Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Radcliff
Most gate problems in Radcliff come down to two things: worn parts and welds that were never quite right to begin with. We repair both, usually on the same trip. From hinge replacements on Woodland Drive to full post rebuilds near North Hardin High School, our Gate Parts & Welding crew handles it with a welding rig in the truck and parts that actually fit the gate you own. Need us today? Call (877) 610-2993 and a live person answers.
Radcliff gates take a beating. Clay soil heaves posts out of square. Winter ice bends hinges past their limit. And around Fort Knox, rental gates go years between real service because tenants rotate before problems get fixed. We know what that looks like, and we know how to make it right without charging you for work the gate doesn’t need.
Why Gatewood Fence & Gate Is Radcliff’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and he still runs it the way he did then: answer the phone, show up when promised, fix the gate in the driveway. That’s not a slogan. It’s how we work in Radcliff every week.
We’re the company landlords call when a Fort Knox PCS turnover inspection is days away and a sagging gate won’t latch. We’re the ones homeowners call after a national outfit quoted one price and insisted on replacing the whole panel when only a hinge was worn. Our reputation is built one gate at a time; every job carries a 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround.
Our response time to Radcliff is same-day on most repairs. The shop is a short drive from 40159 and 40160, so running parts out to a job on Hilltop Drive or Rogersville Road doesn’t take half a day. And because Hal’s name is on the shop and on every invoice, you know exactly who you’re dealing with. Drive to the shop and look him in the eye if you’d like.
Our Gate Parts & Welding Services in Radcliff
We don’t sell “gate replacement” as a default. We sell the right repair. Fix the panel without the post and you’ll fix it twice, which is why we start at the hinge post and work out from there. The list below covers what we do most often in Radcliff.
Hinge Replacement
Clay soil in this part of Kentucky shifts every winter. That movement rips hinge screws loose and bends steel hinge plates until gates rack out of square. We replace worn hinges with heavier-gauge steel and weld them where the old ones tore free. If the gate drags at the latch side of an opening on streets like Lincoln Trail or Bybee Avenue, the hinge is usually the culprit, not the panel.
Post Replacement
A leaning post is a structural problem, not a hardware problem. In Radcliff’s 1970s-1990s subdivisions we regularly pull rotted posts that were set in shallow concrete decades ago. The fix is a new post, set deeper with proper concrete, then re-hanging the gate so it swings true. We handle chain-link, wood, and steel post replacements for gates across 40159 and 40160.
Rail Repair
Rails crack at weld joints, sag under their own weight, or separate from the frame entirely. We weld new rail sections in place, often without removing the gate from the property. For older privacy gates in Radcliff’s rental neighborhoods, a rotted bottom rail is the most common reason a gate drags on the ground. That’s a weld-and-sister repair, not a whole new gate.
Custom Welding
Sometimes the part doesn’t exist anymore. That’s where on-site welding earns its keep. We fabricate hinge plates, reinforce corners, build brackets for operators, and patch steel frames. Everything stays in your driveway so you can watch the work happen. Hal has been welding since 2001, and it shows in the bead.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Radcliff
We service and stock parts for the operators Radcliff gates actually use. That includes Viking, Ghost Controls, and DoorKing models, along with several other major brands. Many older LiftMaster and Elite boards we see around Radcliff are obsolete and no longer supported, which is where the conversation gets honest: we tell you when a board is worth repairing and when a newer operator with a loop detector and safety photocell costs less over time. Because our team services these systems every day, we can usually identify the exact board or gear kit before we even roll up with the right part in the truck.
Common Gate Parts & Welding Problems We See in Radcliff Homes
- Leaning hinge posts that cause racked gates and failed latches. Expansive clay soil expands and contracts through Central Kentucky freeze-thaw cycles, gradually pushing posts out of alignment. That’s common across entire neighborhoods of 1970s-1990s tract homes where gates were installed at roughly the same time and are now failing at roughly the same rate.
- Dead or obsolete control boards on legacy swing gate operators. We regularly find LiftMaster and DoorKing boards in Radcliff rental properties that have been “patched” through multiple tenant cycles. The landlord finally gets a move-out inspection deadline and realizes the gate hasn’t worked properly in four years.
