Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across River Oaks
Gate parts and welding in River Oaks usually means one of two things: a hinge post that’s slowly leaning out of plumb, or a windstorm that just twisted a solid wood gate hard enough to crack a weld. Most jobs run between $180 and $650 depending on whether we’re replacing hardware or setting a new post footing. We’ve been doing this since 2001, and we answer the phone around the clock at (877) 610-2993.
Here’s the thing about River Oaks specifically: your gates sit on Tarrant County black gumbo clay, and that clay moves more than most people realize. When it rains, it swells. When it’s dry, it shrinks. Your gate post pays for it either way. A gate that worked fine in March can be dragging on the latch side by July.
Why Gatewood Fence & Gate Is River Oaks’s Preferred Gate Parts & Welding Company
We’re a local outfit, owner-operated since 2001, with Hal Gatewood’s name on the shop and on every invoice. That matters in River Oaks because this city runs its own permitting and code requirements, separate from Fort Worth. We work in River Oaks often enough to know which jobs need a call to the city first and which ones don’t. Out-of-area companies guess. We don’t have to.
When you call us, a live person answers. Not a menu tree. Not a call center three states away. If it’s 2 a.m. and your gate is stuck half-open after a storm, the person who answers can actually do something about it. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crew that shows up in River Oaks knows the streets, the soil, and the way these 1940s and 1950s homes were built.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no “that’s not covered.” We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in River Oaks
Our Gate Parts & Welding team handles everything from a seized hinge to a full post replacement with on-site welding. Here’s what we do most often in River Oaks:
Post Replacement
This is the job we do more than any other in River Oaks’s 76114 ZIP code. The original posts on your post-WWII home were set directly in expansive clay. After 60 or 70 years of swelling and shrinking, that post is leaning, cracked at the base, or both. We dig it out, set a new steel or treated post in a concrete collar with a wider base than the original, and reattach the gate so it swings true. We do this on-site, in your driveway. Your gate doesn’t leave your property.
Hinge Replacement
In River Oaks, a sagging gate is rarely just a bad hinge. Usually the hinge post itself has moved, and the hinge is the part that finally gave. That said, when the hinge is truly the failure point, we replace it with a heavier gauge than what was there originally. A $29 big-box hinge won’t survive one North Texas thunderstorm on a solid wood gate. We use hardware rated for the load your specific gate carries, not whatever the previous owner found on a shelf.
Rail Repair
Wind load is a real problem here. A solid wood infill gate catches wind like a sail, and after enough storms, the horizontal rails crack, splinter, or pull away from the frame corners. On chain-link gates from the 1960s, we often find the top rail bent downward from years of kids climbing over it. We straighten or replace the rail, re-tension the fabric, and make sure the gate doesn’t drag on the latch side.
Custom Welding
This is where Hal really gets to work. We fabricate and weld on-site: hinge brackets, gate frames, rack and pinion tracks for slide gates, post caps, latch plates. In the River Oaks neighborhood off Ohio Garden Road, we were called for a swing gate that had dropped 3 inches after a week of heavy rain. The customer assumed it was a broken hinge, but when we pulled the hinge post, the footing had cracked and the post was leaning 11 degrees out of plumb in the saturated gumbo. We set a new post footing with a larger concrete collar and rewelded the hinge brackets, then adjusted the operator’s limit switches so the rack and pinion tracked straight again. That’s the difference between fixing the symptom and fixing the job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in River Oaks
If your gate has a motor, we work on it. Our crews are certified on nine major brands including Viking, Ghost Controls, DoorKing, and Elite. We stock common replacement parts locally so a busted gate arm on a Ghost Controls opener doesn’t mean waiting three days for a part to ship from Ohio. On the welding side, brand doesn’t matter much; steel is steel. But an opener that’s been installed backwards or a safety edge that’s been disconnected is its own animal, and we see both regularly in River Oaks when a homeowner tried to save a buck with a handyman who didn’t know the first thing about gate automation.
Common Gate Parts & Welding Problems We See in River Oaks Homes
- Wind-torqued hinge posts on solid wood gates. A thunderstorm rolls through, the gate catches a 45 mph gust, and the hinge post twists in its footing. The welds at the frame corners crack first. You might not see it until the gate starts dragging or the post leans noticeably.
