Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rubidoux
Gate parts and welding in Rubidoux usually comes down to one question: can the gate be fixed where it stands, or does it need to be hauled off and replaced? Most of the time it can be fixed. We weld on site, in your driveway, and we have been doing it that way since 2001. A hinge that snapped, a post that heaved out of plumb, a slide gate that jumped its track during the last Santa Ana wind, we deal with those weekly across Rubidoux, from the ranch-style streets off Rubidoux Boulevard down to the acreage entrances along the eastern edge. If your gate is binding, sagging, or making noise you can hear from the house, call (877) 610-2993 and Hal will talk you through what he is seeing.
Why Gatewood Fence & Gate Is Rubidoux’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. That is the oldest accountability there is. When you call about a Rubidoux gate, you get a live person, not a voicemail queue, and you get someone who actually knows the difference between a gate that needs a hinge weld and a gate that needs a new post. A lot of the calls we get from Rubidoux homeowners start with “I already had another company look at it.” The gate is still broken. Fix the panel without the post and you will fix it twice. That is the kind of thing you learn after a couple decades of kneeling next to gate posts in the Inland Empire heat.
We serve Rubidoux from our Inland Empire office, which means the drive is short and nobody is charging you for a truck rolling in from two counties away. Every job carries our 90-Day Done Right Promise, stamped in writing. If it is not done right, one call brings Hal back. No runaround, no fine print games. And our pricing is quoted and agreed before any work starts. You will not see a bigger number at the door.
Our Gate Parts & Welding Services in Rubidoux
Hinge Replacement
Rubidoux has a lot of 1950s through 1970s wrought-iron and chain-link gates hanging on original hinges. Those hinges were not built for the Santa Ana wind loads that funnel through the river lowland. When a hinge weld cracks or the barrel wears egg-shaped, the gate sags at the latch side and starts dragging. We weld new hinge assemblies on site, usually in under two hours for a standard single gate. A typical hinge replacement in Rubidoux runs $140-$280 depending on the gate weight and whether the post is still sound enough to accept a weld.
Post Replacement
Here is the thing about Rubidoux soil. The clay expands when wet and shrinks when dry. After forty or fifty wet seasons, a gate post set in a shallow 1960s footing has moved. It happens to nearly every original post along the river lowland. When your gate post tilts, the gate binds, the operator burns out, and the latch stops lining up. We pull the old post, core the footing deeper, and set a new post in concrete that is poured below the active soil zone. Post replacement in Rubidoux typically runs $300-$600 including digging, concrete, and re-hanging the gate. If the gate is a wide swing gate on a long driveway, the job is heavier and we will walk the price with you before anything starts.
Rail Repair
Chain-link gates and ornamental iron gates both fail at the rail welds first. You see it on the older Rubidoux ranch homes: the top rail pops loose from the upright and the whole panel starts to flex. We cut out the cracked weld, straighten the rail, and weld it back. If the rail is too far gone, we fabricate a replacement rail to match the existing profile. Rail repair typically sits between $120 and $250 for a standard walk gate, less if we are already on site for another weld.
Custom Welding
Some Rubidoux properties have gates that were never a standard size, and some were built by hand decades ago. We fabricate brackets, extensions, drop rods, cane bolts, and custom fitments to match whatever is already in place. Solar gate opener brackets welded onto an existing farm gate, a longer leaf added to close a gap that has bothered you for years, a custom latch mount because the original hole is wallowed out. Custom welding is billed at an hourly rate of $85-$110, and you get a written price for the whole job before the first spark.
This is the core of what we do-Gate Parts & Welding on the gate you already own, in the place it already stands. We fix what can be fixed, and we tell you straight when a part is too far gone. That repair-first approach has kept our schedule full across Rubidoux for more than two decades.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rubidoux
If your gate has a Viking, Ghost Controls, or DoorKing operator on it, we work on those regularly. Same with the older LiftMaster and Elite units that are still running on Rubidoux properties. We keep common parts on the truck, and anything we do not have, we get quickly. A bad Ghost Controls control board or a DoorKing limit switch should not mean a week without a working gate. We will tell you how long the part takes, and we will honor that timeline.
Common Gate Parts & Welding Problems We See in Rubidoux Homes
- Swing gates racked off their hinges by Santa Ana winds. The river lowland funnels wind, and a tall wooden or iron gate catches a lot of it. After a few bad wind seasons, the hinge side drops and the latch side drags.
- Gate posts leaning from clay soil expansion. Rubidoux’s reactive clay and sandy loam push posts out of plumb slowly over the wet and dry cycle. The gate starts rubbing the post or the latch stops lining up.
- Slide gates that jump their track. Wind hitting the panel broadside before the loop detector reverses the motor is a classic Rubidoux failure. A twenty-footer becomes a sail, and the old steel rollers are not enough to hold it.
