Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Scottdale
Gate parts and welding in Scottdale usually means one of two things: a chain-link gate that has been sagging since the last time DeKalb’s red clay heaved, or a new ornamental iron gate that needs a post set deep enough to stay true. Either way, we show up, fix it in your driveway, and stand behind it for 90 days. Hal Gatewood has been welding and repairing gates since 2001, and the same person who answers your call is the one who will likely be at your property. If your hinge post is leaning or a weld has cracked, call (877) 610-2993 and tell us what you’re seeing.
We know Scottdale’s stock. Mid-century ranches off McAfee Road, rental properties with original chain-link perimeter fencing, and a growing number of renovated homes where buyers are putting in ornamental iron and automated driveway gates. That mix means we’re replacing shallow footings on one street and fabricating custom hinges on the next. This page is our Gate Parts & Welding team’s rundown of what that work looks like in Scottdale specifically: the permits, the soil, the gate brands, and what it costs.
Key Takeaways
- Scottdale sits in unincorporated DeKalb County, so structural gate post replacements and automated opener permits go through the county, not a city hall.
- DeKalb’s red clay expands and shrinks with rain and dry spells, which is the main reason gate posts in Scottdale lean and gate frames bind.
- We weld on site. The gate stays in your driveway while we fix it.
- Every job carries a written 90-Day Done Right Promise. One call brings us back if something isn’t right.
- Free estimates, no trip charge inside the county, and $40 off any repair over $200.
Why Gatewood Fence & Gate Is Scottdale’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and he has been at this since 2001. That matters in a place like Scottdale, where a lot of the work we see is failed work from somebody else. A gate sags in the hinge post, not in the middle, and that is where we start. We don’t start by telling you the whole gate needs to be hauled off and replaced. We look at the post, the hinges, the frame, and the welds, and we fix what’s actually broken.
Our customers in Scottdale tend to be people who have already been burned once: a cheap repair that lasted a season, a crew that never came back, an opener that worked for two weeks. So we write the warranty on the invoice and we mean it. The 90-Day Done Right Promise isn’t buried in fine print. If it’s not done right, we make it right. That’s the whole deal. And when you call (877) 610-2993, a live person answers. Not a voicemail, not a chatbot, not a call center three states away. Hal or one of his crew.
Serving Scottdale means knowing its dual market. The original chain-link gates on 1940s and 1950s homes are aging out fast. The renovated properties near the Decatur line are going the other direction: custom ornamental iron, heavier panels, automated openers. We handle both ends of that spectrum, and we’ve seen enough of both to tell you honestly what your gate needs and what it doesn’t.
Our Gate Parts & Welding Services in Scottdale
We work on gate parts and welding every day across Scottdale, and the four services below cover most of what we see. Each one starts the same way: a look at the actual gate, an honest answer, and a price agreed before any work starts. That price does not change when the work is done.
Hinge Replacement
Hinges on Scottdale’s older chain-link and tubular steel gates rust fast in the humid summers. The hinge pins seize, the gate binds, and the latch side stops lining up. We replace hinges with heavier-gauge hardware than what usually came on the original gate, and we re-hang the gate so the swing arc stays level. On ornamental iron gates, we often weld on new barrel hinges and re-grease them so the gate swings without groaning.
Post Replacement
This is the one we see most in Scottdale. The original hinge posts on mid-century properties were set in shallow footings, and decades of DeKalb red-clay movement have pushed them out of plumb. When a post tilts, the gate racks, the latch misses, and no amount of hinge adjustment will fix it. We pull the old post, auger a new footing, set a heavier post, and weld or bolt the existing gate back on. If the post is the problem, fix the post. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Top and bottom rails on chain-link gates take a beating from kids, lawn mowers, and the general weight of a gate that has started to sag. We straighten bent rails when we can, splice and weld when we can’t, and add mid-rail braces on wider gates. On ornamental gates, cracked rails at the weld joints are a common failure we repair by grinding out the old weld and re-welding the joint with proper penetration.
Custom Welding
Scottdale’s renovation wave has brought a lot of custom ornamental iron work into the area. Homeowners want a gate that matches the existing fence, or a driveway gate with a specific arch or finial detail. We fabricate on site when possible: cutting, fitting, and welding so the new work matches the old. If you’re replacing a chain-link gate with ornamental iron, we can weld a frame that takes the same hinges and latch geometry, which saves you from redoing the posts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Scottdale
We service and stock parts for the gate openers and hardware most common in Scottdale, including FAAC, BFT, Linear, and Viking. If your opener is a different brand, tell us when you call; we’re certified on nine major gate brands and we keep common parts on the truck. For Scottdale customers, that usually means we can replace a limit switch, hinge, or safety edge in one trip instead of ordering something and coming back next week. We’d rather carry the part than make you wait.
