Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Poulsbo
Gate parts and on-site welding in Poulsbo means dealing with two things most gate companies never plan for: salt air off Liberty Bay and steep, wooded lots that make level installation a bad joke. A hinge that lasts ten years in Silverdale can seize up in three here because the marine layer carries salt right onto your hardware. That’s why we stock hot-dip galvanized and stainless components for Poulsbo jobs, and why we weld on site instead of hauling your gate to a shop. Hal Gatewood has been fixing gates since 2001. When you call (877) 610-2993, you get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Poulsbo’s Preferred Gate Parts & Welding Company
Hal’s name is on the shop and on every invoice. That’s the kind of accountability that matters when you’re hiring someone to weld a hinge post on a hillside above Liberty Bay. Our crew serves Poulsbo locally, and the work comes with the 90-Day Done Right Promise in writing: if it’s not done right, one call brings him back. No runaround, no hedge language about “in most cases.”
We’re not a nationwide outfit with a call center three states away. Dispatch and scheduling coordinate from our Seattle office, but the person who shows up in Poulsbo is background-checked, uniformed, and answers to Hal. Homeowners here between 50 and 70 have told us the same story again and again: a big company quoted one price on the phone and charged another at the door. We quote our price before any work starts and we stand by it.
On rural acreage entrances outside Poulsbo proper, long gravel driveways mean gate issues get worse before anyone notices. A sagging hinge lets the gate drag, the opener strains, and the post rots. By the time you hear the grinding, you’ve got three problems instead of one. We start at the hinge post, because a gate sags in the post, not in the middle.
Our Gate Parts & Welding Services in Poulsbo
Hinge Replacement
Most hinge failures in Poulsbo come from salt-air corrosion on steel components that were never meant for a marine environment. We replace them with hot-dip galvanized or stainless hinges sized to the gate’s weight and the slope it sits on. On a level driveway that’s straightforward. On a bluff lot above downtown, the hinge geometry changes: the gate has to swing with the grade, not against it. We get that angle right the first time so you’re not back here in two seasons.
Post Replacement
Rotten hinge posts are the most common call we take in Poulsbo’s older neighborhoods, especially the 1970s and 1980s homes on wooded lots above Liberty Bay. The lower post sits in pooled water where the gate meets sloped ground. Moss holds moisture against the wood year-round. We set a new pressure-treated post in a concrete footing, angled for the grade, then weld the hinge brackets in place so everything lines up true. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Cedar gates dominate Poulsbo, and cedar swells in our wet season. When the bottom rail binds against the latch post, the fix is usually a combination: trim the rail, seal the end grain, and check the hinges for salt corrosion. We’ll do all three in one trip. If the rail’s rotted through from standing water, we replace it and seal it so the same spot doesn’t fail again next winter.
Custom Welding
Generic replacement parts don’t fit every gate, especially on Poulsbo’s hillside lots where gates need to be racked or arched to follow sloped grade. Hal welds on site in your driveway. We fabricate hinge plates, patch rails, reinforce sagging corners, and weld operator mounts for automatic openers. If a big-name company wants to sell you a whole new gate because one weld broke, get a second opinion. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Poulsbo
We’re certified to service nine major gate brands, and in Poulsbo we see a lot of Ghost Controls solar openers on rural acreage entrances, Linear operators on subdivision gates, and DoorKing units on older automatic driveway gates. We stock common parts for these locally, which means a hinge or latch replacement doesn’t have to wait on a warehouse three states away. If your opener’s acting up and the brand isn’t on that list, call anyway. Hal’s seen most of them at this point, and if he can’t fix it, he’ll tell you straight instead of selling you a new one.
Common Gate Parts & Welding Problems We See in Poulsbo Homes
- Salt-air hinge corrosion: Gates within a few blocks of Liberty Bay take on salt and moisture constantly. Standard zinc-plated hinges rust at the pin, the gate gets harder to swing, and eventually the hinge welds crack. The fix is stainless or hot-dip galvanized hardware, and we keep both on the truck for Poulsbo jobs.
- Rotted hinge posts on hillside lots: Steep driveways above Liberty Bay pool water at the gate’s lower post. Cedar and pressure-treated posts both fail there first, and the gate starts dragging. We replace the post, angle it for the grade, and set it so water drains away instead of collecting.
