Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Redford
If you’re searching for gate parts and welding in Redford, MI, you’re probably looking at a sagging chain-link gate that won’t latch, a hinge post that’s leaning after one too many Michigan winters, or hardware that’s rusted through from decades of road salt. Most Redford gates were installed between 1945 and 1970, and the parts on them don’t match anything you’ll find on a shelf at the big box store. That’s where we come in. At Gatewood Fence & Gate, our Gate Parts & Welding crew welds on site, adapts modern parts to old tubing, and fixes what other companies want to replace. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Redford’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and he still runs it the same way: his name goes on the invoice, his number gets answered, and if a repair isn’t done right, he comes back. Redford homeowners deal with a specific set of Gate Installation - Redford problems tied to the township’s clay-heavy soil and aging housing stock. We know those problems because we’ve been welding in the alleys of 48239 and 48240 for years. The person who shows up at your door is background-checked, in uniform, and works for the same local company whose address is published and whose license number anyone can look up. No subcontracted crew. No three-states-away dispatch. Just our crew, our truck, our welding rig in your driveway.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. That’s not a slogan. It’s stamped on every invoice Hal signs. And calls are answered by a live person 24/7, which matters when your rear-alley gate won’t close at 9 p.m. and your dog is eyeing the gap. We also offer standing discounts that don’t require haggling: $40 off any repair over $200, no trip charge inside Wayne County, a free second opinion on any written estimate, and 10% off for seniors and veterans. You’ll know the price before we start. It’s quoted, agreed to, and put in writing.
Our Gate Parts & Welding Services in Redford
We’re a Gate Parts & Welding in Redford specialist, which means most of what we do happens in your driveway or alley, not in a shop. We bring the welder, the steel, and the parts. You keep your gate where it belongs. Here’s what we handle most often in Redford.
Post Replacement
Redford’s glacial clay soil holds moisture and heaves hard through freeze-thaw cycles. Over successive winters, hinge posts tilt several inches out of plumb, and the gate starts dragging on the latch side. We cut the old post out, drive a new footing below frost depth, set the post in concrete, and weld the hinge brackets back on square. On alley-access properties throughout 48239 and 48240, we routinely replace posts that have shifted so far the gate won’t close without being lifted.
Hinge Replacement
Those original 1960s mild-steel hinge pins and tension bands don’t survive decades of road salt spray from Redford alleys. We cut off the rusted barrels and weld on new hinges sized to your existing frame, even when the tubing is an odd gauge. That’s the key point: we don’t tell you to buy a whole new gate because a hinge failed. We fix the hinge.
Rail Repair
A sagging chain-link gate usually isn’t a bad panel. It’s a top rail that’s rusted through or a tension band that’s torn away from the post. Redford’s detached garages and alley access mean gates get used daily, often for 50 or 60 years straight. We repair the rail, square the frame, and re-tension the fabric so the gate swings clean and latches without a fight.
Custom Welding
Most off-the-shelf gate hardware is sized for modern 1-3/8-inch or 1-5/8-inch tubing. Redford’s original gates were often built with non-standard gauges that no modern hinge or bracket fits. We fabricate adapter plates, shims, and custom hinge assemblies on site. If a part doesn’t exist, we cut steel and weld one that works. That’s the whole point of our Gate Parts & Welding service: you don’t replace a gate because the hardware industry moved on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redford
We’re certified to service nine major gate brands, and on Redford jobs we most often work on Redford Gate Motor & Opener systems from Linear and Viking still running on original installs, plus Ghost Controls and DoorKing where automation was added later. We carry or can source parts for all of them, and if a bolt pattern changed between generations, we adapt the mounting plate rather than drilling holes that weaken the post. Redford’s mid-century gates deserve parts that fit the way the original did.
Common Gate Parts & Welding Problems We See in Redford Homes
After years of service calls across the township, certain patterns show up again and again.
- Frost-heaved hinge posts. Redford’s clay-rich soil swells when frozen and tilts posts out of plumb. In 48239 and 48240, we see swing gates that bind on the latch side by late February, every single winter.
