Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pompano Beach
Gate parts and welding in Pompano Beach usually falls into two camps: rusted hinges and posts that have finally given out, or storm damage that bent a panel and stripped the operator gears. Hinge replacement around here typically runs $220-$480, a new gate post set in concrete costs $350-$900 depending on size, and rail repair on a slide gate lands between $300 and $750. Most jobs are done same-day or next-day because we carry steel stock, hinges, and common operator parts in the truck. Call (877) 610-2993 and a live person answers.
If you live east of US-1 near the Intracoastal or out west past the Turnpike in a 1980s HOA community, you already know the salt air and the wind are harder on gate hardware here than inland Broward. That’s exactly why our Gate Parts & Welding work in Pompano Beach starts with understanding what failed and why, not just swapping a part and hoping it holds.
Why Gatewood Fence & Gate Is Pompano Beach’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That means something when a Pompano Beach HOA board is staring at a locked-open community gate on a Friday afternoon and needs someone who will answer the phone, show up, and weld it back together the same day. We’re not a call center. We don’t route your repair through three states. You call, Hal or one of his crew picks up, and you know exactly who is coming.
Pompano Beach customers call us because we repair what other companies want to replace. A sagging gate usually means a failed hinge post or a rusted hinge, not a whole new gate. We weld on site, in your driveway or at the community entrance, so your gate never leaves the property. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No fine print, no runaround.
We also keep pricing straight. The price is quoted and agreed before any work starts. Not an estimate that grows at the door. Hal has been burned himself, and he won’t do it to you. You’ll see the same flat-range pricing on this page that you’ll hear on the phone.
Our Gate Parts & Welding Services in Pompano Beach
Hinge Replacement
In Pompano Beach, steel hinge bolts on swing gates rust out fast. The salt-laden air off the Intracoastal and the Atlantic accelerates corrosion even in neighborhoods like Cypress Bend or Garden Isles that sit well back from the sand. We replace worn or seized hinges with new steel or powder-coated hardware sized to the gate weight, and we shim and weld the hinge brackets so the gate hangs square again. Hinge replacement in Pompano Beach typically runs $220-$480 per gate, including parts and labor.
Post Replacement
Here’s what we see constantly on Pompano Beach’s older east-side homes: the gate was added years after the house was built, set in a shallow footing, and now the post has leaned or cracked. Saturated ground after heavy rain shifts footings, especially on narrow lots off Dixie Highway or Atlantic Boulevard where concrete is old and the soil is sandy. We cut out the failed post, dig a deeper footing, set a new steel post in concrete, and re-hang the gate true. Post replacement in Pompano Beach generally runs $350-$900 depending on post size and footing depth. Fix the post without the hinge and you’ll fix it twice.
Rail Repair
Slide gates on Pompano Beach’s western HOA communities, think neighborhoods off Wiles Road and Sample Road in 33067 and 33073, take a beating during hurricane season. Wind load on a solid infill panel bends the rail and strips the rack and pinion teeth. The gate then jams mid-track. We straighten or replace the rail, weld new rack sections where teeth are stripped, and realign the rollers so the gate runs without grinding. Rail repair in Pompano Beach runs $300-$750, and we carry steel rail stock in the truck.
Custom Welding
Sometimes the gate itself is fine but a hinge tab snapped, a welded joint cracked, or the decorative scroll work broke loose. We do custom welding on site for exactly these cases. Steel, aluminum, wrought iron, whatever the gate was built with. If a previous repair left a bad weld, we grind it out and do it right. Custom welding repairs in Pompano Beach start around $150 and go up based on scope. We’ll quote it before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach
We work on gates and operators from DoorKing, Linear, and Viking regularly, plus the rest of the major brands. For Pompano Beach customers we keep common DoorKing and Elite slide-gate parts in stock since so many 1990s-era communities out west still run those original operators. That means fewer days waiting on a part. If your operator is beyond repair, we’ll tell you straight and give you a written price for replacement before any work begins.