- Rusted or broken gate rollers on slide gates. Slide gates never serviced get rollers that grind into flat spots, then derail. This tends to surface in May through July when Fort Knox PCS season triggers rental inspections all over Radcliff at once.
- Cracked welds at stress points on steel gates. Gates welded years ago at the corners often crack right at the original weld. We grind out the old weld and lay a proper one, often adding a gusset plate so the joint doesn’t fail in the same place again.
Pricing for Gate Parts & Welding in Radcliff, KY
Here’s what gate work costs in Radcliff. Hinge replacement on a typical chain-link or wood gate runs roughly $185 to $390, depending on how many hinges and whether the post also needs attention. Post replacement with concrete work runs $340 to $700 per post; that includes removing the old post, setting the new one, and re-hanging the gate. Custom welding jobs like crack repair or bracket fabrication run $95 to $250 per section. Replacing an obsolete operator board is usually $280 to $650 installed, when parts remain available; if the board is truly dead and parts are gone, a new operator often makes more sense than throwing money at a discontinued board.
The price is agreed before we start. Not estimated, agreed. You’ll know the number when we’re standing there looking at the gate, and the invoice matches the quote. Call (877) 610-2993 for a free estimate, and remember: we offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Radcliff
Our gate repair and welding crews cover the communities around Radcliff too, including Fort Knox, Shepherdsville, Valley Station, and Fairdale. Whether you’re on the installation side of Fort Knox or out near the county line, the same team that fixes gates in Radcliff can reach you without a big delay. Same work, same 90-Day Done Right Promise.
Serving Radcliff, KY - Our Local Coverage Area
We’re based in the Radcliff area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Radcliff
The post, almost always. A sagging gate usually means the hinge post has leaned or rotted at the footing, and the panel is just along for the ride. In Radcliff’s clay soil, we see this constantly from late winter through spring. We reset the post and re-hang the gate; the panel rarely needs replacing. Call (877) 610-2993 and we’ll confirm what’s actually wrong before any work starts, with the price agreed first.
Usually no, and for a good reason. Welding a bracket to a post that’s leaning because the footing shifted just masks the problem. The freeze-thaw cycle in Central Kentucky will keep working on that post until the bracket shears or the concrete crumbles. A proper post replacement with deeper concrete is the fix that lasts. We’ll give you a straight answer and a number before we touch anything.
The honest answer: it depends on the board. Some 1990s LiftMaster boards are still available and can be swapped in about an hour for $280 to $480. Many are not. If we can’t get the board, patching it together to pass an inspection will cost you again in three months. We’ll tell you straight if a new operator, often a Viking or Ghost Controls model with modern safety inputs, is the cheaper move over the next few rental cycles. Hal will quote you on the spot, and the estimate is free.
Yes, in most cases. The rollers and rack wear together; replacing just one side leaves the other eating the new part. We see old slide gates around Radcliff with flat-spotted rollers that grumble and skip gears. That’s a derailment waiting to happen, and it will happen right when a PCS move-in inspection is scheduled. We replace the roller set and rack section together, weld any cracks in the frame, and torque everything to spec. The price is agreed before the first wrench turns, and the work is covered by the 90-Day Done Right Promise.
A properly welded hinge replacement on a stable post lasts 20-plus years; the hinge generally outlasts the rest of the gate. The real variable is the post. If the post is still solidly set, we weld heavy-gauge hinges to the frame and to the post in a way that spreads load across the weld instead of concentrating it at a screw hole. If the post is leaning or rotted, we fix the post first. Half the hinge replacements we do in Radcliff start as post problems, and we’ll tell you that up front. Call (877) 610-2993 for a free estimate and a straight read on your gate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Radcliff
If you own a gate in Radcliff, Kentucky, you need someone who knows the soil, the old operator boards, and the PCS inspection calendar. Hal Gatewood has been doing this work since 2001. His name is on the shop, his address is published, and his phone rings with a real person on the other end 24 hours a day. When you call about a leaning post, a dead operator, or a cracked weld, you’ll get a straight answer and a number you can hold us to. Call (877) 610-2993 today for a free estimate, no trip charge inside the county, and the 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Radcliff with gate welding and repair since 2001.