- Wide acreage gates with undersized openers: Rural Poulsbo properties with 12- to 16-foot tube gates need an opener rated for the weight and wind load. A standard residential LiftMaster isn’t built for that span. We’ll tell you what your gate actually needs before you buy anything.
- Keypad and solar opener failures from damp: Moisture gets into keypads and control boards here more than in drier inland towns. Solar openers on long gravel driveways fail when the panel’s shaded by Doug firs or the battery’s shot. We troubleshoot the whole system, not just the part that beeped last.
Pricing for Gate Parts & Welding in Poulsbo, WA
A hinge replacement on a standard single driveway gate in Poulsbo typically runs $180 to $340, including labor and hot-dip galvanized hardware. Post replacement averages $350 to $650 depending on how deep we dig and whether the post sits on a slope that needs concrete work. Custom welding jobs are priced by the hour plus materials: figure $95 to $150 per hour with most brackets, patches, and operator mounts falling in the $200 to $400 range total. What moves the price is site access (long gravel driveways and bluff lots cost more than flat subdivision lots), gate weight and size, and whether the hardware needs stainless to survive the salt air. Every quote is free, written, and agreed before any work starts. No trip charge inside the county, and we honor a $40 discount on any repair over $200. Call (877) 610-2993 for your exact number.
We Also Serve Cities Near Poulsbo
Our gate parts and welding crew covers Poulsbo and the surrounding Kitsap communities. You’ll find us in Gate Parts & Welding in Poulsbo neighborhoods all week, and we regularly run jobs in Bangor Trident Base, Silverdale, Bainbridge Island, and Tracyton. If your gate’s acting up and you’re anywhere on the Kitsap peninsula, call and ask. Hal will tell you whether he can get there and when.
Serving Poulsbo, WA - Our Local Coverage Area
We’re based in the Poulsbo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Poulsbo
Poulsbo sits directly on Liberty Bay, so salt air and marine moisture settle on your gate hardware year-round, while Silverdale is inland enough to escape most of that salt exposure. Combined with 50-plus inches of rain, standard zinc-plated hinges in Poulsbo can seize in three to five seasons. The fix is to replace them with hot-dip galvanized or stainless hinges, which we carry on the truck for Poulsbo jobs. Call (877) 610-2993 and we’ll come look at what’s on your gate now before it fails completely.
On a sloped lot, water pools where the gate’s lower rail meets the ground, and the hinge post absorbs that moisture for months at a time. The proper fix isn’t just a new post: it’s a pressure-treated or galvanized steel post set in a concrete footing at the correct angle, with drainage sloped away from the base. Our crew replaces posts on Poulsbo bluff lots regularly, and we weld the hinge brackets in place so the geometry stays true even as the gate swings with the grade. Call for a free estimate; Hal will look at the fall of your driveway and tell you exactly what’s needed.
No, a standard residential LiftMaster usually isn’t rated for the weight, wind load, and span of a 12- to 16-foot tube gate on rural acreage. You’ll need a heavy-duty operator rated for the gate’s size and the terrain it swings over, and the mounting plate may need custom welding to fit your post. We weld operator mounts on site and we’ll tell you which model actually fits your gate rather than selling you one that burns out in a year. Call (877) 610-2993 with your gate’s width and material and we’ll get you a real answer.
Yes. Solar-powered gate openers work well in Poulsbo if the panel’s positioned for our wet winters and the battery’s sized for the gate’s cycle count. We’ve installed Ghost Controls solar systems on acreage entrances across rural Poulsbo, welding the operator mount and rack to fit the gate without trenching power from the house. The key is choosing a panel and battery that can handle our cloudy season, not just July. Call (877) 610-2993 and we’ll tell you what your driveway actually needs, free of charge.
Yes, and it’s one of the most common calls we take in Poulsbo’s wet season. Rain and condensation get into keypad seals and corrode the contacts, causing missed keystrokes or a blank display. It’s usually fixable with a weather-rated keypad and liberal sealing of the wiring connections, but if your keypad’s older than a few seasons of Poulsbo rain, replacement is the better call. We’ll diagnose it on site and quote the fix before any work starts. Call (877) 610-2993 if it’s leaving you standing in the rain.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Poulsbo with gate parts and welding since 2001.