- Post bases rusting out in saturated clay. On the low western edges of River Oaks near the West Fork Trinity River floodplain, standing water sits around fence lines after heavy rain. The post base corrodes, the wood or steel rots, and the hinges tear free of the post entirely. It looks like a hardware problem but it’s actually a post replacement.
- Ice storm seizure on automated gates. A February 2021-style storm cracks wooden pickets and seizes the operator chain, leaving a swing gate stuck half-open. The manual release is either frozen solid or the homeowner doesn’t know where it is.
- Bent rack and pinion tracks on slide gates. Wind pushes the gate sideways, the track bends, and the operator’s gear strips the first time you try to open it. It sounds like a motor problem; it’s usually a weld and straighten job on the track.
Pricing for Gate Parts & Welding in River Oaks, TX
Here’s what you’re looking at for common jobs in River Oaks. A hinge replacement on a standard single swing gate runs $180 to $340 including parts and on-site welding. A post replacement where we dig out the old footing and set a new concrete collar runs $450 to $650 per post. Custom welding jobs like a cracked frame corner or a bent rack and pinion track run $150 to $400 depending on how much fabrication is involved. If you bring us a written estimate from another company, we’ll give you a free second opinion, and $40 off any repair over $200 applies too. Every price is quoted and agreed on before any work starts. You won’t open an invoice and find a surprise.
| Service | Typical Range in River Oaks |
|---|---|
| Hinge replacement (single gate) | $180 - $340 |
| Post replacement with new footing | $450 - $650 per post |
| Custom weld repair (frame, rack, bracket) | $150 - $400 |
| Rail repair or straighten | $120 - $280 |
Free estimates. No trip charge inside the county. And if you’re a senior or veteran, take 10% off any job.
We Also Serve Cities Near River Oaks
Our crews cover River Oaks and the surrounding communities in Tarrant County, including Fort Worth, White Settlement, Saginaw, and Haltom City. If you’re just outside the 76114 line, call us anyway. The gumbo clay doesn’t stop at the city sign, and neither do we. Learn more about Gate Parts & Welding in River Oaks or call (877) 610-2993.
Serving River Oaks, TX - Our Local Coverage Area
We’re based in the River Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in River Oaks
It depends on the scope. Replacing a single post in the same location as an existing footing generally doesn’t require a permit in River Oaks, but moving or widening a fence line, replacing multiple posts, or adding an automated opener usually does. River Oaks operates under its own municipal codes separate from Fort Worth, so what’s fine in Fort Worth isn’t automatically fine here. When we come out for a free estimate, we’ll tell you whether your job needs a permit, and we handle the paperwork if it does. Call (877) 610-2993 and ask.
Because the weld wasn’t the problem. The post moved. River Oaks sits on heavy Vertisol clay, also called black gumbo, that swells when wet and shrinks when dry. Over a 12-month cycle, your hinge post can tilt several degrees out of plumb. That tilt puts constant strain on the hinge and frame welds, and they crack again. Until the post footing is corrected, any weld repair is temporary. We fix the footing first, then the weld. It costs more up front, but you won’t be calling us back in a year with the same problem.
First, don’t force the gate. A gate that’s stuck because the operator lost power is different from one that’s jammed mechanically. Most Viking, Ghost Controls, DoorKing, and Elite operators have a manual release key or lever, usually on the side of the motor housing. If yours is frozen, rusted, or missing, you can call us and we’ll talk you through locating it on the phone. If that doesn’t work, we’ll send someone out. In River Oaks, we’re typically at your gate within the hour. Call (877) 610-2993 day or night.
No. Hinges don’t pull out of healthy steel. On River Oaks’s older chain-link gates, that failure usually means the post itself has rotted or rusted at the hinge height, especially if your property is on the lower, wetter western edge of 76114 near the river floodplain. We’ll come out, test the post with a hammer and a level, and tell you whether it’s a hinge swap or a post replacement. If it’s the post and we just put new hinges on, you’ll be back in the same spot before spring. Call (877) 610-2993 for a free estimate.
Yes, in most cases. We remove the bent section, straighten the rail if it’s salvageable, and weld a new piece of rack in place so the operator’s gear tracks cleanly. If the bent section is long or the rail itself is too far gone, we’ll tell you straight that it’s cheaper to replace the whole track than to patch it. We don’t weld work that won’t hold. Call (877) 610-2993, tell us what happened, and we’ll give you a straight answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving River Oaks and Tarrant County since 2001.