- Discontinued hardware on 1950s and 1960s gates. The original latches, hinges, and rollers on these older Rubidoux gates are no longer manufactured. We weld and fabricate replacements rather than telling you to buy a gate you do not need.
Pricing for Gate Parts & Welding in Rubidoux, CA
Here is a straight look at what Rubidoux gate work typically costs. Hinge replacement on a standard single swing gate runs $140-$280. Post replacement runs $300-$600 depending on post size, gate weight, and how deep we need to go to get below the heaving clay. Rail repair runs $120-$250. Custom welding runs $85-$110 per hour. Slide gate roller replacement with track cleanup usually lands between $200 and $400. A full operator service, where the motor is still good, typically runs $150-$250. These are real numbers, based on Rubidoux’s housing stock and the gates we actually see. The quote you get on the phone is the quote on the invoice because we price the job before we touch the gate. When the work is done, you know the number. Estimates are free, and there is no trip charge anywhere inside Riverside County.
We Also Serve Cities Near Rubidoux
We handle gates across the neighboring communities, too. If you are in Riverside, Grand Terrace, Glen Avon, or Pedley, the drive is short and the service is the same. But we are writing this for Rubidoux specifically because Rubidoux has its own set of complications. The unincorporated county piece matters, and we have been navigating it long enough to know when a job needs Riverside County Building & Safety and when it does not.
Serving Rubidoux, CA - Our Local Coverage Area
We’re based in the Rubidoux area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rubidoux
It depends on the scope, but if the post replacement is structural and the work is on Rubidoux property, the Authority Having Jurisdiction is Riverside County Building & Safety, not the City of Riverside. The county has its own permit portal, its own fee schedule, and its own inspection queue, and its code adoption cycle can lag behind what contractors just across the line in Riverside proper are used to. We know which jobs trigger a permit and which do not, and if a permit is needed, we handle the paperwork so the inspection gets scheduled correctly. Call (877) 610-2993 and describe the gate. We will tell you up front whether the county needs to be involved.
Because the problem is not the hinges. Rubidoux sits in the Santa Ana River lowland, and the seasonal wind loads here are strong enough to flex the entire gate panel. Add to that the clay soil under your gate posts, which expands and contracts with the wet and dry cycle, and what you get is a post that has shifted just enough to pull the gate out of alignment. Tightening the hinges does not fix the post. That is why we start at the hinge post, not in the middle of the panel. Your gate is sagging because its post has moved, and we fix the post. Call (877) 610-2993 and we will take a look.
Yes. That is one of the more common custom welding jobs we do on Rubidoux acreage properties, especially along the eastern edge where running mains power to the gate is not practical. We fabricate the bracket to fit your specific gate and opener, weld it in place, and make sure the panel is balanced so the opener is not fighting the gate from day one. The wind loads out there are serious, so we size the bracket and the hardware for the panel, not just the motor. Call (877) 610-2993 for a price.
It is common, but it is not something you should have to live with. Santa Ana winds push on a wide gate with a lot of surface area, and when the gate jumps before the loop detector can reverse the motor, you usually have worn steel rollers or a track that has packed with sandy loam. Sandy loam is exactly what the river lowland puts down, and it grinds into rollers like grit. We clean the track, check the rollers, replace what is worn, and adjust the loop detector sensitivity so the gate reverses before the wind can force it off. If the panel is too light for its width, we add bracing. Call (877) 610-2993 and tell us what your gate weighs and how wide it is.
You can almost always have it fixed, and you usually should. Original latches on 1950s and 1960s gates are no longer manufactured, but a worn latch is a small weldment. We rebuild the catch, fabricate a replacement strike plate, or build a custom latch that matches the old profile. A whole new gate is rarely the right answer when the panel is sound and only the hardware is gone. But we will tell you straight if the panel itself is too far gone. We would rather you spend $200 on a weld than $2,000 on a gate you did not need. Call (877) 610-2993 and we will come look at it.
On an acreage entrance off Rubidoux’s eastern edge, we re-welded a sagged 18-foot swing gate and replaced the original hinge post after the Santa Ana winds had twisted the panel off-plumb. We upgraded the hinge post with a deeper concrete footing to handle the clay-heavy soil’s seasonal heave, then re-hung the gate on a LiftMaster operator with a new safety photocell, because the old one was dead and the county inspector flagged it during the permit inspection. That job sums up Rubidoux for us: wind, clay, legacy hardware, and a county inspection that ran on its own schedule. It also sums up why we do the work the way we do. The post goes deeper than the old one. The safety cell gets replaced, not bypassed. The inspector signs off, and the gate swings straight the next time the wind blows.
If your Rubidoux gate is binding, sagging, off its track, or latched with a part nobody makes anymore, call (877) 610-2993. Hal answers the phone, and if it is an emergency, a live person is there around the clock. Estimates are free. The price is agreed before we start. And the work carries the 90-Day Done Right Promise in writing. That is how we have done it since 2001, and that is how it goes on every gate we touch in Rubidoux.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rubidoux since 2001.