Common Gate Parts & Welding Problems We See in Pompano Beach Homes
- Salt corrosion on hinges and frame welds. The Intracoastal runs right through Pompano Beach, and the salt-laden air eats steel hinge bolts and aluminum welds within five to seven years. A gate that sags is usually the symptom; the cause is a rusted hinge or a cracked weld at the frame.
- Hurricane wind load on solid infill gates. Wind catches a solid panel like a sail, bending slide rails, warping gate panels, and stripping rack and pinion gear teeth. After a storm passes, we find gates stuck mid-track all over Pompano Beach, from the beachside streets to the HOA loops off McNab Road.
- Post footings shifting in saturated ground. Pompano Beach’s sandy soil drains fast, but after heavy rain, older shallow footings shift. Concrete-block homes from the 1950s through the 1970s on the east side often have aftermarket gates set in footings that were never deep enough. The post leans, the gate drags, and the operator motor burns out trying to move it.
- Single operator serving dual lanes in HOA communities. In Pompano Beach’s western HOAs, one operator often controls both a resident lane and a visitor lane. When that unit fails, the whole community is locked open or locked out. It’s an urgent call, and HOA boards don’t want to wait three days for a part.
Pricing for Gate Parts & Welding in Pompano Beach, FL
Here’s what Pompano Beach gate repairs actually cost, based on the work we do week in and week out:
- Hinge replacement: $220-$480 per gate
- Post replacement (steel post, concrete footing, re-hang gate): $350-$900
- Rail repair on a slide gate: $300-$750
- Custom welding repair: starts around $150, quoted before work begins
- Operator gear assembly or control board replacement: $400-$1,100 depending on brand and model
What moves the price: gate size, post depth, whether we’re cutting out an old footing, and how much steel needs replacing. The price you’re quoted is the price you pay. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote, estimates are free.
One more thing about Pompano Beach pricing: the western HOA belt, ZIPs 33063, 33065, and 33067, has dozens of planned communities built from the late 1970s through the early 1990s. Their original gate operators are all aging out around the same time. That means full-system replacements are becoming as common as service calls, and HOA boards usually need a written price for both the repair and the replacement option at the same visit. We’ll give you both, in writing, before you decide.
Storm and Wind Exposure: What Pompano Beach Gates Go Through
Pompano Beach sits astride the Intracoastal Waterway with the Atlantic on its eastern edge. That geography means gate hardware corrodes faster than in, say, Coconut Creek or Margate, even at properties set well back from the water. The salt-laden air causes galvanic corrosion on aluminum frames and rust failure on steel hinge bolts. Inside gate operators, the printed circuit boards degrade faster too. We see control board failures on Pompano Beach gates in half the time we’d expect in an inland city.
Then there’s wind. During hurricane season, a solid infill gate catches wind load like a wall. Swing gate arms warp. Slide gate rails bend. Rack and pinion gear teeth strip when the panel torques against the drive. We replaced a rusted hinge post and re-welded the swing gate arm on a 1980s-era townhome community off Wiles Road in 33073 after hurricane winds bent the gate panel and stripped the rack and pinion. Our crew set a new post footing in saturated sandy soil, swapped the LiftMaster operator’s damaged gear assembly, and had the resident lane and visitor lane back on separate loop detectors before the HOA’s emergency board meeting that evening.
Out in the western planned communities, ZIPs 33063, 33065, and 33067, the problem compounds. These communities were built in the 1980s and 1990s with gate infrastructure installed as original equipment, now 30 to 40 years old. Many use a shared single-entry control system where one operator serves both a resident lane and a visitor lane. When that unit fails, the entire community is locked open or locked out. HOA boards don’t have the luxury of waiting a week for parts. Same-day welding and parts replacement is the standard out here, and the liability pressure is real.
