Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pound Ridge
Gate parts and welding in Pound Ridge usually means one of three things: a hinge post that’s heaved out of plumb, a weld joint that let go after a storm, or an older opener that simply won’t run anymore. We handle all three, and we do most of the work right in your driveway. Hal Gatewood has been at this since 2001, and his crew knows Pound Ridge’s particular headache: ledge rock sitting 18 inches below the surface in a lot of gate post locations. That changes how a post gets reset, and it’s why a generic fix doesn’t hold here. Call (877) 610-2993 and a live person picks up. Every time.
Why Gatewood Fence & Gate Is Pound Ridge’s Preferred Gate Parts & Welding Company
The name on the shop is Hal Gatewood, and the shop has a published address and license number anyone can look up. That’s the oldest accountability there is. We’ve been locally owned and owner-operated since 2001, and we don’t route calls to a call center three states away. When you call about a broken hinge on a custom iron gate off Westchester Avenue, the person answering knows what a hinge post is.
Pound Ridge customers get the same thing every customer gets: the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No fine print, no “up to” language. We also run background-checked, uniformed technicians on every job. And the person who shows up answers to Hal, not a regional manager who’s never seen a gate.
Response time to Pound Ridge works like this: we schedule a window, we show up in it, and if you’re inside the county there’s no trip charge. For a gate that won’t close and won’t secure the property, we treat it as the emergency it is. You’ll reach a human at (877) 610-2993, day or night.
Our Gate Parts & Welding Services in Pound Ridge
These four jobs cover most of what we actually do in Pound Ridge. If your issue doesn’t fit neatly into one, call anyway. We’ll tell you over the phone whether it sounds like a repair or a replacement, and we’ll be straight about the cost either way.
Hinge Replacement
Pound Ridge’s shaded, low-lying properties stay icy longer than surrounding towns, and that freeze-thaw cycle works on hinge posts all winter. A steel hinge bolted to a heaving post loosens, the gate sags, and the latch stops lining up. We cut out the old hinge, weld in a new one or bolt on a heavy plate hinge depending on the gate, and re-hang the leaf so it swings clean. Hinge replacement on a standard estate gate in Pound Ridge typically runs $180 to $420 per hinge, including the part and the labor to get the gate plumb again.
Post Replacement
This is the big one in Pound Ridge, because the soil here fights you. Much of the town sits on glacial till with ledge rock within 18 inches of the surface. When a post rots or heaves, digging a proper footing often means hitting rock before you reach depth. We don’t pretend the rock isn’t there. We surface-mount a steel plate anchor, weld the hinge post to it, and the gate ends up stronger than the original concrete footing. Post replacement in Pound Ridge generally runs $500 to $1,200 depending on the post size, the gate weight, and whether the site needs a plate anchor or helical pier. The price is quoted and agreed before any work starts.
Rail Repair
White oak and tulip poplar limbs fall on Pound Ridge gates with depressing regularity. A branch catches the top rail, the weld pops, and the whole gate twists. We straighten the rail, grind the old weld, and re-weld with the gate still in your driveway. Rail repair on a typical custom iron estate gate runs $250 to $600. If the damage is severe, we’ll tell you honestly whether a new rail section makes more sense than patching.
Custom Welding
Pound Ridge has very little subdivision stock. Nearly every gate job is bespoke: a heavy timber farm gate, an old colonial-era iron entrance, a custom bracket that was never a catalog part. We weld on-site, which means the gate stays in your driveway and you don’t lose two weeks while it sits in somebody’s shop. Custom brackets, hinge plates, reinforcing gussets, and crack repairs on cast or wrought iron are all in the regular rotation. Custom welding work in Pound Ridge typically runs $150 to $450 per job depending on scope, and you’ll get a written number before we strike an arc.
For full details on everything we do, see our Gate Parts & Welding team page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pound Ridge
We’re certified to service nine major gate brands, and in Pound Ridge we see a lot of FAAC and Viking operators on older estate gates, plus BFT and Linear on newer retrofits. We stock common parts locally so we’re not waiting on a distributor while your gate hangs open. When an older FAAC control board is obsolete and unavailable, we’ll tell you that plainly and price out a full operator replacement rather than patching a dead board. That’s the honest call, and it’s usually the cheaper call in the long run. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule: if it’s one of those, we can fix it.
Common Gate Parts & Welding Problems We See in Pound Ridge Homes
- Hinge post heave from freeze-thaw cycles. Shaded, low-lying areas of Pound Ridge stay frozen longer, and the repeated freeze-thaw pushes posts out of plumb. A gate that sags in the hinge post, not in the middle, is a post problem first.
