Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sellersburg
Gate repair in Sellersburg usually comes down to two things: the parts are worn out, or the post has moved. The Ohio River valley freezes and thaws all winter, and Clark County clay heaves. That’s why most “broken gate” calls we run in the 47172 area are actually post problems wearing a hinge or latch disguise. We stock the parts locally, we weld on site, and we answer the phone live at (877) 610-2993. If the gate is down and you need us, we’ll be there.
Key takeaways for Sellersburg homeowners:
- Post replacement and hinge work are the two most common repairs in this area, not fancy operator swaps.
- We weld on site. Your gate stays in your driveway. The job is done right where it hangs.
- Every repair carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on it.
- Upfront pricing, quoted and agreed before any work starts. Free estimates in Sellersburg.
Why Gatewood Fence & Gate Is Sellersburg’s Preferred Gate Parts & Welding Company
We are a local, owner-operated crew. Hal Gatewood founded the company in 2001, and he still runs the work. Not a franchise, not a national outfit running ads in the Louisville metro and then routing a sub after the call. When you call, a live person answers. At three in the morning, a live person answers. That matters when a gate is stuck half open and your dog has figured it out.
Sellersburg sits right where the Louisville sprawl meets Clark County farm country. That means we see two very different kinds of gates in one service area. A 2002 vinyl privacy gate off Hwy 311 needs something different from a steel tube farm gate on a county road back of Silver Creek. Our crew has worked both since before some of the subdivision streets were paved. Hal’s published address and license number mean you can look us up before we ever step foot on the property. Your neighbor has likely already had us out, and that neighbor will tell you if we did right.
For Gate Parts & Welding work anywhere in the county, the same standard applies: diagnose the actual failure, fix what failed, weld what can be welded, and do not swap parts that are still good. We do not sell replacement gates as a reflex. We sell the repair that stays repaired.
Our Gate Parts & Welding Services in Sellersburg
Hinge Replacement
A gate sags at the hinge post, not in the middle. In Sellersburg, that hinge post is likely set in clay that froze and heaved, so we inspect the post while we replace the hinge. We stock heavy-duty weld-on and bolt-on hinges for wood, vinyl, and steel gates. If the old hinge was the cheap builder-grade barrel hinge that came with the house in 2003, we replace it with something that will outlast the gate panel.
Post Replacement
If the post is out of plumb, a new hinge only buys you a season. We remove the old post, auger past the frost line, set a proper concrete footing, and weld or bolt in a new steel post. On that Hwy 311 tract home, we found a hinge post heaved two inches out of plumb because the original builder never set a footing below the frost line. We replaced it, poured properly, and re-hung the gate with new hardware. That gate is still square four winters later. This is the single most common repair we make in 47172, and it is the one that actually lasts.
Rail Repair
Wood privacy gates fail at the rails, especially the bottom rail, where moisture sits and the gate’s weight works a splice loose. Vinyl gates crack rails at the hardware. We repair rails by disassembling the damaged section and welding or reinforcing the steel core, or by replacing the rail cleanly so the gate keeps its original look. If the frame is salvageable, we salvage it.
Custom Welding
Not every gate in Sellersburg is a privacy panel from a tract home. Plenty of older rural properties run tube-steel swing gates, cattle-panel setups, and custom ornamental work that was never a stock item in the first place. We weld on site, fabricate brackets and braces to fit the existing gate, and repair what a parts catalog cannot supply. That is the whole point of having a welder on the truck. The gate never has to leave your driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sellersburg
We repair and retrofit gate operators from Viking, Ghost Controls, DoorKing, and Elite, among the major brands we’re certified on. The issue on older Sellersburg homes is often an obsolete control board the manufacturer stopped supporting years ago. We keep common boards and parts stocked for these older units, and when the stock board is gone, we have retrofit options that work with the arms and motors you already have. You should know the difference between “this board is no longer made” and “this operator is dead.” We will tell you straight, and the quote is in writing before we touch anything.
