Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Southaven
Gate parts and welding in Southaven usually comes down to one question: do you replace a twisted hinge and sagging post, or do you buy a whole new gate? Around here, the answer is almost always repair first. We’ve been fixing gates since 2001, and Hal Gatewood’s name is on the shop and on every invoice. If your swing gate binds, drags, or won’t stay latched, call (877) 610-2993 and talk to a live person, day or night. We’ll give you an honest read on what’s actually wrong, not a sales pitch for a gate you don’t need.
Southaven’s subdivisions grew fast through the 1990s and 2000s, and that matters. Hundreds of automated Gates went in during the same era, and most used the same builder-grade hardware. Now those parts are hitting end-of-life at the same time. Add DeSoto County’s clay soil and the Mid-South’s ice storms, and you get a repair market unlike anything in slower-growing parts of Mississippi. We know that because we work these streets every week.
Why Gatewood Fence & Gate Is Southaven’s Preferred Gate Parts & Welding Company
We’re not a franchise, and we don’t run a call center three states away. A live person answers our phone 24/7. When you call about a gate in Southaven, you’re talking to someone who knows what a windmill in Windmill Farms is, and what DeSoto County clay does to a brick pillar. That local knowledge changes the diagnosis. A homeowner calling it a “broken motor” gets a real answer: the post racked, the arm bound, and the gear set stripped. Those are three different failures with three different fixes. You want the person who can tell the difference.
Our reputation in Southaven is built on showing up when we say, quoting a price before work starts, and standing behind the job. Every repair carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround. We also hold a local presence you can verify: a published shop address, a license number, and a real owner who has been doing this for over 29 years. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Most Southaven calls we get are from homeowners between 50 and 70 who’ve been burned by a national outfit that quoted one price on the phone and charged another at the door. They’re not hunting for the cheapest bid. They want a face they’ll see again at the hardware store. That’s us. We serve Southaven directly, with crews based out of our Memphis office and scheduled locally. Response times to the 38671 and 38672 zip codes are measured in hours, not days, for repairs.
Our Gate Parts & Welding Services in Southaven
We offer full-service Gate Parts & Welding work, from a single hinge replacement to a complete post reset and custom weld. Most Southaven jobs fall into four groups:
Hinge Replacement
Hinges on ornamental iron swing gates in Southaven take a beating from humidity and ice. Rust pits the barrel, the gate sags, and the latch misses the strike. We replace hinges on site, usually same day for standard barrel and strap hinges. If the post is sound, a hinge replacement in the 38671 area typically runs $180 to $340 per hinge, including welding and alignment. If the post moved, we’ll tell you before we touch the hinge, because fixing the hinge without resetting the post means you’ll fix it twice.
Post Replacement
This is the repair most Southaven neighborhoods need and few homeowners expect. The clay under DeSoto County heaves and settles with the seasons, and over ten or fifteen years it walks a brick pillar out of plumb. A post replacement means cutting the old post at grade, digging a footer that goes below the frost and clay movement zone, setting new steel or reinforced concrete, and re-hanging the gate true. In communities like Windmill Farms, where HOA architectural standards dictate ornamental swing gates on brick-pillar entries, we match the existing look. Expect $600 to $1,200 for a single post replacement with welding and gate re-hang, depending on access and whether we’re splicing ornamental panels.
Rail Repair
When a swing or slide gate starts dragging, the rail takes the abuse. We straighten bent track, weld cracked rails, and replace worn sections. On slide gates along the western fringes of Southaven where driveways are longer and operators run higher torque, rail damage is common after ice events or when a wheel binds. Rail repair for a typical residential slide gate runs $250 to $550, plus any wheel or roller replacement. We quote the full number before we start.
Custom Welding
Sometimes the part you need doesn’t exist on a shelf, especially on 15 to 25 year old gates where the original hardware is discontinued. We weld custom hinge plates, reinforced post brackets, and gate frames on site, in your driveway. The gate stays where it belongs. Custom welding jobs in Southaven start around $150 for small brackets and run $400 to $900 for structural frame repairs. Every weld carries the same 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southaven
We service and install parts for nine major gate brands, including FAAC, BFT, Linear, and Viking. That matters in Southaven because so many subdivision gates went in with the same few builder-spec models. We know which FAAC board revisions fail, which BFT limit switches drift after an ice storm, and which Linear operators hold up to clay-induced binding better than others. We stock common parts for Southaven customers, which means less waiting on a truck from a distributor. When a part isn’t on the shelf, we get it locally fast.
Common Gate Parts & Welding Problems We See in Southaven Homes
- Clay heave racks the hinge post, and the motor gets blamed. DeSoto County’s expansive clay swells and shrinks with every wet-dry cycle. Over a few years, a brick pillar moves enough to bind the articulating arm and strip the gear set. The homeowner hears the motor strain and calls it dead. The real fix is a post reset, not a new operator.