- Storm-felled limbs bending top rails and breaking weld joints. The dense hardwood canopy over Pound Ridge means white oak and tulip poplar branches come down in every storm. We straighten bent rails and re-weld cracked joints on-site, but if the branch is still on the gate, clear it first.
- Legacy gate operators without modern UL 325 entrapment protection. Many Pound Ridge gates were hung before the law changed. Older FAAC and Viking control boards go obsolete and can’t be sourced. We’ll retrofit a new operator with proper safety photocells and current protection, done right.
- Rotted timber posts on heavy farm gates. Gentleman farms and historic properties around 10576 often have original timber gate posts that have been in the ground for decades. When rot reaches the hinge line, the post needs replacing, not patching. We’ll match the repair to the gate’s character or propose a steel upgrade that lasts.
Pricing for Gate Parts & Welding in Pound Ridge, NY
Here are the honest numbers for Pound Ridge’s market. Hinge replacement runs $180 to $420 per hinge. Post replacement runs $500 to $1,200 depending on whether ledge rock forces a surface-mount plate anchor or helical pier instead of a standard concrete footing. Rail repair and custom welding run $150 to $600 depending on scope. What moves the price is post size, gate weight, and whether the rock is shallow at the post location. We quote the job in writing before any work begins, and that number doesn’t change at the door. You’ll also get $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Pound Ridge
If you’re just over the line in Pound Ridge‘s neighboring towns, we work there too. We cover North Castle, White Plains, Hartsdale, and Harrison with the same owner-operated team and the same 90-Day Done Right Promise in writing. The drive is short, the crew is familiar, and the pricing doesn’t change because you’re one town over.
Serving Pound Ridge, NY - Our Local Coverage Area
We’re based in the Pound Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pound Ridge
Almost always, yes. A sagging gate in Pound Ridge usually means a hinge post that’s heaved or rotted, not a ruined gate. We reset or replace the post, re-weld the hinges, and re-hang the gate so it swings clean. The gate itself rarely needs replacement. If the post has heaved because ledge rock stopped the original footing short, we surface-mount a steel plate anchor and weld the post to it. That fix typically runs $500 to $1,200, and the gate stays in your driveway the whole time. Call (877) 610-2993 for an exact quote and we’ll schedule a look.
It depends on the control board. Older FAAC and Viking operators have boards that are no longer manufactured, and once they fail, there’s no legitimate repair. We’ll check the board, the limit switches, and the motor capacitor first. If it’s a failed capacitor or a bad limit switch, we fix it that day. If the board is dead and obsolete, we’ll price a full operator replacement with current UL 325 entrapment protection, because patching a dead board is throwing money away. Most replacement installations in Pound Ridge run $1,200 to $2,800 including the operator, the arms or chain drive, and a safety photocell. The price is quoted before any work starts.
Yes, that’s our regular bread and butter. Pound Ridge has more heavy timber farm gates than most of Westchester, and most of them need brackets or hinge plates that aren’t in any catalog. We weld them on-site, matched to the gate’s hardware and the post’s condition. Custom welding jobs in Pound Ridge typically run $150 to $450 per job. We’ll give you a written number before we start, and the job carries the same 90-Day Done Right Promise as a full gate installation.
Yes, and this comes up constantly on long private driveways in Pound Ridge where running utility power is a five-figure project. We install solar-powered operators and access control systems for exactly this situation, with a keypad, a vehicle loop detector, and a battery bank sized for the property’s usage. The gate doesn’t need utility power. We’ll also wire in a manual release so emergency access stays possible. A solar operator with keypad and loop detector on a Pound Ridge estate typically runs $3,000 to $6,500 depending on gate weight and driveway layout. Call (877) 610-2993 and we’ll walk the site with you before quoting.
Standard practice calls for a concrete footing below frost line, which in northern Westchester means roughly 42 to 48 inches deep. But Pound Ridge’s ledge rock frequently sits within 18 inches of the surface, so digging to frost line is often impossible. When we hit rock, we don’t chip at it hoping for the best. We surface-mount a heavy steel plate anchor to the ledge, weld the hinge post to it, and the post ends up stiffer than most concrete footings. If the rock is too deep for a surface mount but too shallow for full footing depth, we use helical piers driven to bearing. The fix is chosen for the site, not copied from a flatter town like Harrison where you can dig all day. Post replacement with a surface-mount or helical fix in Pound Ridge typically runs $500 to $1,200, quoted before work begins.
Gatewood Fence & Gate is the locally owned, owner-operated gate specialist that repairs what other companies want to replace. Hal Gatewood’s name is on the shop, his address is published, and he’s been at it since 2001. For gate parts and welding in Pound Ridge, call (877) 610-2993 for a free estimate. A live person answers, 24/7, and the price you’re quoted is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pound Ridge and Westchester County since 2001.