Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Randallstown
If your chain-link gate is dragging on the driveway off Old Court Road or the hinges have rusted through on a 50-year-old fence line in Randallstown, we can usually get someone to your house the same day. Our Gate Installation - Randallstown team handles welding repair that typically runs $145-$390 depending on whether we’re replacing hinges, re-setting a heaved post, or welding a cracked rail. A live person answers our phone around the clock at (877) 610-2993, and the price you’re quoted is the price you pay, agreed before any work starts.
We know Randallstown’s fences because we’ve been fixing them since Hal Gatewood started this company in 2001. The neighborhoods here, built mostly in the 1960s through the 1980s, are full of original chain-link gates that have outlived their hardware two or three times over. That’s not a problem for us. It’s most of what we do.
Why Gatewood Fence & Gate Is Randallstown’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001, and his name is on the shop, the invoice, and the truck. We’re locally owned and owner-operated, with a published address and a license number you can look up. When we say someone will show up in the window we promised, we mean it, because the person who shows up works directly for Hal, not a rotating cast of subcontractors.
Our Gate Parts & Welding team has fixed hundreds of gates in Randallstown’s split-level and colonial neighborhoods. We see the same things over and over: hinge posts that heaved out of the ground after a bad freeze-thaw winter, galvanized hinges that rusted until they snapped, and drop-rods so corroded they won’t slide. The difference is we fix the root cause. We cut out the rusted hinge, weld a new footing where the post needs it, and re-set the gate so it swings true and latches clean.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No runaround. And yes, a live person answers the phone 24-7. Not a voicemail. Not a call center. Hal’s crew.
Our Gate Parts & Welding Services in Randallstown
For homes in Randallstown, gate repair almost always comes down to three things: hinges, posts, and rails. We handle all of them, along with custom welding for gates that need more than a part swap. Here’s what that looks like on the ground.
Hinge Replacement
Most 40-60-year-old chain-link gates in Randallstown are still hanging on their original hinges. The galvanizing fails, rust eats through the metal, and one day the gate comes off in your hand. We replace hinges with heavy-duty galvanized pairs, weld where the frame has cracked around the hinge point, and re-set the gate so it doesn’t sag. A hinge replacement in Randallstown typically runs $145-$260 depending on gate weight and how much welding the frame needs. Fix the hinge without checking the post, and you’ll fix it twice, so we always check the post while we’re there.
Post Replacement
This is the job that separates a real fix from a temporary one. In Randallstown’s clay-heavy Piedmont soil, freeze-thaw cycles heave hinge posts out of plumb every few winters. The gate that closed fine in October drags by March. We dig out the old post, weld a new footing with a larger concrete mass below the frost line, and set the new post plumb. Post replacement in Randallstown typically runs $275-$420 including concrete and labor. Show me a gate closing on its own and I’ll show you where it’s failing, and around here it’s usually the post, not the panel.
Rail Repair
Chain-link top rails crack at the weld points after decades of kids swinging on the gate or snow load bending the frame. We weld the crack, reinforce the rail with a sleeve where the frame is thin, and touch up the galvanizing so the repair lasts. Rail repair typically runs $95-$185 in Randallstown for a single crack. If the rail is split in multiple places or the frame is bowed, a full re-weld might make more sense, and we’ll show you the difference before we cut anything.
Custom Welding
Not every gate problem is a simple part swap. If you’ve got a custom-width gate, an odd hinge layout, or a frame that’s cracked in a way off-the-shelf parts won’t fix, we weld on site. The gate stays in your driveway. We don’t haul it off, and we don’t try to sell you a new one when a weld would hold. Custom welding in Randallstown runs $120-$350 depending on the extent of the work, and we quote it before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Randallstown
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. If you’ve got an older chain-link swing gate that you’re converting to a solar operator, or a FAAC motor that’s been acting up, we can get the parts and install them through our Gate Motor & Opener in Randallstown service. We stock common hinges, latches, tension bands, and operator hardware for quick turnaround in Randallstown, so you’re not waiting a week for a part to ship from somewhere else. And when a part is genuinely done, we tell you. We don’t replace what doesn’t need replacing.
