Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across San Bruno
If your gate is sagging, dragging, or latching loose in San Bruno, the problem is almost never the gate itself. It’s the hardware, the post, or a weld that let go. Gate parts and welding repair in San Bruno typically runs $180-$640 depending on whether we’re replacing hinges, setting a new post, or welding a cracked frame. We get to San Bruno the same day in most cases, and Hal Gatewood has been fixing gates here since 2001. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is San Bruno’s Preferred Gate Parts & Welding Company
We know the streets west of El Camino Real. We know the wind that comes through the San Bruno Gap and what it does to a gate’s hinge post over two or three seasons. That matters because a repair that would hold up fine in Millbrae will fail early here if you use painted steel and undersized fixings. Our Gate Parts & Welding team specifications for San Bruno already account for that.
Hal Gatewood’s name is on the shop, the shop address is published, and the license number is there for anyone to look up. We’ve been locally owned and owner-operated since 2001. Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no fine print.
San Bruno homeowners tend to call us after another company quoted one price on the phone and another at the door. That doesn’t happen here. The price is quoted and agreed before any work starts. And calls are answered by a live person 24/7, so when your gate won’t close at 9pm, you reach a person who can help, not a dispatch queue three states away.
Key Takeaways
- Hinge replacement in San Bruno runs $180-$340 per hinge set, including labor and hardware specified for coastal wind.
- Post replacement runs $420-$880 depending on depth, concrete condition, and whether we weld in place or set a new footing.
- Custom welding repairs run $140-$520, done on site so your gate stays in your driveway.
- Galvanized or stainless hardware is the standard here, not painted steel. The salt fog from the Gap eats painted fixings fast.
- Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job.
Our Gate Parts & Welding Services in San Bruno
Hinge Replacement
This is the most common call we take from San Bruno. Hinge replacement here runs $180-$340 depending on gate weight and whether we’re replacing the hinge straps alone or the hinge post mount as well. The salt-laden marine fog that rolls through the San Bruno Gap nearly every day accelerates rust on hinges dramatically, and the sustained westerly wind loading works loose the fixings. We replace with galvanized or stainless hinge hardware, not painted steel, so the job actually holds.
Post Replacement
A sagging gate in San Bruno is usually a hinge post problem, not a gate panel problem. Many of the postwar homes here were built with hinge posts set in cracked, aging concrete footings that have been loosened season after season by the gap wind. Post replacement runs $420-$880 in San Bruno. We dig out the old footing, set a galvanized steel post in new concrete, and weld or bolt the gate back true. Fix the panel without fixing the post and you’ll fix it twice.
Rail Repair
Gate rails take a beating here, especially on the elevated lots west of El Camino Real where the wind hits hard all year. When a rail bends or cracks, the gate starts binding and the operator starts working against the structure. Rail repair runs $160-$420 for most San Bruno residential gates. We straighten, weld, and reinforce in place, then re-check the operator torque so the motor isn’t carrying the extra load.
Custom Welding
Broken weld on a wrought-iron gate from the 1950s? Cracked frame at the corner joint? We weld on site in your San Bruno driveway, which usually saves you the cost and delay of hauling a gate to a shop. Custom welding runs $140-$520 depending on the extent of the repair. When a vintage gate has broken pickets or a hinge strap that tore loose, we can often repair and reinforce it rather than sell you a replacement gate you don’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bruno
We service and repair operators from Viking, Ghost Controls, DoorKing, Elite, and LiftMaster, among others. In San Bruno we see a lot of residential gates running DoorKing and LiftMaster operators that are undersized for the wind load the Gap delivers. If you’re replacing gate hardware and reusing an existing operator, we check the torque rating and the board condition before we say it will hold up. We don’t guess.
Common Gate Parts & Welding Problems We See in San Bruno Homes
- Hinge posts rocking loose in cracked 1940s-1960s concrete footings. The gap wind pulls and pushes all year, and an old footing that was marginal fifty years ago gives up fast. The gate sags at the hinge post first, not in the middle.
- Painted steel hinges and latch hardware rusting through prematurely. Salt fog reaches San Bruno nearly every day. Galvanized or stainless is the only spec that lasts on a gate near the fog line.
