Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Seven Hills
Gate installation in Seven Hills, OH typically runs $180-$475 for hinge and rail repairs, while full post replacement on a sloped lot costs $550-$1,150 depending on footing depth. Most jobs are finished in one visit because we weld on site, in your driveway, not in some shop across town. If your gate sags, drags, or won’t latch, call Hal at (877) 610-2993 and you’ll get a person, not a phone tree.
Seven Hills isn’t flat. It’s rolling and steep in places, and that changes how gates fail. A gate that worked fine in Parma for years will lean, bind, or crack at the weld here because the ground moves differently on a grade. We’ve been fixing those specific failures since 2001, and we stock the parts to do it without making you wait a week.
Why Gatewood Fence & Gate Is Seven Hills’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. He’s the person who shows up, and if something isn’t right, he’s the person who comes back. That’s not a corporate promise, it’s how a one-man shop with a published address has to operate. Seven Hills homeowners call us because they want to look the person fixing their gate in the eye, and that’s exactly what we offer.
We serve Seven Hills with gate access control expertise and background-checked, uniformed crew members who know the difference between a hinge post that needs shimming and one that needs a new footing. Response time to most Seven Hills neighborhoods is same-day for urgent repairs, and a live person answers the phone 24 hours a day. No voicemail, no dispatch queue, no “press 2 for service.”
Our Gate Parts & Welding team has seen what lake-effect snow and Cuyahoga County road salt do to steel. We carry heavy-gauge replacement hinges, weld-on tabs, rail stock, and custom-fabricated brackets in the truck, which is why we can usually fix the gate on the first trip instead of quoting you and leaving.
Every job carries the 90-Day Done Right Promise, written on the invoice in plain language. If the weld cracks or the new post settles, one call brings us back. No runaround, no “well, that’s not covered.” We stand behind the work because Hal’s reputation in Seven Hills depends on it.
Our Gate Parts & Welding Services in Seven Hills
Hinge Replacement
Hinge replacement in Seven Hills usually means fixing what a rust-jacked barrel did to the post. Salt and humidity seize the pin, the barrel swells, and the gate starts tearing the lag bolts out of the post. We cut the old hinges off, plate or weld the post where needed, and mount new greaseable barrel hinges rated for the gate’s weight. On sloped driveways, the hinge has to be raked to match the grade, or the gate will never swing true. Most hinge replacements run $180-$340.
Post Replacement
This is the big one in Seven Hills, because the freeze-thaw cycle goes deeper than 36 inches and frost heave shoves posts out of square every few winters. A gate sags in the hinge post, not in the middle, and that’s where we start. We dig out the old footing, set a new post in concrete below the frost line, and re-hang the gate so it clears the ground on a slope. Typical post replacement runs $550-$1,150 depending on how deep we have to go and whether the panel needs repair. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Rail welds crack when a gate is forced against a misaligned post, and on a graded driveway in Seven Hills, that force shows up every time the gate swings downhill. We grind out the old weld, straighten or re-notch the rail, and lay new weld on site. The gate stays in your driveway, not hauled to a shop. Most rail repairs run $150-$275 per joint, welded and ready to swing same-day.
Custom Welding
Custom welding is where we do the work national repair outfits won’t touch. Stepped gates, raked frames, heavy farm gates on pipe posts, ornamental wrought iron with broken scrollwork. We cut, bend, and weld on site, matching the original steel profile so the repair doesn’t look like a patch. Custom welding in Seven Hills runs $95-$150 per hour plus material, with a written estimate before we strike an arc. The price you agree to is the price you pay, and that’s stated before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Seven Hills
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. If your gate has a nameplate on it, we can likely source or fabricate the part to fix it. We keep common weld-on brackets, hinge barrels, and rail stock on the truck for Seven Hills calls, which means many repairs don’t require a follow-up trip. For older gates with obsolete hardware, we machine or weld a replacement that fits, instead of telling you to replace the whole gate.
Common Gate Parts & Welding Problems We See in Seven Hills Homes
- Downhill post lean and sinking. On sloped driveways, the downhill post carries the gate’s full weight while the ground beneath it gets saturated and heaves in the freeze cycle. By spring, that post is leaning or sunk an inch or more, and the gate starts dragging or binding at the latch point. We set the new post below the 36-inch frost line and angle the concrete footing to resist the slope.
- Rust-jacked hinge barrels and seized pins. Decades of Northeast Ohio road salt and humidity work into the hinge barrel, swelling it until the pin seizes and the gate tears the screws out of the post. This is the single most common failure on the original wrought-iron and chain-link gates still hanging from the 1950s and 1960s in this city.