- Builder-grade operators on 1990s and 2000s HOA gates stall and strip plastic gear sets. Southaven’s growth wave put a lot of entry-level LiftMaster and Linear units on gates they were never quite rated for. When the gate binds, the plastic gears go first. An upgrade to a higher-torque FAAC or BFT unit often fits the existing posts, so you don’t need new masonry.
- Manual gates converted to automation by the original builder often lack dedicated conduit and a proper power run. We regularly find buried UF cable chafing against the post footing or tripping the safety loop detector. In 38672 new construction especially, builders left the gate manual and the power was an afterthought. We run the conduit correctly, with a proper weatherhead and a dedicated circuit.
- Mid-South ice storms crack plastic gear sets and bend articulating arms overnight. Southaven gets ice events that central Mississippi rarely sees. Ornamental swing gates with no defrost cycle freeze, the motor torques, and something gives. The same freeze spalls brick around the hinge post and accelerates rust pitting. After an ice storm, we see a surge of the same failures across the whole metro.
Pricing for Gate Parts & Welding in Southaven, MS
Here’s what we quote in Southaven, straight up. A hinge replacement on an ornamental swing gate runs $180 to $340 per hinge. Post replacement with gate re-hang runs $600 to $1,200 depending on access and whether we’re splicing decorative panels. Rail repair on a slide gate runs $250 to $550 plus wheels or rollers. Custom welding starts at $150 for small brackets and runs $400 to $900 for structural frame repair. A full operator upgrade from a builder-grade unit to a higher-torque FAAC or BFT runs $800 to $1,800 installed, including limit setup and safety verification. Every quote is written and agreed before any work starts. No trip charge inside DeSoto County, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Southaven
We work all over Southaven and the surrounding DeSoto County communities, including Horn Lake, Olive Branch, and Hernando. If you’re just outside the city line, the same crew, the same pricing, and the same 90-Day Done Right Promise apply. We schedule Southaven-area jobs together to keep drive time short and response fast.
Serving Southaven, MS - Our Local Coverage Area
We’re based in the Southaven area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southaven
Because your hinge post is moving, not your motor. DeSoto County clay swells with spring rain and settles through summer drought, walking brick pillars out of plumb a fraction at a time. The gate frame racks, the articulating arm binds, and the operator strains. A post reset on a deep concrete footer fixes the root cause. Expect $600 to $1,200 for a full post replacement with gate re-hang depending on access and the condition of the surrounding masonry. Call (877) 610-2993 and we’ll tell you if the post is the problem before quoting anything.
If the post is plumb and the hinge barrel is the only worn part, a new hinge is enough, $180 to $340 per hinge installed. If the hinge plate tore away from the post or the gate frame cracked at the weld point, you need a welded repair. We do that on site: $150 to $400 for a reinforced hinge plate and structural weld. In Windmill Farms specifically, we see a lot of gates where the original hinge was under-built for the gate weight, and a weld-in reinforcement beats replacing the hinge every few years. Call (877) 610-2993 for an honest assessment.
Yes, in most Southaven subdivisions we can mount a higher-torque FAAC or BFT operator on the existing posts without touching the masonry. The mounting pattern usually adapts, and we reinforce the post bracket with a welded plate where needed. An upgrade runs $800 to $1,800 installed, including limit setup and safety verification. If the post itself has moved from clay heave, that gets fixed first, or the new operator will fail the same way. Call (877) 610-2993 for a free estimate.
Yes. This is one of the most common calls we get in the newer 38672 developments. The builder left the gate manual and never ran conduit. We install a dedicated circuit from the panel or sub-panel, run it through buried conduit to the gate post, and mount the operator with proper weather sealing. If a safety loop or photo eye is needed for entrapment protection, we install that at the same time. A full automation retrofit with a Linear or BFT operator starts around $1,200 to $2,200 depending on the power run distance and gate size. Call (877) 610-2993 for a written quote.
Test it. Place a solid object, like a trash can, in the gate’s path and close it. The gate should reverse. That’s the UL 325 entrapment protection standard, and it applies to every automated gate in Mississippi. If the gate keeps pushing, the safety system is failed or bypassed. This is a serious safety issue, not a convenience issue. We test entrapment protection on every operator service in Southaven, and we won’t leave a gate operational if the safety edges or photo eyes aren’t working. Call (877) 610-2993 and we’ll test yours.
Contact Gatewood Fence & Gate in Southaven
If your gate is binding, sagging, or dead after a storm, call (877) 610-2993 now. A live person answers 24/7, not a voicemail or a chatbot. We’ll give you a straight answer about what’s wrong, a written price before any work starts, and the 90-Day Done Right Promise in writing. We serve Southaven, Horn Lake, Olive Branch, and Hernando, with free estimates and no trip charge inside the county. If you’d rather talk face to face, the shop is down the road and Hal will shake your hand.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southaven and DeSoto County since 2001.