Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Shively
Most gate problems in Shively start underground, not at the hinge. The clay-heavy soil under the 40216 shifts every winter, posts heave out of plumb, and the gate that worked fine in October is dragging by February. We repair what’s actually failing rather than selling you a new gate you don’t need. Hal Gatewood has been fixing gates since 2001, and the person who answers the phone is the same person who’ll show up in your driveway. Call us at (877) 610-2993 and you’ll get a straight answer about whether your gate is worth repairing, and a written price before any work starts.
Why Gatewood Fence & Gate Is Shively’s Preferred Gate Parts & Welding Company
Shively isn’t just another Louisville neighborhood, and the gate work here proves it. Because Shively is an independent municipality that survived the 2003 merger into Louisville Metro, a gate post reset that needs a permit has to go through Shively City Hall, not Louisville Metro permits. Outside contractors pull the wrong permit and the job gets stopped mid-dig. We keep Shively’s permit path baked into our repair estimates, so you’re not standing in your driveway explaining to a city inspector why the post hole is open and the gate is leaning against the house.
We work on gates that were hung before most of our competitors were in business. Original 1940s chain-link posts, 1980s replacement hinges, obsolete operators with no entrapment protection, we see it all in Shively’s brick ranch neighborhoods off Dixie Highway. Hal’s name is on the shop and on every invoice. He has been at this since 2001, which means he has watched Shively’s post-WWII housing stock age and knows exactly how those gates fail.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call brings Hal back, no runaround. And because our Gate Parts & Welding team welds on site, your gate stays in your driveway. We don’t haul it off to a shop across town and bring it back next week.
Our Gate Parts & Welding Services in Shively
Hinge Replacement
On a narrow Shively lot where the driveway gate swings within inches of the brick, a worn hinge isn’t an inconvenience, it’s a call you’ll make twice if it’s done wrong. We replace hinge pins, weld new hinge brackets onto sound posts, and when the post itself is the problem, we say so. A hinge replacement on a standard chain-link driveway gate in Shively typically runs $120 to $240 per hinge including welding, with the caveat that if the post has heaved, hinge work alone won’t hold. Fix the panel without the post and you’ll fix it twice.
Post Replacement
This is the repair we do more than any other in Shively’s 40216 ZIP. The original posts set in shallow footings before deeper frost-depth standards existed heave 2 to 3 inches out of plumb every freeze-thaw cycle. The gate panel looks straight, but it drags or won’t latch because the post moved. We pull the old post, dig a deeper footing, set a new galvanized post in concrete, and weld the hinge brackets fresh. A typical post replacement in Shively runs $280 to $450 per post depending on depth and access, and we quote it before we start. The city permit for a post reset is part of that estimate, not a surprise add-on later.
Rail Repair
Shively’s original chain-link gates have top and bottom rails that corrode from the inside out. The galvanizing wears off, water sits in the rail, and the gate sags in the middle even though the hinges and posts are fine. We cut out the rotted section, weld in new rail, and re-tension the fabric. Rail repair on a typical 8 to 10 foot Shively driveway gate runs $150 to $300. If the whole frame is gone, replacement is often cheaper than patching, and we’ll tell you that plainly.
Custom Welding
Some Shively gates aren’t worth replacing because you can’t buy them anymore. Odd sizes, gate frames welded to match a 1960s fence line, posts set at angles that only make sense on a lot that’s been there since before Dixie Highway widened. We fabricate hinges, latch brackets, frame extensions, and complete gate frames in your driveway. Custom welding work in Shively is quoted by the job, but typical small fabrications run $80 to $200 for a bracket or latch repair, and a full custom gate frame starts around $450. Hal welds it himself, on site, and it’s right before he puts the truck in gear.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shively
We’re certified to service nine major gate brands, and in Shively we see a lot of older LiftMaster, FAAC, and Linear operators still running on gates that have been through decades of Louisville winters. A 1990s FAAC swing arm on a Dixie Highway ranch is different from a brand-new Linear slide operator on a Pleasure Ridge Park driveway, and we stock the parts for both. We keep common control boards, limit switches, and safety edges on the truck so most Shively repairs are done in one visit. When a board is obsolete and no longer available, we say so and tell you honestly whether retrofitting is worth it.
