Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across South Gastonia
When a gate post leans or a hinge tears loose in South Gastonia, you don’t need a sales pitch. You need somebody who knows why it failed, has the parts on the truck, and will fix it without replacing half the gate. We’re Gatewood Fence & Gate, and we’ve been doing gate repair in Gaston County since 2001. Hal Gatewood owns the company, answers the phone, and shows up on the jobs around South Gastonia. Call (877) 610-2993 any hour and you’ll get a live person. Most South Gastonia calls get same-day or next-day service, depending on what’s wrong.
Why Gatewood Fence & Gate Is South Gastonia’s Preferred Gate Parts & Welding Company
South Gastonia isn’t like the newer subdivisions up in Gastonia proper. The housing stock here is older. The soil is different. The gates are different. We’ve worked the mill-village bungalows, the post-war ranchers on the south corridors, and the commercial slide gates behind the textile-adjacent facilities. We know this ZIP. Hal started this company in 2001 and built it on one thing: fixing what’s there instead of selling you a whole new gate because the markup is better. That’s why customers in South Gastonia keep our number saved.
Reputation here is a door-to-door thing. You’ll see us at the hardware store, you’ll see the truck on South New Hope Road. Nobody in South Gastonia wants a faceless outfit that quotes one number on the phone and another at the door. Our price is quoted and agreed before any work starts. And the 90-Day Done Right Promise is stamped on every invoice. If it’s not right, call, and we make it right. That’s the whole deal.
Scheduling for South Gastonia is handled out of our Charlotte office, and crews serve 28052 daily. Response time into South Gastonia runs 60 to 90 minutes for true emergencies, and same-day is common for most hinge and post failures. We’re not a dispatch queue. We’re the person who will be in your driveway, and Hal’s name is on the invoice.
Our Gate Parts & Welding Services in South Gastonia
A gate is only as good as the parts you hang on it and the post holding it up. In South Gastonia, the red clay dictates most of what we do. That’s where our Gate Parts & Welding team earns its keep. These are the most common calls across 28052.
Hinge Replacement
On 1940s and 1950s chain-link and ornamental gates around South Gastonia, the hinge is usually the first thing to fail. Decades of Piedmont clay holding moisture against the steel mean rust doesn’t just surface-coat the hinge. It eats the pin from the inside out. We replace hinges on-site, match the existing swing geometry, and weld or bolt fresh plate where the old boss has thinned out. If the gate still moves on its own after a hinge swap, the post is the problem, not the hinge.
Post Replacement
Here’s what we see more in South Gastonia than almost anywhere else in the county: a properly set steel post, installed ten or fifteen years ago, leaning two or three inches out of plumb after one wet winter. The red clay expands and contracts with moisture, and the post foundation moves with it. We dig it out, widen the footing, set a new steel post with proper concrete and gravel drainage, and rehang the gate dead plumb. Post replacement on a standard residential swing gate in South Gastonia typically runs $450 to $900, depending on the gate weight and whether we’re keeping the original panel.
Rail Repair
Rusted-through top and bottom rails on older mill-village gates are another constant. We weld in new rail sections on-site. No hauling the gate to a shop. No telling you it can’t be saved because it’s easier to sell a new one. Most rail repairs on typical South Gastonia residential gates land in the $180 to $320 range. If the top rail is bowed from kids swinging on the gate, we straighten or section-replace and weld it solid.
Custom Welding
Sometimes the part that broke doesn’t exist anymore. It was fabricated in 1962 by a now-defunct mill supply house and nobody makes a replacement. That’s why Hal welds on-site. Custom bracket work, post caps, hinge bosses, slide-gate roller plates, latch reinforcement. We’ve fabricated repair plates for ornamental iron gates on South New Hope Road and custom hinge conversions on 1950s chain-link systems off Lowell Road. If it’s steel, we can make the part.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Gastonia
Most South Gastonia gates run on operators that have been around longer than the homeowner’s current car. We service and stock parts for Linear and DoorKing operators, plus Viking and Ghost Controls on the newer systems. Old control boards, new safety photocells, remotes, limit switches. We keep the common failure parts for those brands on the truck so a South Gastonia call usually means one trip, not two.