- Cracked rail welds on graded driveways. When a gate is forced downhill against a post that’s already leaning, the rail weld takes the twist and cracks. A weld pop sounds like a sharp crack and then the gate sags an inch in a week. We grind, realign, and re-weld on site, and we check the post before welding, because welding a rail to a leaning post wastes your money.
- Original hardware heavily corroded from decades of road salt. Many Seven Hills homes still have their original ornamental iron gates, built strong but now 50 to 70 years old. The steel is usually salvageable, but the hinge pins, lags, and latches are not. We replace the wearing parts and preserve the gate, because a 1960s wrought-iron gate has a character a new aluminum panel never will.
Pricing for Gate Parts & Welding in Seven Hills, OH
Here’s what we actually charge in Seven Hills, stated plainly. Hinge replacement runs $180-$340 per hinge, depending on weight and whether the post needs plating. Rail repair runs $150-$275 per weld joint. Custom welding runs $95-$150 per hour plus material. Full post replacement runs $550-$1,150 because the footing has to go below the 36-inch frost line, and on a sloped driveway that often means more concrete than a flat lot would need.
We quote the price before any work starts, and the price doesn’t change at the door. No trip charge inside the county. Seniors and veterans always get 10% off, and any repair over $200 takes $40 off. Call (877) 610-2993 for a free estimate, or bring a written estimate from any other company and we’ll give you a free second opinion. Hal will tell you what actually needs fixing and what doesn’t.
We Also Serve Cities Near Seven Hills
Gatewood Fence & Gate serves Seven Hills plus Independence, Parma, Parma Heights, and Garfield Heights. Our Gate Parts & Welding crew regularly works in these neighboring communities, and the same 90-Day Done Right Promise applies no matter which side of the county line you live on. If you’re just over the border in Parma or up the road in Independence, call the same number and you’ll get the same person answering.
Serving Seven Hills, OH - Our Local Coverage Area
We’re based in the Seven Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Seven Hills
Gate posts on Seven Hills slopes lean downhill because water drains toward the lower side of the lot, saturating the soil around the downhill post, and then deep frost heave (deeper than 36 inches in Cuyahoga County) lifts and shifts the footing. The gate’s weight pulls it downslope, and the post follows. The fix is a deeper footing with a wider bell bottom set below the frost line, plus proper drainage away from the base. Call (877) 610-2993 for a free evaluation of exactly where your post is failing.
Usually no. A gate sags in the hinge post, not in the middle, and welding the panel without addressing the post means you’ll pay to weld it again next year. If the post is still plumb and the wood or steel around the hinge is sound, we’ll repair just the weld and re-hang the gate. But if the post has moved even half an inch, welding the panel is a temporary patch. We’ll show you the post lean with a level before we recommend anything, and the estimate is free.
For a wide farm gate or heavy driveway gate on sloped Seven Hills ground, we use greaseable, adjustable barrel hinges rated for the gate’s full loaded weight, mounted to a post that’s set below the frost line and raked to match the grade. Ball-bearing hinges with a full-weld barrel work best for steel farm gates over 12 feet wide. We stock them in the truck, and most replacements are done in one trip. Call (877) 610-2993 and tell us the gate width and we’ll bring the right hardware.
Yes, solar gate motors and openers in Seven Hills work on properties where running mains power to the gate is impractical or expensive. Long rural driveways in this city often mean the gate is 200 feet or more from the house panel, and solar with battery backup is a practical option. The catch is Ohio winters, where short gray days reduce solar input, so we size the battery bank and panel for the worst month, not the best. We can walk you through the math for your specific site and give you a written price.
Deep frost heave is hard on rack and pinion slide gates because the ground under the track lifts unevenly, binding the rack against the pinion gear. A gate that slid smoothly in October might stall in February, and forcing it strips teeth off the rack. The fix is a properly compacted, frost-protected track base, and occasionally re-shimming the rack to match settled ground. Our crew welds and shims racks on site in Seven Hills, typically for $150-$300, and we’ll check the track bed while we’re under the gate.
If you’ve got a gate that leans, drags, won’t latch, or has a crack in the weld, call Gatewood Fence & Gate at (877) 610-2993. We’ll come out to Seven Hills, look at what’s actually failing, and give you a straight answer and a written price before any work begins. Hal Gatewood has been doing this since 2001, and the name on the shop is the same name on the estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Seven Hills and surrounding communities since 2001.