & Welding Company
We have been fixing gates in Oakland County for over 29 years, and Southfield has always been a core part of that work. Hal Gatewood started this company in 2001, and his name is still on the shop and on every invoice. When you call, a live person answers. Not a voicemail, not a call center. That matters when a gate is stuck open at 11 p.m. and a building full of tenants needs it secured.
The reviews from Southfield customers tell the same story: someone showed up when they said they would, fixed what was broken, and did not push a full replacement when a weld and a hinge would do. Our 90-Day Done Right Promise is in writing on every job. If it is not right, we make it right. One call brings Hal back, no runaround.
Being local means we know the Southfield housing stock. The ranch homes and split-levels built in the 1950s through 1970s have wrought-iron driveway gates that are now 50 to 70 years old. The hinge posts on those gates were set at a depth that made sense before Michigan frost heave was fully accounted for in local codes. We know what that looks like and we know how to fix it so it stays fixed.
Our Gate Parts & Welding Services in Southfield
We repair gates the way they need to be repaired, not the way a parts catalog says to swap them. Here is what that looks like in Southfield.
Hinge Replacement
Southfield’s freeze-thaw cycles are hard on hinge pins. The ground swells in winter, the post leans, and the hinge takes the load. On 1960s and 70s wrought-iron gates along streets like Lahser and Evergreen, we regularly find hinge pins worn to half their original diameter. A typical hinge replacement in Southfield runs $180 to $420 per hinge, depending on the gate weight and whether the post needs realignment at the same time.
Post Replacement
A gate sags in the hinge post, not in the middle. When we replace a post in Southfield, we dig deeper than the original, set the footing below the frost line, and weld the hinge brackets back on square. Most residential post replacements here run $450 to $900. Commercial slide-gate posts are heavier and usually run $1,200 to $2,800, especially along the office corridors where the gates are longer and carry more cycles per day.
Rail Repair
Rails on sliding gates take a beating in Southfield. Road salt from Telegraph Road and Northwestern Highway traffic finds its way onto gate tracks, and that salt accelerates corrosion on the rail and guide rollers. We weld new rail segments in place, straighten bent sections, and replace guide rollers so the gate rolls instead of grinding. Rail repair work in Southfield typically runs $250 to $650.
Custom Welding
Not everything is a replacement part. Sometimes a gate needs a section of ornamental iron recreated to match the original 1960s design, or a broken picket welded back into place, or a custom bracket fabricated for an operator retrofit. We do that welding on site. Custom welding in Southfield generally runs $95 to $175 per hour plus materials, and we will always quote a firm price before we strike an arc.
Trusted Brands We Service in Southfield
Southfield’s gate mix is heavy on automated commercial operators, so we stock parts for our Gate Motor & Opener in Southfield and stay fluent in the brands those systems use. We service Linear, Viking, Ghost Controls, and DoorKing operators regularly, along with LiftMaster, FAAC, BFT, and Elite. If your office park runs a Viking slide operator with a loop detector, we carry the boards and safety edges to fix it without waiting on a freight shipment. For residential customers in 48033 and 48086, that means the same commercial-grade knowledge comes to your driveway gate.
Common Gate Parts & Welding Problems We See in Southfield Homes
- Frost-heaved hinge posts. Southfield’s clay soil holds water, and when it freezes, the ground swells. Every spring we reset posts that leaned over the winter, stripped their hinge pins, and left gates dragging on the concrete. The fix is a deeper footing and a realigned hinge, not a new gate.
- Seized hydraulic actuators on older operators. Sub-zero temperatures congeal the fluid in legacy FAAC and Viking hydraulic units. By March, property managers along the Telegraph corridor are calling us with operators that will not move. We rebuild or retrofit those units with modern alternatives that handle Michigan winters better.
- Worn rack and pinion on commercial slide gates. A frost-heaved post puts uneven load on the rack, and the pinion chews through it. We weld new rack segments and reset the post so the gear mesh is clean. That repair runs $600 to $1,400 on a typical office park gate in Southfield.
- Mismatched safety sensors on 1970s apartment complex gates. Older entry gates often lost their photocells or edge sensors years ago, or the sensors were never upgraded to current UL 325 standards. We retrofit safety photocells and pressure edges on those gates so they actually stop when a pedestrian is in the path.
Pricing for Gate Parts & Welding in Southfield, MI
What you pay depends on the gate you have and what is actually wrong with it. Here are the ranges we see in Southfield:
- Hinge replacement: $180 to $420 per hinge
- Post reset or replacement: $450 to $2,800 depending on gate weight and post type
- Rail repair with welding: $250 to $650
- Custom welding and fabrication: $95 to $175 per hour plus materials
- Operators and control boards: $350 to $2,500 depending on the brand and whether it is a retrofit or a direct replacement
Every job is quoted and agreed before any work starts. The price we give you is the price on your invoice. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount on every job. Call (877) 610-2993 and we will walk through what your gate needs and what it will cost, no obligation.
We Also Serve Cities Near Southfield
If you are in Beverly Hills, Berkley, Huntington Woods, or Oak Park, we run calls there every week. The same crew, the same truck, the same 90-Day Done Right Promise. Gate Parts & Welding in Southfield is where most of our commercial work happens, but the residential neighbors around you are a big part of why we know this part of Oakland County so well.
Serving Southfield, MI - Our Local Coverage Area
We’re based in the Southfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southfield
The post was not set below the frost line. Southfield’s clay soil freezes up to 42 inches deep in a hard winter, and any footing shallower than that will heave. Our fix is to dig the post footing deeper than the frost line, set it in a concrete pier with rebar, and weld the hinge brackets back on square. That ends the yearly reset cycle. Call (877) 610-2993 and we will come look at what you have.
Yes, in most cases we can. UL 325 requires external entrapment protection on automated gates, and older LiftMaster residential operators often lack it. We install monitored photocells and, where needed, non-contact edge sensors so the operator meets current safety requirements. The retrofit typically runs $450 to $900. Call (877) 610-2993 for an exact quote.
It is both, and that is exactly the kind of repair Southfield’s office parks need most. The loop detector is a gate part that ties into the Gate Access Control in Southfield programming. We replace the loop, tune the sensitivity, and verify the detector is communicating with the operator board. Most commercial loop detector replacements in Southfield run $400 to $900 including the loop wire and controller. Call (877) 610-2993 and we will get your trucks moving again.
Look at where the gate sags. If the gate is square but hangs low, the hinge pins are worn. If the post itself leans or the gap at the top of the hinge has opened up, the post has moved. We see both on Southfield’s older wrought-iron gates, and most of the time the fix is new hinges and a reset post, not a new post and not a new gate. Call (877) 610-2993 and we will tell you honestly which it is.
Yes, we service both DoorKing and Viking operators regularly in Southfield’s apartment and HOA communities. We carry the boards, loop detectors, and safety edges for both brands, and we program them on site. That includes the 1970s-era complexes where the access system was installed before modern safety standards existed and has been patched together ever since. Call (877) 610-2993 for service on your DoorKing or Viking operator.
Call Gatewood Fence & Gate for Gate Parts & Welding in Southfield
When a gate will not open or will not stay shut, you want someone who will answer the phone and show up. That is us. We weld on site, we rebuild what can be rebuilt, and we stand behind every job with the 90-Day Done Right Promise. Call (877) 610-2993 now for a free estimate. Hal Gatewood will be the one making it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southfield since 2001.