Common Gate Parts & Welding Problems We See in South Gastonia Homes
- Rusted hinge posts snapping at the base. Decades of red clay wicking moisture against buried steel means the post rots from the ground line down. The gate still looks fine up top, but the hinge post is paper-thin at the dirt. When it goes, the whole gate drops.
- Control boards fried during winter ice storms. Voltage spikes along the mill-corridor power lines knock out gate control boards more often here than in newer subdivisions. You’ll hear the breaker trip, or the operator goes dead with no warning. Usually it’s the board, not the motor.
- Sagging ornamental iron gates from shallow footings. Many of the older South Gastonia iron gates were set in footings far too shallow for the freeze-thaw cycles we get. The hinge post lifts a quarter inch each winter until the gate drags on the ground.
- Obsolete operators with no safety edges. Gates hung before UL 325 entrapment standards existed. They run on boards you can’t get anymore and there’s no photocell on the pinch point. We retrofit what’s safe and tell you straight when replacement is actually cheaper.
Pricing for Gate Parts & Welding in South Gastonia, NC
Here’s straight numbers for 28052. Hinge replacement typically runs $150 to $325 per hinge, depending on the gate weight and hardware. Post replacement runs $450 to $900 residential, and $900 to $1,800 for heavy commercial slide-gate posts along the mill corridors. Rail repair runs $180 to $320. Custom welding work, like fabricated brackets or reinforcement plates, usually runs $150 to $400, quoted before we strike an arc. If your repair is over $200, take $40 off. No trip charge inside the county, a free second opinion on any written estimate, and seniors and veterans get 10% off permanently. You’ll know the price before we start. Call (877) 610-2993 and we’ll give you a real number.
We Also Serve Cities Near South Gastonia
Our crews work South Gastonia daily, but we also cover Gastonia proper, Bessemer City, Belmont, and Mount Holly. If you’re right on the line between South Gastonia and Bessemer City, you’re still in our service area. Same pricing, same warranty, same live person on the phone.
Serving South Gastonia, NC - Our Local Coverage Area
We’re based in the South Gastonia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in South Gastonia
Yes. In nearly every case, the gate panel itself is fine. The post is moving in the red clay. We remove the post, widen and deepen the footing, add gravel drainage at the base, and reset it in concrete. Most South Gastonia post re-sets run $450 to $900, and your gate panel stays put. Call (877) 610-2993 for an exact quote. Estimates are free.
If the hinge boss is rusted thin but the post itself is still solid below the ground line, we can weld a new hinge plate to the post and retap the hinge threads. That’s usually a $150 to $325 fix. If the post is flaking or has visible rot extending into the dirt, welding won’t hold. Then it’s post replacement, starting around $450. We’ll tell you which one it is before we do anything. Call (877) 610-2993.
Usually, yes. On Viking, DoorKing, and older Linear slide operators, the board is often the only thing that died. We can swap in a compatible board, rewire the limit logic, and add a current-sensing safety edge to bring it up to UL 325 entrapment standards. A retrofit board runs roughly $400 to $800 installed. If the motor’s windings are shot too, we’ll tell you straight that a new operator is the cheaper move. Call (877) 610-2993.
Because a gate sags in the hinge post, not in the middle. The latch-side drop is almost always the hinge post leaning out of plumb. Tightening bolts on the panel just masks it for a week. In South Gastonia, the red clay heaves that post a little more every season. The fix is a post re-set and hinge re-alignment, not more bolt torque. That runs $450 to $900 on most residential gates here. Call (877) 610-2993 and we’ll put eyes on it.
We do. South Gastonia’s industrial side keeps us on commercial cantilever and V-track slide gates regularly. These are heavier gates on bigger posts, and the red clay moves them just the same. Commercial post replacement and rail work typically runs $900 to $1,800 depending on gate length and post size. We schedule a site visit, measure it, and hand you a written price before any work starts. Call (877) 610-2993.
If your gate’s leaning, rusted, or just doesn’t close right anymore, call (877) 610-2993. You’ll get Hal or one of his crew. We’ll tell you what’s wrong, what it costs, and when we’ll be there. No voicemail, no call center, no runaround. That’s how it’s been in South Gastonia since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving South Gastonia and Gaston County personally since 2001.