Common Gate Parts & Welding Problems We See in Scottdale Homes
- Heaved hinge posts. DeKalb’s red clay swells in summer downpours and shrinks in dry stretches, and shallow-set posts lean a little more each year until the gate binds on the latch side. We reset them below the frost line and weld gusseted brackets where the post meets the rail.
- Rust-seized hinges and rollers. The humid subtropical summers here accelerate rust on older tubular steel and chain-link hardware. Hinge pins seize, rollers pit, and the gate starts dragging instead of swinging. We replace hardware with coated or stainless components when it makes sense.
- Opener mismatches on renovated lots. When a buyer swaps a light chain-link gate for a heavy ornamental one, the existing opener is often wired for a much lighter panel. The result is phantom stops and burnouts. We replace or reprogram openers to match the new gate’s weight and travel.
- Misaligned safety photocells. On automated driveway gates around Scottdale, a photocell that has drifted out of alignment can cause the gate to stop halfway and reverse. It’s a five-minute fix if you know what you’re looking at, and it’s one of the first things we check.
Pricing for Gate Parts & Welding in Scottdale, GA
A typical hinge replacement on a chain-link or tubular steel gate in Scottdale runs $160 to $320, depending on hinge count and whether we need to re-level the gate. Post replacement, including pulling the old post, augering a new footing, and setting a new post, typically runs $380 to $750 per post in this area, more if the post is welded into an ornamental assembly. Rail repair and straightening usually falls between $120 and $280. Custom welding work is quoted by the job: a simple gate frame repair might run $200 to $400, while a full custom ornamental gate can run $1,500 and up depending on size and detailing. The price we quote is the price you pay, and we agree on it before any work starts. Call (877) 610-2993 for a free estimate on your specific gate.
We Also Serve Cities Near Scottdale
Our gate parts and welding work in Scottdale puts us close to Clarkston, Decatur, Belvedere Park, and Candler-McAfee, and we’re glad to come out to any of those communities. If you’re on the border of Scottdale and one of these areas, the trip charge is the same: none, as long as you’re inside the county. You can also read more about how we serve the wider area on our Scottdale page.
Serving Scottdale, GA - Our Local Coverage Area
We’re based in the Scottdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Scottdale
Yes, in most cases. Because Scottdale is unincorporated, structural gate post replacements and automated opener work fall under DeKalb County’s permitting office, not any city hall. When we do a post replacement on your property, we handle the permit requirements and paperwork so you don’t get caught with a stop-work order mid-project. Call (877) 610-2993 and we’ll tell you exactly what applies to your gate.
The red clay under your post is the culprit. Summer downpours swell the soil, and the post shifts, which racks the gate frame and makes it bind against the latch side. It gets worse with older posts set shallow, and it’s not going to fix itself. We reset the post below the frost line and re-hang the gate. Estimates are free, and we’ll tell you honestly whether a full post replacement is needed or just a re-alignment.
Yes. We fabricate custom ornamental gates on site when we can, matching the picket profile, rail height, and finish of your existing iron fence. If the fence is older and faded, we can match the patina closely or do a full refinish so the new gate doesn’t stand out. Call for a free measure and written price before any work starts.
The most common cause is a misaligned safety photocell or a loop detector that is wired for a lighter gate than what’s actually hanging. We check the photocell alignment, the travel limits, and the opener’s force settings, and we adjust or replace what’s needed. Most of these are one-trip fixes. Call (877) 610-2993 and describe what the gate is doing; we’ll tell you what it likely is before we even come out.
Usually, just the hinges and a re-hang. A chain-link gate sags because the hinge post has moved or the hinges have worn, not because the gate panel itself is shot. We’ll replace the hinges, reset the post if it has leaned, and re-hang the gate so it latches clean. You only need a new gate if the frame itself is rusted through or bent beyond repair. We’ll tell you which one you have, and the estimate is free.
If your gate is binding, leaning, or cracked at the welds, don’t wait until it won’t close at all. Call (877) 610-2993 and talk to a real person who knows gates. We serve all of Scottdale, from the older ranches off McAfee Road to the newer ornamental installs closer to the Decatur line. Free estimates, no trip charge inside the county, and every job backed by the 90-Day Done Right Promise. Show me the gate closing on its own and I’ll show you where it’s failing. Let’s fix it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Scottdale and the surrounding DeKalb County area since 2001.