Common Gate Parts & Welding Problems We See in Randallstown Homes
- Clay-heaved hinge posts: The Piedmont clay under Randallstown swells and shrinks with every freeze-thaw cycle, slowly pushing gate posts out of plumb until the gate drags or the latch misses. Re-setting the post without a larger concrete footing means the same problem returns next spring.
- Corroded 40-60-year-old hardware: Original galvanized hinges, drop-rods, and tension bands on aging chain-link fences are rusted through or binding. The gate still stands, but the hardware fails under normal use.
- Rusted latch assemblies: When the drop-rod corrodes inside its guide, the gate won’t latch even when it’s perfectly aligned. We see this on nearly every original chain-link gate in Randallstown’s older subdivisions.
- Solar opener failures on acreage: Long driveways off Liberty Road and McDonogh Road often rely on solar gate openers without backup batteries. A cloudy stretch drains the system and the gate won’t open. We add battery backup or upgrade to a low-draw operator that handles Baltimore County’s winter cloud cover.
Pricing for Gate Parts & Welding in Randallstown, MD
Here’s what we typically charge in Randallstown, in plain numbers. Hinge replacement runs $145-$260. Post replacement runs $275-$420, including concrete and the new post. Rail repair runs $95-$185 for a single cracked weld. Custom welding runs $120-$350 depending on the job. Gate roller replacement runs $85-$145. Latch and lock repair runs $75-$180. These are the ranges we quote and agree to before any work starts. No trip charge inside the county. $40 off any repair over $200. And a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. The price we quote is the price on the invoice.
We Also Serve Cities Near Randallstown
If you’re in Milford Mill, Pikesville, Garrison, or Owings Mills, we cover those neighborhoods too. The same owner-operated crew, the same 90-Day Done Right Promise, and the same live-person phone answer around the clock. Gate Parts & Welding work in the Randallstown area starts with a phone call.
Serving Randallstown, MD - Our Local Coverage Area
We’re based in the Randallstown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Randallstown
The clay-rich Piedmont soil under Randallstown expands and contracts with freeze-thaw cycles, heaving hinge posts out of plumb every few winters. When the post moves, the hinge angle changes and the gate starts dragging or missing the latch. We see this every March. The fix is re-setting the post with a larger concrete footing, then replacing the hinges if they’ve been bent or cracked. Call (877) 610-2993 and we’ll tell you whether it’s a hinge job or a post job before we touch anything.
Yes, and we do it regularly for Randallstown homes with long driveways where running mains power isn’t practical. We install a low-draw solar operator, add a battery backup so cloudy weeks don’t lock you out, and reinforce the hinge and latch side of the gate first. The old chain-link frame usually needs some welding before it’ll handle the operator’s torque. Call (877) 610-2993 for a free measure and a written quote.
We cut the fence fabric loose from the post, dig out the old concrete, weld or bolt a new footing with a larger mass below the frost line, set the new post plumb, and reattach the fabric and gate. In Randallstown’s clay soil, we size the footing for the heave cycle so the post stays put. The whole job usually takes a day. Post replacement runs $275-$420 in Randallstown. Call (877) 610-2993 and we’ll give you an exact number before we start.
If the gate jerks as it moves and makes a grinding noise near the drive, that’s usually a worn rack or pinion. If it slides smoothly but sits crooked or rattles, it’s more likely a roller or track issue. We inspect both at the same time, because a worn rack will destroy new rollers and vice versa. We service FAAC, BFT, Linear, and Viking operators and offer Gate Access Control in Randallstown. Call (877) 610-2993 and describe the sound; we’ll tell you what we think before we come out.
Because the post moved. Randallstown’s clay soil heaves hinge posts during freeze-thaw cycles, pulling the gate out of plane so the latch misses by half an inch or more. Bending the latch bar is a temporary fix. We re-set the post with a deeper footing so it stays put, then re-align the latch. It’s the most common call we get every spring in Randallstown. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Randallstown and the surrounding Baltimore County communities since 2001.