Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sevierville
Gate parts and welding in Sevierville usually means one of three things: a hinge post that’s heaved out of plumb from a hard winter, a gate operator motor that’s been run to death by rental guests cycling it 15 or 20 times a day, or rusted hardware that’s finally given up in the mountain humidity. We fix all three, usually in one visit. If you’re off Wears Valley Road, up toward Pittman Center, or anywhere in the 37862, 37864, or 37876 zip codes, call (877) 610-2993 and you’ll get a live person who knows these hills. Hal Gatewood has been welding and repairing gates since 2001, and his name is on the shop.
Why Gatewood Fence & Gate Is Sevierville’s Preferred Gate Parts & Welding Company
We’re not a national outfit that farms work out to whichever subcontractor picks up the phone. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and license number anyone can look up. When you call, a live person answers. Day or night. No voicemail, no menu tree, no chatbot.
Our Gate Parts & Welding team works on real gates in real Sevierville conditions. That means we know what a freeze-thaw cycle does to a concrete post footing on a sloped cabin lot, and we already have the welder loaded when we pull up. We stock common hinge plates, roller brackets, and latch hardware for the brands most common around here, so we’re not waiting on a parts truck while your gate hangs open.
On-site welding is the difference. We weld it in your driveway instead of hauling the gate off to some shop across the county. Fix the panel without the post and you’ll fix it twice. Hal welds it once, and every job carries the 90-Day Done Right Promise in writing. One call brings him back. No runaround.
Our Gate Parts & Welding Services in Sevierville
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In Sevierville’s cabin-rental corridor, hinge posts take abuse most residential gates never see: constant open/close cycles, heavy panels swinging on sloped ground, and freeze-thaw winters that shift concrete footings a little more each year. We cut out the old hinge, weld in a reinforced plate, and get the gate swinging true again. On a Ghost Controls or Linear swing gate, we match the hinge to the operator’s torque rating so the motor isn’t fighting the panel.
Post Replacement
Concrete post footings heave in this town. The foothills elevation brings freeze-thaw cycles most winters that push footings out of alignment, which twists the post and binds the gate. We break out the old footing, re-set the post with deeper embedment and better drainage, and weld fresh hinge mounts before the concrete cures. If the post is rotten at the base, which we see often on 1990s-era log-frame cabins, we’ll replace the whole post rather than sistering a patch that fails next season.
Rail Repair
Wood gate frames rot fast up here. Fifty-five plus inches of annual rainfall and persistent mountain fog keeps wood damp, and that means rail ends soften and fasteners pull loose. We cut out the rot, weld or bolt in a new rail section, and seal it so water doesn’t sit in the joint. On steel tube gates, which are common on the rental properties around Wears Valley Road, we weld cracks rather than telling you to buy a new gate.
Custom Welding
Sometimes the right fix isn’t a catalog part. We fabricate hinge plates, weld extension brackets, reinforce corners, and build custom latch mounts when the stock part won’t sit right on a sloped driveway. We got called out to a log-frame cabin off Wears Valley Road in 37862 where a Ghost Controls swing gate had sagged so badly the keypad entry wouldn’t trigger the loop detector. Our crew found the hinge post had heaved out of plumb from winter freeze-thaw, so we re-set the post footing, welded a new reinforced hinge plate, and upsized to a commercial operator so it could handle back-to-back guest turnarounds without burning out again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sevierville
We service nine major gate brands, and around Sevierville that usually means Viking, Ghost Controls, Linear, and DoorKing on the rental cabins. We keep common hinge kits, roller brackets, and latch parts on the truck for these brands, so most repairs don’t wait on a parts order. Whether it’s a Viking swing arm that’s blown out or a DoorKing slide gate that’s grinding, we work on the equipment you already have rather than pushing a full replacement. Hal is certified on all nine brands, and he’ll tell you plainly when a motor is worth rebuilding and when it’s not.
Common Gate Parts & Welding Problems We See in Sevierville Homes
- Hinge posts heaved out of plumb. Freeze-thaw cycles in the foothills shift concrete footings a fraction of an inch each winter, and after a few years the gate binds or drags. We re-set the post and weld fresh hinge mounts rather than shimming a misaligned panel.
