Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Smithtown
If your iron driveway gate in Smithtown sags, binds, or refuses to close after decades of salt air and frost heave, welding repair typically runs $180-$650 depending on the post, hinge, and panel work involved, and we can usually be on site the same day you call. We know the older ornamental gates in this town because we’ve been cutting, welding, and re-hanging them since 2001. A gate that’s been through 40 winters near the Nissequogue River valley doesn’t fail in the middle of the panel. It fails in the post, the hinge, or the operator, and that’s where we start. Call (877) 610-2993 and you’ll talk to a live person, not a menu.
Why Gatewood Fence & Gate Is Smithtown’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice, and that’s the kind of accountability Smithtown homeowners tell us they were missing with the big national outfits. When a 50-year-old ornamental driveway gate near Landing Avenue has a rotted hinge post, you don’t want a stranger guessing over the phone. You want someone who will drive out, look at the weld seam, and tell you if it can be saved or if it’s cheaper to replace the post than chase it with patch welds for the next five years. That’s what our Gate Parts & Welding team does, and we’ve been doing it here long enough to know which neighborhoods have the worst salt-humid air and which subdivisions were built on the sandiest fill.
Every job carries our 90-Day Done Right Promise in writing, not buried in fine print. If it’s not done right, one call brings us back. Calls are answered by a live person 24/7, and the person who shows up is background-checked and uniformed. We’re certified to service FAAC, BFT, Linear, Viking, and five other major gate brands, so when you call us about a Legacy LiftMaster operator that stopped mid-travel, we’re not guessing at the wiring. We also give a free second opinion on any written estimate and knock $40 off any repair over $200. Seniors and veterans get 10% off permanently, no haggling required.
Our Gate Parts & Welding Services in Smithtown
Hinge Replacement
Hinge replacement on Smithtown’s older iron gates is not a bolt-off, bolt-on job. The original hinge pins on 1960s and 1970s ornamental work were frequently welded directly to the post or the panel, and after decades of salt-laden air drifting in from the Sound, the weld itself becomes the weak point. We cut the old hinge free, dress the parent metal, and weld in a new hinge with a heavier barrel and a grease fitting where the design allows. On a typical Smithtown gate, hinge replacement runs $180-$420 per hinge, including on-site welding and re-hanging the leaf true.
Post Replacement
Fix the panel without the post and you’ll fix it twice. That’s the most common lesson we teach Smithtown homeowners, because the town’s sandy, glacially deposited soil heaves every winter and the cast or steel posts that looked straight in October are leaning by April. When a post has rusted through at the base, near the weld seam, or shifted enough that the gate drags, we excavate the old footing, weld in a new Schedule 40 steel post with a reinforced gusset, and re-set it below frost depth. In Smithtown, full post replacement with concrete and re-hanging typically runs $450-$900 per post.
Rail Repair
Rail repair is where welding makes the difference between a gate that lasts and a gate that fails again next season. On Smithtown’s mid-century colonials and split-levels, we see bottom rails that have rusted thin from the inside, top rails bowed from years of kids swinging on them, and intermediate rails cracked at the picket welds. We cut out the bad section and weld in matching steel, then grind and paint the repair so it doesn’t look like a patch. Most rail repairs in Smithtown land between $250 and $550, depending on the length and whether the panel has to come off the posts to do it right.
Custom Welding
Custom welding is the reason we tell Smithtown customers not to scrap a gate they like. We can weld in new pickets to match the original pattern near Nissequogue Road, rebuild a gate frame around the existing ornamental scrollwork, or fabricate a new leaf to match the surviving one. On a split-level property near Landing Avenue, our crew found a 1970s swing gate whose lower hinge post had rotted through at the base, throwing the leaf into the driveway and stripping the rack and pinion on a Legacy LiftMaster operator. We excavated the frost-heaved footing, welded in a new Schedule 40 steel post with a reinforced gusset, re-hung the gate true, and aligned the operator’s limit switches and safety photocell, all while saving the original ironwork the homeowners wanted to keep. Custom welding in Smithtown runs $120-$180 per hour plus materials, and we quote the full job before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Smithtown
We stock repair parts in the truck for the brands Smithtown homeowners actually own, so you’re not waiting a week on a FAAC capacitor or a Viking limit switch to arrive from a warehouse. We’re certified to service FAAC, BFT, Linear, Viking, and five other major gate brands, and we keep commonly needed hinge barrels, gate rollers, latch springs, and safety edge components on hand for same-day repairs across the 11787 zip. If you’ve got an older operator branded DoorKing or Mighty Mule that’s been on the gate since the Clinton administration, we can usually match the board or retrofit a modern replacement without changing the whole system. Call us at (877) 610-2993 and tell us what you’re looking at; we’ll tell you straight if we can bring the part with us.
Common Gate Parts & Welding Problems We See in Smithtown Homes
- Hinge posts rusted through at the weld seam. Smithtown’s proximity to Long Island Sound and the Nissequogue River means salt-laden humidity has been eating at unpainted iron hardware since before most of these gates were installed. The first sign is usually a gate that suddenly sags and twists, because the hinge post gave way at the bottom, not the middle of the panel.
