Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sherrelwood
If you’re in Sherrelwood and your gate is sagging, dragging, or coming off its hinges, you want a welder who knows this area’s gates, this area’s weather, and this area’s rules. Gatewood Fence & Gate has been fixing gates since 2001, and we do the work in your driveway, not in some shop across town. Hal Gatewood’s name is on the business; his phone number is answered by a live person any hour of the day or night. Call (877) 610-2993 and tell us what the gate is doing. We’ll tell you what it’s going to take to fix it.
Why Gatewood Fence & Gate Is Sherrelwood’s Preferred Gate Parts & Welding Company
We’ve fixed enough gates in Sherrelwood to know what this neighborhood throws at them. The ranch homes along Pecos Street, the split-levels north of 80th Avenue, the quiet blocks east of Federal Boulevard: most were built when the gate hardware was steel and the concrete was mixed by hand. That means we’re not surprised by a hinge post that’s heaved out of plumb or a barrel hinge that’s rusted clean through. We bring the welder, the replacement steel, and the concrete to the job. You don’t haul the gate anywhere.
Sherrelwood is unincorporated Adams County. That’s not a technicality; it’s the difference between a job that passes code and one that gets red-tagged. Our Gate Parts & Welding crew knows where Adams County fence rules start and where Denver’s end. When a post replacement crosses a setback threshold, we tell you before we dig, not after. That’s the trust you earn from homeowners who’ve already watched another contractor guess wrong.
Every job comes with a written 90-Day Done Right Promise. If the work isn’t done right, one call brings Hal back. No runaround, no voicemail, no “send us photos first.” And when you call our number, a live person answers. Not a chatbot. Not a queue. A person who knows what a gate hinge is.
Our Gate Parts & Welding Services in Sherrelwood
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. Older Sherrelwood gates often have steel barrel hinges that were welded on in the 1960s, and when the weld fails, the whole leaf drops. We cut the old hinge free, weld a new barrel hinge to match the original leaf, and set the gate so it latches clean. If the hinge post itself has moved, we address that first, because a fresh hinge on a crooked post is a repair you’ll pay for twice.
Post Replacement
Post replacement is the most common serious repair we do in Sherrelwood. The original concrete footings from the 1950s crumble, freeze-thaw cycles heave the posts, and a gate that scraped the driveway in February is often a full post out of plumb by March. We dig the old footing, pour a new one sized for the gate’s weight and wind exposure, and reset the post true. If the gate is staying in place while we do it, we shore it properly so the hinges aren’t loaded wrong during the pour.
Rail Repair
Chain-link gates in Sherrelwood often fail at the rail welds, where rust has eaten the steel from the inside out. Sometimes the rail can be cut back and a new section welded in; sometimes the whole gate frame is too far gone to repair honestly. We’ll tell you which one you’ve got. If the rail is repairable, we weld it on site, grind it clean, and you keep your gate. If it’s not, we say so, and we quote you a replacement before any work starts.
Custom Welding
Not every gate part comes off a shelf. When a Sherrelwood homeowner wants a matched hinge, a taller latch plate, or a welded repair to a decorative steel gate that’s been in the family for fifty years, Hal welds it himself. We carry steel stock on the truck for common replacements and can fabricate custom brackets, stops, and mounting plates for older gate designs that no parts catalog covers anymore. The gate stays at your house; the welder comes to it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sherrelwood
We service and retrofit gate openers from Viking, Ghost Controls, DoorKing, Elite, and others, including the older boards and limit switches that national companies won’t touch. If you’ve got a legacy operator on a Sherrelwood driveway gate, we can often repair what’s failing instead of swapping it out. Hal is certified on nine major gate brands, and we stock common replacement parts for the openers most often installed in this part of Adams County. That means less waiting for a parts truck from another state.
Common Gate Parts & Welding Problems We See in Sherrelwood Homes
- Hinge posts heaving out of plumb in spring. The freeze-thaw cycle in Sherrelwood’s open Front Range plain works on concrete footings like a jack. A gate that scraped the driveway all winter is often a post that’s moved a quarter inch out of true. We reset the post and the gate closes right.
- Rusted barrel hinges on 1960s-era steel gates. The weld where the hinge meets the leaf is the first place to fail on a gate that’s been outside for sixty years. We cut, weld, and match the replacement to the original leaf so the repair doesn’t look like a patch.
- Legacy gates without modern safety sensors. Older swing gates in Sherrelwood were hung before UL 325 entrapment standards were common. When we retrofit an operator onto one of these gates, we install photo eyes and edge sensors as part of the job. An opener without them is a liability, and we won’t leave one that way.
