Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Solon
Gate parts and welding work in Solon usually comes down to one of three things: a hinge post that frost has pushed out of square, an ornamental iron rail that road salt has eaten through, or a slide gate on a shared driveway that has to keep working while we fix it. We handle all three, and we do the welding right where the gate hangs, not back at some shop across town. If you’re off SOM Center Road, Bainbridge Road, or anywhere in the 44139 zip, Hal Gatewood and his crew can be at your driveway, truck stocked with the hinges, weld plate, and roller hardware your gate was built with. Call (877) 610-2993 and a live person answers, day or night.
We have been fixing gates since 2001, and we’ve seen what Solon’s winters do to the ironwork around here. The jobs are predictable if you know the soil and the salt. That’s what makes a local welder different from a chain that sends a different face every visit.
Why Gatewood Fence & Gate Is Solon’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Solon homeowners call us because our phone gets answered by a person in Cleveland who knows gates, not a queue. When a hinge pin snaps on a 30-year-old wrought-iron driveway gate off Bainbridge Road, you want a voice that can say “my guy will be there this afternoon” and actually mean it.
Our crew works Solon regularly. We know the Home Days traffic patterns, the HOA notification rules in the planned communities, and which subdivisions have shared rights of way where a swing gate was never an option. Reviews from Solon customers point to the same two things: the repair-first approach and the fact that the person who quoted the job is usually the person doing the welding. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back, no runaround.
We are licensed, insured, and bonded, with a published address and license number anyone can look up. Hal has been at this since 2001, which means he’s not passing through. He’s fixed gates in Solon that other companies wrote off as too far gone, and he’ll tell you honestly when a full replacement is the smarter money.
Our Gate Parts & Welding Services in Solon
Most of our Solon work falls into four buckets. Here’s what that looks like in practice, on real gates in this city:
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. We cut out the worn hinge barrel, weld in a new pin and bracket set, and re-hang the gate so it clears the latch and swings true. In Solon, the hinge is usually the first casualty of freeze-thaw cycling, because ice forms inside the joint and every cycle widens the gap a few thousandths more. We keep a range of ornamental and heavy-duty weld-on hinges on the truck so we’re not ordering parts and leaving your gate on the ground.
Post Replacement
Clay-heavy soil in the Chagrin River watershed means posts heave. We’ve pulled posts in Solon that moved nearly two inches in a single hard winter. When a frost-shifted post throws a slide gate out of alignment, the fix isn’t cranking the operator or chasing photocells. The fix is digging out the old footing, setting a new post with proper depth, and welding the brackets back square. Fix the panel without the post and you’ll fix it twice. We quote post replacement with the footing work included, so there’s no surprise line item when the concrete comes out.
Rail Repair
Cuyahoga County’s road brine is hard on ornamental iron. We regularly see rail ends, picket tips, and bottom rails rusted thin on HOA entrance gates within half a mile of the major arteries. Our welders cut out the compromised section and weld in new steel matched to the existing profile, then prime and paint to spec. For a 25-year-old Wrought Iron community gate on SOM Center Road, that’s usually a one-day job that leaves the gate structurally sound for another 25 years.
Custom Welding
Shared driveways and rights of way in Solon often force gates into narrow setbacks where off-the-shelf hardware won’t fit. We fabricate custom hinge plates, extended rack mounts, drop rods, and weld-on stops that make a slide gate work inside a 6-inch post pocket. If you need a latch relocated, a pedestrian gate added to a driveway gate, or an operator mount reinforced, we weld it in place and you can watch us do it. That’s the difference between buying a part and getting a fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Solon
We service and stock parts for the brands Solon’s older gates were built around, including Viking, Ghost Controls, DoorKing, and Elite. These are the operators and access systems that show up on 1990s and 2000s HOA installs across Solon, and we keep common boards, remotes, photocells, and limit switches available so we’re not waiting on a distributor while your gate sits open. Our Gate Parts & Welding team can match most existing hardware without a full operator swap, and we’ll tell you plainly when a retrofit makes more sense than nursing a 30-year-old board through another winter.