- Operator boards overheating and stripping out under constant wind loading. When the westerly wind keeps pushing against the gate, a residential-grade operator that would be fine in South San Francisco overworks and fails. The board or gearbox goes before the motor.
- Wood gate frames swelling and shrinking against steel hardware. The damp air near the Gap works its way into wood panels, and the constant dimensional change loosens screws and pulls fixings out. We specify through-bolted stainless hardware on wood gates here.
Pricing for Gate Parts & Welding in San Bruno, CA
Here are the ranges we quote most often in San Bruno. Hinge replacement: $180-$340. Post replacement: $420-$880. Rail repair: $160-$420. Custom welding: $140-$520. Latch and lock replacement: $90-$240. Gate roller replacement: $120-$300.
The main cost drivers are gate weight, post depth, and whether the existing concrete can be reused or needs a new pour. We quote the price before we start, and that price is what you pay. You also get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your gate.
San Bruno Local Pricing Notes
- Wrought-iron gates on the hillside streets west of El Camino Real typically run toward the higher end of hinge and post ranges because the wind load is heavier and the concrete is older.
- Wood gates in the flats south of San Bruno Avenue often need both rail repair and hinge replacement, which lands in the $380-$620 combined range.
- Salt-fog corrosion on latches means many San Bruno latch replacements include a stainless upgrade over the original painted steel part.
We Also Serve Cities Near San Bruno
If you’re just over the line in Millbrae, South San Francisco, Pacifica, or Burlingame, we serve those areas too. We know the difference between a gate sitting in the Gap’s wind path and one that’s shielded in the flats, and we quote accordingly. Learn more about Gate Parts & Welding in San Bruno and the surrounding Peninsula communities we cover.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in San Bruno
San Bruno sits in the San Bruno Gap, a low break in the coastal hills that funnels sustained westerly winds and salt-laden marine fog directly through the city. Millbrae and South San Francisco sit outside the Gap’s main path. The constant wind loading works hinge fixings loose while the salt fog accelerates rust, so hinges that last a decade in a sheltered South San Francisco yard can fail in three to five years on an exposed San Bruno hillside. Galvanized or stainless hardware is the fix. Call (877) 610-2993 for a hinge inspection, and we’ll tell you what you actually need.
Use galvanized steel, no exceptions on the fog line. Painted steel posts near the San Bruno Gap start showing rust bloom within a year or two because the salt fog sits on the metal daily. Galvanized posts set in properly poured concrete footings hold up for decades. We’ve pulled painted steel posts out of San Bruno yards that were installed less than five years earlier and already rusted through at the base. Spec it right once. Call (877) 610-2993 and we’ll quote the galvanized post the first time.
Check the hinge post, not the gate panel. On the hillside streets west of El Camino Real, the westerly wind from the Gap loads the gate constantly, and the hinge post is what takes that load. If the post is rocking in its footing, the gate sags at the hinge side and drags on the latch side. Tightening the hinges won’t fix a loose post. We replace the post and footing, then weld the hinge straps back true. Call (877) 610-2993 and we’ll check the post before you spend money on parts you don’t need.
Usually yes, but it depends on the operator’s torque rating and board condition. Many San Bruno gates are running LiftMaster or DoorKing operators that were undersized for the gap wind from the start, and replacing the gate without addressing that means the same overloaded motor now runs on a heavier or differently weighted gate. We check the existing operator’s rating and controller before we recommend keeping it. If the board is cooked from years of fighting the wind, reusing it just sets up your next failure. Call (877) 610-2993 for an honest read on your operator.
On a wood gate near the fog line, specify stainless steel hardware, especially for the hinge straps and latch. Galvanized works on many steel gates, but wood gates hold moisture against the hardware, and the salt fog turns that into a corrosion cell at the contact point. Stainless steel straps and through-bolts outlast galvanized by a wide margin on San Bruno wood gates and cost only marginally more. We quote both and tell you where each makes sense. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Parts & Welding in San Bruno
We’re a local crew that answers the phone with a live person day or night. The name is on the shop, the shop is on the map, and Hal Gatewood has been fixing gates since 2001. Free estimates, upfront pricing, the 90-Day Done Right Promise in writing, and no trip charge inside the county. Call (877) 610-2993 and you’ll speak with someone who knows San Bruno’s wind, fog, and old concrete better than most. If it’s not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Bruno since 2001.