Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across San Juan Capistrano
Gate parts and welding in San Juan Capistrano means dealing with two very different gates on the same day: a 14-foot ranch gate off Peppertree Bend that has to clear a horse trailer, and a Spanish Colonial ornamental iron gate near the Los Rios Historic District that has to pass architectural review. We handle both. Hal Gatewood has been welding and rebuilding gates since 2001, and our crew works San Juan Capistrano weekly. If your hinge post is leaning, your latch won’t catch, or a weld has cracked through, call (877) 610-2993 and a live person answers. Not a voicemail. Not a call center.
Key Takeaways:
- On-site welding means your gate stays in your driveway, not hauled to some shop
- Most hinge and post replacements in San Juan Capistrano run $240-$680 depending on post size and footing work
- Salt air here corrodes gate hardware 2-3x faster than in Ladera Ranch or Mission Viejo
- Every job carries our 90-Day Done Right Promise in writing
- Calls answered by a live person, 24/7
Why Gatewood Fence & Gate Is San Juan Capistrano’s Preferred Gate Parts & Welding Company
We’re not a franchise. Hal Gatewood’s name is on the shop, his address is published, and his cell number gets handed to every San Juan Capistrano customer before we leave the property. That’s the oldest accountability there is. When we weld a hinge back onto a gate frame in Covenant Hills, or re-plumb a sagging post on an equestrian property in 92675, we know we’ll see that gate again if it isn’t right. So we do it right the first time.
The Gate Parts & Welding work we do in San Juan Capistrano gets fixed the way Hal would fix his own gate. We don’t swap parts that don’t need swapping. We don’t quote a repair that should be a replacement, or a replacement that should be a repair. And we put the 90-Day Done Right Promise on the invoice, in writing: if it’s not done right, we come back and make it right. One call brings us back. No runaround.
San Juan Capistrano customers call us because we carry heavy-gauge hinges, powder-coated steel posts, slide gate rollers, and latch hardware on the truck. Most jobs get done in one visit. There’s no trip charge inside the county, and every repair over $200 gets $40 off without haggling. Seniors and veterans get 10% off, permanently.
Our Gate Parts & Welding Services in San Juan Capistrano
Hinge Replacement
Hinges are where salt air hits first in San Juan Capistrano. The marine layer that rolls through the valley from Dana Point carries enough salt to eat through zinc plating in five to seven years, and once the plating fails, the steel underneath rusts fast. We replace hinges with heavy-gauge stainless or powder-coated steel, and we weld them on site. A typical hinge replacement here runs $180-$420 for a pair, depending on gate weight and whether the post needs reinforcement.
Post Replacement
San Juan Capistrano’s expansive clay soil shrinks and swells with every rain cycle. Posts set shallow start leaning, and gates drop out of alignment. We dig below the clay line, set a new powder-coated steel post in a concrete footing, and weld the gate back on plumb. Post replacement on a standard walk gate runs $350-$680. On a big equestrian swing gate with a concrete-filled pipe post, plan for $700-$1,400 and a half day of work.
Rail Repair
When a horizontal rail cracks or rusts through on an ornamental gate near the Mission district, you often can’t just patch it. The city’s Spanish Colonial design review matters, and the repair has to look right. We cut out the failed section, weld in matching steel, grind the joint smooth, and finish it to match the surrounding frame. Rail repairs run $220-$500 per rail depending on length and finish matching.
Custom Welding
We weld on site, which matters in San Juan Capistrano because few local shops will take a 14-foot ranch gate off its hinges, haul it to a shop, and bring it back. We bring the welder to the gate. That includes custom hinge fabrication, latch bracket repair, post cap replacement, and ornamental ironwork that has to match period styling near the historic core. Custom welding runs $95-$150 per hour plus materials, and Hal will look at the job first and tell you exactly what it’ll cost before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Juan Capistrano
We service and carry parts for the major operator brands you’ll find on San Juan Capistrano gates: FAAC, BFT, and Linear swing and slide operators are the ones we see most often on hillside tract homes in Covenant Hills and on equestrian estate gates in 92675. Viking operators show up on a fair number of older ranch properties. We stock common boards, remotes, photocells, and limit switches on the truck so we’re not driving back and forth to a supply house. If your operator is down and the gate won’t budge, call us at (877) 610-2993.