Common Gate Parts & Welding Problems We See in Shively Homes
- Heaved posts on original 1940s-1960s chain-link gates. Shively’s clay soil expands and contracts through freeze-thaw cycles, pushing shallow footings upward and tearing hinge welds before the gate panel ever bends. The post has to be reset before any hinge work will hold.
- Obsolete control boards on legacy operators. Pre-UL 325 operators lack entrapment protection and weren’t designed for Shively’s ice storms, which add sudden shock loads to old rack and pinion slides. A gate that seizes mid-travel is usually a board or gear failure, not a gate failure.
- Corroded hinge posts cracking at the weld line. On narrow-lot driveways where the gate swings close, corrosion eats the weld where the hinge bracket meets the post. The gate sags even when the panel and hinges look serviceable.
- Sagging gates on property lines that pre-date modern setbacks. Many Shively gates were hung before current fence setback rules, so replacement means a permit conversation with the city. We know that path and include it in the estimate from day one.
Pricing for Gate Parts & Welding in Shively, KY
We Also Serve Cities Near Shively
We work throughout the neighborhoods around Dixie Highway and beyond, including Saint Dennis, Pleasure Ridge Park, Louisville, and Fairdale. If you’re just outside the 40216 and wondering whether we cover your street, call and ask. Our Gate Parts & Welding in Shively team runs jobs throughout Jefferson County every week.
Serving Shively, KY - Our Local Coverage Area
We’re based in the Shively area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Shively
Why do gate posts in Shively heave out of alignment every winter?
Jefferson County’s clay-heavy soils expand when wet and contract when frozen, and Shively’s original gate posts were often set in shallow concrete footings poured before deeper frost-depth standards were adopted. Each freeze-thaw cycle lifts the post a little more, and after enough winters the post is 2 to 3 inches out of plumb. The gate may look fine, but the post has to be reset with a deeper footing before any hinge or latch repair will last. Call (877) 610-2993 and we’ll tell you whether your post is the problem, or whether something simpler is going on.
My 1980s chain-link gate is sagging but the panel looks straight, what’s actually failing?
In nearly every case we see in Shively, the sag is coming from the post, not the panel. A gate sags in the hinge post, not in the middle. Once the post heaves or the hinge bracket corrodes at the weld line, the gate leans even if the panel is structurally straight. We prove it on site by checking the post with a level before we touch the gate. If the panel is straight, we don’t replace it, we fix the post and rehang the gate. Estimates are free at (877) 610-2993.
Is my old LiftMaster or FAAC gate operator from the 1990s still safe to use?
If it pre-dates UL 325 entrapment protection standards, no, and this comes up constantly on Shively’s older homes. Operators from the 1990s lack the safety reversing features and photocells required today, which makes them dangerous around kids, pets, and delivery drivers. We can retrofit many of them with external safety photocells and newer control boards, but when a board is obsolete and unavailable, replacement is the honest answer. We’ll show you the operator, explain what’s missing, and quote both options before we start.
Does Shively really require a separate gate permit from Louisville?
Yes, and this is the one thing that catches outside contractors off guard more than anything else. Shively is an independent city with its own municipal government, so permits go through Shively City Hall, not Louisville Metro. A contractor who pulls a Louisville Metro permit for a Shively post reset can have the job stopped mid-dig, and then you’re the one waiting. We’ve worked with Shively’s permit office long enough to have the path down to a routine part of the estimate. No surprises, no stopped jobs.
Can you repair a slide gate with a broken rack and pinion on a Shively driveway?
Yes, and we do it on site. Broken rack and pinion setups on older slide gates are common in Shively, usually because the gate was never adjusted for the post heave happening underneath it. We remove the damaged rack section, weld in a new one, align the pinion gear to the new track height, and test the full travel before we leave. If the gearbox is also shot, we’ll tell you before we touch anything, with a price in writing. Call (877) 610-2993 and we’ll come take a look.
Contact Gatewood Fence & Gate in Shively
If your gate is dragging, sagging, or refusing to close, call Hal at (877) 610-2993. You’ll get a live person, a straight answer, and a free estimate in writing before any work begins. No trip charge inside the county. A permanent 10% discount for seniors and veterans. And every job stamped with the 90-Day Done Right Promise, so if it’s not right, we make it right. We’re locally owned, owner-operated since 2001, and we answer the phone 24/7. Call today and let’s get your gate working the way it should.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Shively since 2001.