- Salt-rotted hinges and tension bands. Alley gates sit close to road salt spray all season. The mild steel of the 1950s and 60s rusts through at the hinge barrel, and the gate tears away from the post even though the panel looks fine.
- Non-standard tubing that defeats modern parts. Original Redford chain-link frames were often built with odd gauge tube sizes. New hinges and tension bands from the store don’t clamp tight, so homeowners waste money on parts that slip and sag within a year.
- Shared driveways that force slide gates. Narrow rights of way between Redford bungalows leave no room for a swing gate. But the original post spacing rarely fits a modern rack-and-pinion kit without relocating or re-welding a post.
Pricing for Gate Parts & Welding in Redford, MI
Redford’s market is pretty consistent, and we quote every job before any work starts. You’ll know the number before we touch a wrench.
- Hinge replacement on a typical chain-link gate: $95-$185
- Post replacement with concrete footing below frost depth: $250-$425 per post
- Rail repair including welding and re-tensioning: $110-$260
- Custom welding and fabrication jobs: $150-$600 depending on steel and time
A full post replacement on an alley-access gate in Redford usually runs $250-$425 because we set the new footing below frost line, which is the only way to stop the heave cycle from repeating. We don’t charge a trip fee anywhere inside Wayne County, and the quote is agreed to in writing before the work begins. No invoice bigger than the quote. Ever.
We Also Serve Cities Near Redford
While this page is written for Redford homeowners, our crews regularly cross into Livonia, Farmington Hills, Dearborn Heights, and Farmington. If you’re just outside the township line, call (877) 610-2993 and we’ll tell you straight whether we can get to you the same day.
Serving Redford, MI - Our Local Coverage Area
We’re based in the Redford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Redford
The panel isn’t the problem. Redford’s clay-heavy soil heaves when frozen, lifting the hinge post out of plumb several inches over the course of a winter. The panel stays square, but the post leans, and the latch side of the gate drops until it drags. The fix is resetting or replacing the hinge post with a footing below frost depth, not tightening the panel. If your gate is sagging, call (877) 610-2993 and we’ll tell you whether it’s the post or the panel before we quote anything.
Yes, in most cases. If the post is still structurally sound and just the hinge barrels have rusted or snapped, we cut off the old hardware, clean the post, and weld new hinges directly onto it. This is a standard repair for us on Redford’s original mid-century gates. If the post itself is rotted or cracked, welding new hinges on won’t hold, and we’ll tell you that plainly. Either way, the quote is free.
Usually, yes. A latch post that leans toward the house on a 50-to-60-year-old Redford gate is almost always a sign the post footing has heaved or rotted below grade. We’ll dig down, check the depth and the condition of the steel, and then quote you a replacement only if it’s needed. When we do replace it, the new post goes in with concrete below frost depth so it doesn’t lean again in three years. Call (877) 610-2993 for a straight answer and a written price.
We carry the common modern sizes, but more importantly, we fabricate. Redford’s 1950s and 60s gates were often built with tube gauges that no current manufacturer supports. We cut, shim, and weld adapter plates so the new hinge or tension band grabs tight on the old frame. That’s the difference between a repair that lasts and a part that slips off in a year. If you’re not sure what size your tubing is, call (877) 610-2993 and we’ll talk you through measuring it.
Sometimes, but not always. Redford’s narrow shared driveways make slide gates popular, but the original post spacing rarely accommodates a modern Gate Access Control in Redford rack-and-pinion kit. We’ll measure the opening, check the existing posts, and tell you honestly whether a conversion makes sense or whether relocating one post is the better move. That’s where our on-site welding capability matters: we can modify the existing steel instead of tearing everything out. Call (877) 610-2993 and we’ll give you a free assessment and a written quote.
Call Gatewood Fence & Gate for Gate Parts & Welding in Redford
Your gate is original to a 1950s Redford bungalow, the hinge barrels are rusted through, and the post has heaved two inches out of plumb. You don’t need a new gate. You need someone who can weld. That’s what we do. Call (877) 610-2993 for a free estimate, a straight answer, and a repair that’s done right the first time, with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redford and Wayne County since 2001.