- Wind damage from Chinook events. Sherrelwood sits on open ground with little windbreak. Gusts past 60 mph can lift a lightweight gate off its hinges entirely, especially in late winter. We see it every year, and the fix usually starts with a stouter hinge barrel and a post that’s buried deeper than the original.
Pricing for Gate Parts & Welding in Sherrelwood, CO
Hinge replacement in Sherrelwood typically runs $180 to $340 for a standard steel swing gate, including the welded barrel hinge and realignment. Post replacement runs $450 to $900 depending on post depth, footing size, and whether the old concrete needs to be jackhammered out. Rail repair usually lands between $150 and $350 if we can weld a section in place. Custom welding work is quoted by the piece: a matched hinge bracket might run $120 to $200, while a fabricated steel patch for a decorative gate can run $300 to $600.
We give you a written price before the welder starts. Not an estimate range, not a “we’ll see when we get in there” quote. A number. That number is what you pay if we do the job. There’s no trip charge inside Adams County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
One thing about Sherrelwood that saves you money: because the community is unincorporated, gate post replacements that exceed Adams County fence height or setback rules fall under Adams County Building & Development, not Denver 311. Contractors who assume Denver jurisdiction often misquote permit needs and trigger rework on legacy post-footing repairs. We know which jobs need a permit here and which don’t. That knowledge has saved Sherrelwood homeowners hundreds of dollars in corrections.
On a ranch off Pecos Street, we found a 1960s steel swing gate where the hinge barrels had corroded through and the hinge post had heaved out of plumb from decades of freeze-thaw. We reset the post with a new concrete footing, welded replacement barrel hinges to match the original leaf, and realigned the gate so it latched without sag correction twice. That’s the job as it usually goes in Sherrelwood: the gate is old, the post is tired, and the right fix is both, done in one visit.
We Also Serve Cities Near Sherrelwood
Our Gate Parts & Welding in Sherrelwood service area covers the surrounding Adams County communities too. We regularly work in Federal Heights, Welby, Shaw Heights, and Westminster, bringing the same on-site welding, upfront pricing, and 90-Day Done Right Promise to every job. If you’re just over the line, call us anyway. The county line matters for permits; it doesn’t matter for whether we’ll come fix your gate.
Serving Sherrelwood, CO - Our Local Coverage Area
We’re based in the Sherrelwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sherrelwood
For a straightforward post replacement at the same location with no change in height or setback, Adams County typically does not require a permit. You need one if the new post changes the gate’s height, moves it closer to the property line or right-of-way, or if the work involves the driveway approach. We tell you before we dig whether your job crosses that line, and we can pull the Adams County paperwork if it does. Call (877) 610-2993 and we’ll walk you through what your specific gate needs.
The panel usually isn’t the problem. A gate sags in the hinge post, not in the middle. When the post has moved out of plumb from freeze-thaw or a crumbling footing, the leaf drops at the latch end and drags on the driveway even though every weld looks fine. We check the post first, and if it’s out of true, we reset it before touching the hinges. Re-welding a hinge onto a leaning post fixes nothing. To have your gate evaluated, call (877) 610-2993; we’ll tell you what’s actually moving.
Yes, and we do it regularly on Sherrelwood’s older chain-link gates. The catch is safety: a gate hung before modern UL 325 standards won’t have photo eyes or edge sensors, and those have to be added when the opener goes on. We also have to replace the hinges and often the post if they’re original, because a solar opener puts more torque on the hinge line than the old manual hardware was built for. The gate structure comes first. Call (877) 610-2993 for an evaluation and a written retrofit price.
Sherrelwood sits on the open Front Range plain with little tree cover or windbreak, and Chinook wind events can gust past 60 mph. A lightweight steel gate acts like a wing in those winds, and if the hinge barrels are worn or the post is shallow, the whole leaf can lift off. We see it most years in late February and March. The fix is a heavier hinge barrel, a deeper post footing, and a gate that’s actually latched, because an unlatched gate catches the wind and twists. If yours came off this winter, call (877) 610-2993 and we’ll get it hanging again.
That depends on the frame. In Sherrelwood, many chain-link gates from the 1950s and 60s have rusted rails but sound posts and hinges. In that case, we’ll weld a new section of rail in for $150 to $350 and you keep the gate. If the corrosion has spread into the hinges or the corner joints, replacing only the rail is like patching a tire with a nail still in it. We’ll show you the rust, tell you the honest option, and let you decide. Estimates are free; call (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Adams County and Sherrelwood since 2001.