- Obsolete control boards on 1980s and 1990s operators. Suffolk County’s permit requirement was rarely enforced until recently, so many Smithtown homes are still running automatic openers that predate modern safety-reverse standards. These boards fail suddenly, and when they do, the gate usually dies mid-travel with no safe way to manually release it.
- Frost heave throwing swing gates out of alignment. The sandy glacial soil under Smithtown’s post-war subdivisions drains fast, but it also shifts when the ground freezes and thaws. Every spring we get calls from homeowners whose gate was fine in November and dragging on the driveway by March. The fix is almost always re-setting a post that moved, not replacing hinges or the operator arm.
- Worn gate rollers and track on slide gates. Many of Smithtown’s larger parcels use slide gates, and the combination of salt air and abrasive winter road grit wears rollers flat and scores the track. A gate that groans and jerks is usually telling you the rollers are done; ignoring it strains the operator motor until it burns out.
Pricing for Gate Parts & Welding in Smithtown, NY
Here’s what you can expect to pay in Smithtown, and these numbers are stated before we start, never changed at the door. Hinge replacement: $180-$420 per hinge. Post replacement: $450-$900 per post, including excavation, concrete, and re-hanging. Rail repair: $250-$550, depending on the length and whether the panel has to come off. Custom welding: $120-$180 per hour plus materials. Gate rollers and latch or lock repairs: $85-$250. A full 40-year-old ornamental gate rescue, where we weld in a new post or two, replace hinges, and get the operator aligned, can run $800-$1,500, which is still usually far less than a new gate. We give free estimates, charge no trip fee inside the county, and every price is agreed in writing before we pick up a torch. Call (877) 610-2993 and we’ll come measure it.
We Also Serve Cities Near Smithtown
Our Gate Parts & Welding in Smithtown customers are the center of our service area, but we work just as often in neighboring Hauppauge, Kings Park, Saint James, and Lake Ronkonkoma. If you’re in one of those towns and your gate post shifted over the winter, the same crew that works on the older iron gates near the Nissequogue River can be at your driveway too. Same live-person phone answer, same 90-Day Done Right Promise, and same no-trip-charge policy inside the county.
Serving Smithtown, NY - Our Local Coverage Area
We’re based in the Smithtown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Smithtown
Yes, we can weld many corroded posts, but the decision comes down to how much solid steel is left at the base. If the post has rusted through at the weld seam but the surrounding metal is still thick enough to carry the gate, we weld in a reinforcing sleeve or gusset plate and re-hang the gate; that repair runs $250-$450. If the post is rotted around more than half its circumference, replacement is the cheaper answer, because patch-welding thin steel just gives you another failure next year. We’ll show you the post after we excavate it and tell you straight which one applies. Call (877) 610-2993 for a free site look.
Most of these systems were installed in the 1980s and 1990s, before Suffolk County began requiring permits for automatic gate operator installations, and before federal safety-reverse standards existed. That means a lot of Smithtown homes are running operators that will keep pushing against a car bumper or a child’s bike because the installer never put in a photocell or a sensing edge. We can retrofit modern safety devices onto many older FAAC, BFT, and Linear operators without replacing the whole system, and we’ll flag any that can’t be brought up to current safety standards. It’s a liability conversation worth having, not an upsell.
It’s usually the post. Smithtown’s sandy glacial soil heaves with the freeze-thaw cycle, and the post footing shifts a fraction of an inch each winter; by spring the gate is dragging or binding, and people assume the hinges are worn. The test is simple: if the post is plumb and the gate still sags, it’s the hinges; if the post leans even slightly toward the driveway, that lean is where your sag comes from, and replacing hinges won’t fix it. We’ll check the post with a level before we recommend anything. Call (877) 610-2993 and we’ll tell you what you’re actually dealing with.
In almost every case, you can replace the rollers and track without converting the gate, and that’s the cheaper fix. We replace worn rollers, weld in new track sections where the old steel has scored through, and re-align the gate so it glides instead of jerking; that work typically runs $85-$250 for rollers and $300-$600 if the track needs significant welding. Conversion only makes sense if the gate frame itself is failing or the slide path has shifted so badly that the gate will never track true. We’ll tell you which side of that line your gate is on.
If your operator is a brand model that’s been out of production for more than 15 years, and the board has failed, replacement is almost always the better call, because repairing a board with no available parts means waiting on a specialty shop and paying nearly the cost of a new control unit. We can usually tell over the phone from the model number whether your FAAC, BFT, or Linear board can be rebuilt economically or whether it’s time for a modern board with current safety inputs. Either way, the price is agreed before we order anything, not after. Call (877) 610-2993 and read us the model number; we’ll tell you what we’d do if it were our gate.
Ready to Get Your Smithtown Gate Working Again?
Whether it’s a hinge post that rotted through near the Sound, an operator board that took its last breath, or a gate that’s been dragging since the thaw, call us at (877) 610-2993 for a free estimate. We’ll set a time, show up when we say we will, and put the price in writing before anything gets welded or replaced. Hal Gatewood’s name is on the shop and on every invoice, and the 90-Day Done Right Promise is on every job. You can call around the clock and get a live person, or you can drive to the shop and look us in the eye. Either way, you’ll know who you’re dealing with.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Smithtown since 2001.