Common Gate Parts & Welding Problems We See in Sellersburg Homes
- Clay frost heave shifting hinge posts. Sellersburg sits on Clark County clay that swells and heaves every winter. Posts set shallow in the early 2000s builder rush move out of plumb by February, and the latch stops catching. The fix is a deeper footing, not a longer latch bolt.
- Ice storm damage to hinges and wooden stiles. Freezing rain from the Ohio River valley seizes metal hinges and cracks the wood around the hinge screws. A hinge that worked in October can split the stile by January. We see it every winter, usually on the north-facing gates that never get sun.
- Aging 1990s and early 2000s privacy gates. Builder-grade vinyl and wood packages from the Louisville spillover boom are now 15 to 25 years old. The hardware was cheap, the posts were shallow, and the operators were basic. They fail in sequence: post, hinge, rail, board.
- Obsolete operator boards on older LiftMaster and Viking units. Many local gates run boards the manufacturers stopped stocking years ago. When we find one, we can usually retrofit a modern control board with safety photocells onto the existing arm and motor. That retrofit brings the gate up to current safety codes without replacing the whole system.
Pricing for Gate Parts & Welding in Sellersburg, IN
Here are the ranges we quote in the 47172 market, agreed before work starts:
- Hinge replacement (single gate, heavy-duty hardware): $140-$260
- Post replacement with concrete footing (standard steel post): $380-$650
- Rail repair on wood privacy gate (material and labor): $180-$360
- Custom welding (bracket, brace, or crack repair): $120-$450 depending on the work
- Full gate operator retrofit with safety sensors: $750-$1,400
What moves the number is access, gate weight, and how much of the original hardware we can save. We don’t change the quote at the door. You get the price, you agree to it, and then we start. Standing offers apply to Sellersburg jobs: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. We will quote it, in writing, before any work happens.
We Also Serve Cities Near Sellersburg
In addition to our Gate Parts & Welding in Sellersburg coverage, our crew takes calls across the southern Clark County and Floyd County line: Jeffersonville, Clarksville, Oak Park, and New Albany. The same live phone, the same on-site welding truck, the same 90-Day Done Right Promise. If you’re just across the county line, we’ll roll just the same.
Serving Sellersburg, IN - Our Local Coverage Area
We’re based in the Sellersburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sellersburg
The clay soil under Sellersburg freezes and heaves during the winter, and if your gate post was not set below the frost line, it moves a little every season. A gate that latched fine in September is binding by February. The lasting fix is pulling the post and setting a new footing below the frost line. Smaller adjustments never hold in this soil. Call (877) 610-2993 and we can look at whether your post is the culprit.
Yes, in most cases. We fit modern control boards with safety photocells and edge sensors to existing arms and motors, including older LiftMaster, Viking, and DoorKing units with boards that are no longer produced. The retrofit meets current safety requirements without replacing the whole operator. We’ll tell you plainly if the old motor is too far gone to save.
Grinding on a sliding gate is almost always a roller problem: worn bearings, a seized roller, or a track that has shifted out of level from frost heave. We replace rollers and realign the track before the motor burns out fighting the drag. Call us and we’ll get out to your property before it locks up entirely.
We do. Sellersburg still has working farm properties mixed in with the subdivisions, and we weld steel tube gates, cattle-panel setups, and utility gates that the parts catalogs do not cover. On-site welding means the repair is built to fit the gate you have, not whatever a parts house wants to sell you.
If the gate stiles are rotted, the rails are splitting in multiple places, and the frame has twisted out of square, a new gate panel is usually the cheaper answer. Continual repairs on a frame that is already shot costs more within two years. We’ll show you the condition and give our honest recommendation.
Call Gatewood Fence & Gate for Gate Parts & Welding in Sellersburg
If your gate is sagging, grinding, or not latching, call us. A live person answers, day or night, at (877) 610-2993. Hal Gatewood’s name is on the shop, the shop is in the service area, and our crew knows Sellersburg soil and Sellersburg gates. We’ll give you a free estimate, a written price before work begins, and a 90-Day Done Right Promise on every job. The name is on the invoice, and the phone rings to a person.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sellersburg since 2001.