Common Gate Parts & Welding Problems We See in San Juan Capistrano Homes
- Galvanic corrosion at the hinge-to-frame interface. Powder-coated steel hinges bolted onto wrought-iron frames create a corrosion cell when marine-layer moisture sits in the joint. The interface rusts and seizes within five to seven years, often before the rest of the gate shows visible wear.
- Sagging hinge posts on clay soil. Winter rain swells the clay, summer drought shrinks it, and the post footing shifts a little more each cycle. Big equestrian swing gates off Peppertree Bend and Ortega Highway see this every year. The latch stops catching, the gate scrapes the ground, and the fix is a re-set post, not a new gate.
- Worn slide gate rollers and rack teeth. Salt grit gets into the track, and Santa Ana winds push wide gates against their rollers. We see chewed-up nylon rollers and stripped rack-and-pinion teeth on slide gates throughout San Juan Capistrano’s ranch and hillside properties.
- Photocell and limit switch failures after wind events. Santa Ana gusts flex wide gates and move posts just enough to throw beam alignment off. Your gate starts beeping, reversing, or refusing to close. Most of the time it’s a realignment and a new bracket, not a new operator.
Pricing for Gate Parts & Welding in San Juan Capistrano, CA
Here’s what we quote in San Juan Capistrano, and what you can expect to pay a competent local welder for honest work. Hinge replacement: $180-$420 a pair for standard swing gates, more for ornamental iron with period hardware near the Mission. Post replacement: $350-$680 for walk gates, $700-$1,400 for pipe posts on equestrian gates. Rail repair: $220-$500 per rail. Custom welding: $95-$150 an hour plus steel. Slide gate roller and track repair: $280-$600. The price is agreed in writing before any torch gets lit or any grinder gets plugged in. No surprise invoice at the door. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near San Juan Capistrano
Our crews work Dana Point, Laguna Niguel, Ladera Ranch, and San Clemente every week, but this page is about Gate Parts & Welding in San Juan Capistrano specifically, because the gates here are different. Equestrian scale, historic review, salt air, and clay soil all in one ZIP code. We know these gates.
Serving San Juan Capistrano, CA - Our Local Coverage Area
We’re based in the San Juan Capistrano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in San Juan Capistrano
San Juan Capistrano sits five to seven miles inland through a coastal valley, so the marine layer rolls in each morning and lingers on valley-floor properties. That salt-laden moisture sits longer on large exposed ranch gates than it does on tighter coastal canyon lots, and it works into the hinge-to-frame interface. The fix is stainless or powder-coated heavy-gauge hinges and stainless fasteners, not the plated hardware most installers use. Call (877) 610-2993 and we’ll spec the right hinge for your gate.
If it sags every winter and straightens up in summer, your post is moving in expansive clay. Hinge adjustment will buy you a few months, but the post footing has shifted, and it will keep shifting. The lasting fix is digging below the clay line, re-setting the post in a proper concrete footing, and re-welding the hinges. We do this regularly on equestrian properties in 92675. A free look costs you nothing: call (877) 610-2993.
Yes. We’ve matched period ironwork for properties near the Los Rios Historic District and the Mission, including custom scrollwork, spear-tip pickets, and the heavier masonry pilaster mounts that older adobe and Spanish Colonial Revival homes require. We weld on site, finish to match the existing patina, and coordinate the design to pass architectural review. Schedule a free measure at (877) 610-2993.
Use hot-dipped galvanized or powder-coated steel from the start, stainless fasteners at every joint, and a zinc-rich primer on any field weld before topcoat. Do not bolt plated hardware to bare steel. Do not skip the primer on welds. On horse properties we also set posts below the clay line so shifting soil doesn’t crack the coating and expose bare steel. Want us to spec it? Call (877) 610-2993.
Santa Ana winds push wide gates sideways against their tracks and posts, which moves the beam alignment just enough for the photocells to read an obstruction that isn’t there. Most of the time the fix is re-aligning the beams and tightening the track brackets, plus checking the gate wheels for salt grit wear. It’s a one-visit repair for us. Call (877) 610-2993 and we’ll get it sorted.
Call Gatewood Fence & Gate in San Juan Capistrano
If your gate is sagging, your hinges are rusting, or a weld has cracked, call (877) 610-2993. A live person answers, day or night. Hal will look at the gate, tell you what it needs, and give you a written price before any work starts. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. And the 90-Day Done Right Promise on every single job. That’s how we do it in San Juan Capistrano.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Juan Capistrano since 2001.