Manual Release: What to Do When the Power Is Out
After a hurricane knocks out power, you’ll need to open the gate manually to get your car out. Every automatic gate operator has a manual release mechanism, usually a pull knob, keyed release, or a crank handle on the operator housing. On most DoorKing and Linear slide gate operators, you’ll find a keyed release on the side of the operator box; turn the key a quarter turn, then pull the release handle. On swing gate arms, look for a pull knob at the hinge point where the arm meets the gate bracket. Pull it out, and the arm disengages so you can push the gate by hand.
If you’re not sure where your release is, call us at (877) 610-2993 and we’ll walk you through it on the phone. Do not force the gate. If a panel is wedged or a rail is bent, forcing it can snap a hinge or damage the operator gears. That turns a $50 fix into a $700 repair. After the power comes back on, reset the operator according to the limit switch settings, and test it in manual mode before going back to automatic.
We Also Serve Cities Near Pompano Beach
Our Gate Parts & Welding in Pompano Beach crew also covers Coconut Creek, Margate, Lighthouse Point, and Pompano Beach Highlands. If your gate is rusting out or storm-bent just across the city line, the same team and the same pricing apply. We don’t meter the clock by city limits.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pompano Beach
You don’t have to see the ocean for salt air to reach your operator. The Intracoastal Waterway runs right through Pompano Beach, and the salt-laden air travels well inland, especially with the prevailing easterly breeze. That airborne salt corrodes PCB traces and terminal connections inside operator control boards, which is why boards in Pompano Beach fail far faster than in inland Broward cities. We see it constantly in neighborhoods like Palm Aire and Cypress Bend, miles from the beach. If you’re on your second or third board, we can inspect the housing for moisture intrusion and recommend a sealed enclosure upgrade. Call (877) 610-2993 and we’ll give you a straight answer.
Yes, and most of the time we prefer to. If the gate panel is still square and the steel isn’t rotten, we can re-weld the hinge tabs, add diagonal bracing to stiffen the frame, and straighten or replace the arm. Reinforcing a swing gate after storm damage typically costs less than half of a full replacement. A full panel replacement only makes sense when the frame is rotted through or the panel is so warped it can’t be straightened. We’ll show you the difference in person and quote both options before any work starts.
Locate the manual release on your operator. On slide gates, it’s usually a keyed release on the operator housing; on swing gates, it’s a pull knob at the hinge point of the arm. Turn or pull the release and the gate disengages from the motor so you can push it by hand. If the gate is wedged from wind damage or a bent rail, don’t force it, call us at (877) 610-2993 and we’ll talk you through it. Forcing a jammed gate is how a $50 release repair becomes a $700 gear replacement.
The biggest mistake is letting a gate operator stay failed for a week while they collect bids, leaving the community locked open or locked out. In Pompano Beach’s western HOA belt, especially the 1980s and 1990s communities off Wiles Road, Sample Road, and McNab Road, many gates run on a single operator serving both resident and visitor lanes. When that unit fails, the whole community is exposed. HOA boards that wait end up paying more in the long run, because weather and theft damage compound the original failure. We’ll come out and give you a written repair or replacement price the same day you call, so your board can make a decision that night.
Yes. We keep common DoorKing and Elite slide gate parts on the truck and in stock specifically because so many Pompano Beach communities from that era still run those original operators. That means less waiting for a part to ship. If your DoorKing 9300 or Elite SL3000 needs a gear assembly, limit switch, or new control board, there’s a good chance we have it or can get it same-day. Call (877) 610-2993 with your operator model number and we’ll tell you exactly what we’ve got.
Call Gatewood Fence & Gate for Gate Parts and Welding in Pompano Beach
If your gate is sagging, rusted through, storm-bent, or stuck mid-track, call us at (877) 610-2993. A live person answers. We’ll give you a straight price over the phone, no trip charge inside the county, and we’ll tell you honestly whether you need a repair or a replacement. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pompano Beach and Broward County since 2001.