- Burned-out operator motors on rental properties. A residential-rated LiftMaster or Apollo running 15 to 20 open/close cycles a day during a full booking weekend can fail in under two seasons. We upsize to commercial-duty operators on any active rental gate.
- Rusted steel hardware and rotted wood frames. The area’s 55+ inches of annual rainfall and mountain fog accelerate both. We see hinge straps rusted through and rail ends rotted inside two years on some cabin gates.
- Keypad and loop detector failures tied to gate sag. When a gate panel drops out of alignment, the safety sensor or loop detector won’t trigger, which means the keypad code does nothing. Fixing the hinge post usually fixes the sensor problem too.
Pricing for Gate Parts & Welding in Sevierville, TN
A hinge replacement in Sevierville typically runs $180 to $340 per hinge, including the welded plate and hardware. Post replacement, which involves re-setting the concrete footing, usually lands between $400 and $850 depending on whether we also need to weld new hinge mounts or replace rotted rail sections. Custom welding work is priced by the job: small bracket repairs and crack welds often fall in the $120 to $250 range, while fabrication of a new hinge plate or latch mount can run $200 to $450. The price is quoted and agreed before any work starts, so the number you get on the phone is the number on the invoice. And there’s no trip charge inside the county. Call (877) 610-2993 and we’ll give you an honest range before we ever put the truck in gear. You can also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near Sevierville
Beyond Sevierville, our crews work the surrounding Smoky Mountain communities regularly: Pigeon Forge, Seymour, Jefferson City, and Newport. If you’re in one of those towns and dealing with a sagging gate or a dead operator, Gate Parts & Welding in Sevierville is a short drive away. Same pricing, same 90-Day Done Right Promise.
Serving Sevierville, TN - Our Local Coverage Area
We’re based in the Sevierville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sevierville
Because the concrete footings heave through winter freeze-thaw cycles, and the gates themselves run 15 to 20 open/close cycles a day during peak booking weekends, so a weak post shows itself fast. The combination of sloped lots, heavy panels, and constant use means a hinge post that would last 20 years on a flat suburban lot can fail in five on a steep Smoky Mountain driveway. We re-set and weld posts on rental properties more than any other repair.
On an active rental with back-to-back guest turnarounds, a residential-rated operator often lasts under two seasons. That’s not a defect; it’s simply too many cycles for a motor built for a quiet suburban gate that opens twice a day. We routinely upsized to commercial-duty operators on rental gates, and it’s the standard fix for any property in the 37862 or 37876 zip codes. Call (877) 610-2993 and Hal can tell you whether your current operator is sized for the work it’s doing. Estimates are free.
Sometimes, but not usually. A gate sags in the hinge post, not in the middle, and if the post is heaving out of plumb, welding the panel just transfers the stress somewhere else. We’ll always look at the post first. If the post is structurally sound and only the hinge strap or weld has failed, we’ll weld the hinge and send you on your way. If the post is moving, we’ll tell you straight, because fixing the panel without the post means fixing it twice.
Yes, and it matters on rental properties where guests include kids and older visitors. Any automated gate in Tennessee needs to meet current safety standards for entrapment protection: photo eyes or contact edges that reverse the gate if something is in the way. When we service an operator or replace a hinge, we check that the safety edges and sensors are working, because a misaligned gate panel can knock a photo eye out of alignment without anyone noticing. A gate closing on a child is the worst possible phone call, so we test everything before we leave.
Hinge straps, latch hardware, and operator mounting brackets, in that order. The combination of 55+ inches of annual rainfall and persistent morning fog keeps steel damp for weeks at a time, and the fasteners at the hinge and latch take the worst of it because water sits in those joints. We see hinge straps rusted clean through on gates that look fine from the street. We replace them with galvanized or stainless hardware when we weld, so the next repair is a lot further down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sevierville and the Smoky Mountain communities since 2001.
Call Gatewood Fence & Gate for Gate Parts & Welding in Sevierville
If your gate is sagging, dragging, rusted through, or just quit opening, call (877) 610-2993. You’ll get a live person, not a recording. We’ll give you a straight answer and an upfront price, and if we can fix it, we’ll weld it on site in your driveway. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.