Common Gate Parts & Welding Problems We See in Solon Homes
- Frost-shifted hinge posts on swing gates. Solon’s heavy freeze-thaw cycles push clay soil upward unevenly, and the post moves with it. The gate binds at the latch or drags on the rail even though nothing “broke” in the operator.
- Salt-brine corrosion on ornamental iron. Road salt from SOM Center Road and Bainbridge Road accelerates rust on hinge pins, rail ends, and weld joints, especially on gates within throwing distance of the road. We cut out what’s thin and weld new steel in before the panel sags into the ground.
- Slide gate rack and weld plate failure on shared driveways. Shared rights of way in Solon push gates into narrow setbacks with minimal drainage, so the plate that holds the rack to the post sees standing saltwater every winter. When it corrodes, the gate jumps teeth and the operator fights itself.
- Aged loop detectors and keypad systems on HOA entrances. The gate hardware itself might be fine, but a sagging panel from a failed weld defeats the loop detector and the keypad, which thinks the gate is moving when it’s just hanging crooked. We fix the weld first, then the electronics.
Pricing for Gate Parts & Welding in Solon, OH
A hinge replacement on a standard ornamental iron driveway gate in Solon typically runs $180 to $340 including the new hinge set and welding time. Post replacement with footing work usually lands between $450 and $900 depending on post size and whether we’re digging through frozen ground or existing concrete. Custom welding jobs are quoted by the piece, and most of the bracket repairs, rail patches, and weld-on stop work we do runs $120 to $400. Every quote is given before we pick up a torch, and the price you agree to is the price on the invoice. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate on your specific gate, and remember: no trip charge inside the county.
We Also Serve Cities Near Solon
If you’re just outside the Solon line, we cover Twinsburg, Bedford, Bedford Heights, and Macedonia with the same crew and the same stocked trucks. Gate Parts & Welding in Solon is our home turf, but we’re on these roads every week. Call (877) 610-2993 and ask for Hal. He’ll tell you straight when he can be there.
Serving Solon, OH - Our Local Coverage Area
We’re based in the Solon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Solon
Because the hinge post moved. Solon’s clay soil heaves during freeze-thaw cycles, and the post shifts enough over winter that the gate no longer lines up with its latch by spring. The fix is resetting or rebuilding the post footing and re-welding the hinge brackets square, not grinding the latch plate bigger. Call (877) 610-2993 and we’ll inspect the post movement and give you a written price.
Yes, that’s a big part of our Solon workload. Shared rights of way often leave a slide gate with less than a foot of working space behind the post, so we remove the old post in sections, set the new one with a full-depth footing, and weld the rack mount and hinge plate without closing the driveway. We keep the gate working for your neighbors while we do it, and the price is quoted before we dig. Call (877) 610-2993 for a free estimate.
Usually, yes. If the panel’s structure is intact and the sag is coming from worn hinge pins or a corroded bottom rail end, we cut out the bad section and weld in new steel matched to the original profile. A full panel replacement is only the right call when the rail itself is rusted through in multiple places. Most Solon ornamental gates from the 1980s and 1990s are heavy enough to warrant repair, and we’ll tell you honestly which way to go. Call (877) 610-2993 for a free second opinion on any written estimate.
Yes, and it does real damage. Cuyahoga County’s brine mixture corrodes the exposed rack on a slide gate faster than inland counties see, especially on gates within 30 feet of the road. We recommend welded stainless or coated hardware on road-facing installs, and we inspect the rack plate and rollers on every Solon call before we touch the operator. If your gate is jumping teeth or grinding, call (877) 610-2993 and we’ll check the hardware in the driveway.
We do the structural work in phases so the gate never has to stay open or shut for a full business day. We can weld reinforcement plates and replace wheels while the gate stays in service, then schedule the post or rail work for a low-traffic window. For campuses like the ones along Solon’s corporate corridors, we coordinate with your facility manager and keep access running. Call (877) 610-2993 to walk through your site.
When your gate is binding, sagging, or chewing through hardware on a shared driveway in Solon, you need a welder who has seen what this city’s clay and salt do to iron. Call (877) 610-2993 for a free estimate and a straight answer. The person who answers is the person who will stand by the job for 90 days, in writing. We serve Solon from our Cleveland office, and our crews are on these roads every day.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Solon since 2001.