Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Plantation
Gate hardware in Plantation fails differently than it does ten miles inland. Our team has welded, braced, and rebuilt enough canal-adjacent gates across this city to know exactly where the corrosion starts and what actually stops it. If your gate sags, scrapes, or won’t close square, call (877) 610-2993 and Hal Gatewood or one of his crew will be out to look at it. We show up when we say we will, quote the price before any work begins, and stand behind every repair with a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Plantation’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That matters when you are looking at a corroded hinge post or a cracked weld and wondering who is actually going to fix it. We are not a call center. A live person answers our phone around the clock, and when you need someone in Plantation, the person who shows up has been doing this work for decades.
Plantation homeowners ask us to fix what other companies want to replace. We weld on site, in your driveway, so your gate doesn’t get hauled off to some shop you will never see. The crew works in Plantation regularly, knows the HOA-governed subdivisions along Broward Boulevard and the older canal-laced neighborhoods back toward West Broward Boulevard, and understands what those original 30-to-50-year-old operators are doing when they act up. You get straightforward answers and a price quoted before the first cut is made. Gate Parts & Welding is what we do every day, and we do it the old way: fix it right, stand behind it, and be easy to reach.
Our Gate Parts & Welding Services in Plantation
Hinge Replacement
Hinges fail first in Plantation. Persistent humidity and salt-tinged air along the canal network eat through painted steel in a fraction of the time you would expect in drier parts of Broward. We see hinge pins seized solid and leaf plates rusted through. When that happens, the gate drops and the sag drags the whole panel out of alignment. We cut out the old hinge, weld in new stainless or properly coated hardware, and reset the gate so it swings without binding. Fix the hinge before the post twists and you save yourself a much bigger repair.
Post Replacement
A sagging gate is usually a post problem. In Plantation, the failure is often the post itself, corroded from standing water just a few feet away. In a canal-adjacent HOA community off Broward Boulevard, we replaced a severely corroded hinge post on a 1980s swing gate where salt-tinged moisture had eaten through the original painted steel. Our crew cut out the old post, poured a new post footing with stainless anchor bolts, and welded a reinforced hinge bracket before hanging the existing gate panel. That corrected a sag that had already snapped two hinge replacements. We set posts in proper concrete, use stainless fixings, and weld brackets that hold up to the moisture instead of succumbing to it.
Rail Repair
Slide gates live and die by their rails and racks. Plantation’s slide gates take a beating every hurricane season when storms and debris push on the panel and the track takes the load. We repair bent rails, replace broken rack sections, and reweld mounting points that have torn loose. If your gate jerks or grinds near the motor, get it looked at before the pinion chews through the rack and turns a rail repair into a full rack replacement.
Custom Welding
Some repairs need a jig, a welder, and somebody who actually understands how steel moves under load. We weld cracked frames, reinforce rust-thinned gate panels, fabricate replacement brackets, and build custom post caps or gate extensions on site. The welding happens in your driveway, which means you see the work and we both know exactly what was done. No hauling, no mystery shop, no invoice that grows while the gate is out of your sight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation
We work on the operators Plantation HOA communities actually run. That includes Viking and Ghost Controls swing-arm systems still spinning 40-year-old gates, plus DoorKing and Elite slide operators running hundreds of Open/Close cycles a day at community entries. Our crew can source and install proper parts for all of them. We stock common hinges, brackets, rollers, and latch hardware so most Plantation repairs can happen in a single visit. If a part isn’t on the truck, we tell you upfront and get it ordered the same day.
Common Gate Parts & Welding Problems We See in Plantation Homes
- Galvanic corrosion on steel hinge posts near canal water: When a steel post sits within feet of standing water year-round, the base rusts from the inside out. The gate leans, the hinges bind, and the post eventually twists. We see this constantly in Plantation’s canal-laced subdivisions and it rarely shows up in neighboring Davie or Sunrise without the same waterway grid.
- Rust-through of painted steel hinges and latch hardware: Broward’s humidity and salt air eat painted steel fast. Hinge pins seize, leaf plates flake apart, and latches stop latching. We replace them with stainless or properly coated hardware made to take the moisture.
- Misaligned slide gate racks and broken rack teeth after storms: Hurricane-driven debris and post-storm settling knock slide gates off their tracks and tear up rack and pinion systems. Every fall we get calls from Plantation communities with grindy, jerky gates that were fine in June.
- Aging swing-arm operators on original 30-to-50-year-old gates: Many Plantation HOAs still run the operators installed when their communities were built. The gates work until a hinge or post sags enough to make the operator strain, and then the limit switches and circuit boards start failing. The fix is usually mechanical first, not electronic.
Pricing for Gate Parts & Welding in Plantation, FL
Here is what we typically charge for common gate parts and welding work in Plantation. A single hinge replacement usually runs $180-$320 depending on whether we are welding in a new bracket or just swapping hardware. Post replacement, including cutting out the old post, pouring a new footing, and welding the hinge bracket, generally lands between $500 and $900. Rail repair on a slide gate, including straightening and rewelding mounting points, typically costs $250-$550. Custom welding work runs $100-$180 per hour plus materials for brackets, extension kits, or frame reinforcement. We quote every job in writing before any work begins, and that price does not change at the door. Remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Plantation
If you’re in Broadview Park, Lauderhill, Lauderdale Lakes, or Fort Lauderdale, our crew covers those areas too with the same on-site welding and repair-first approach. Plantation is one of the communities we know best, and the surrounding cities share a lot of the same corrosion problems and aging HOA operators.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Plantation
Plantation’s original 1950s master plan threaded dozens of canals through residential subdivisions, which puts gate posts and hinge hardware within feet of standing water year-round. That constant moisture plus Broward’s salt-tinged air creates galvanic corrosion that eats painted steel far faster than in drier inland cities like Davie or Sunrise. Stainless hinges and properly coated steel last significantly longer here. Call (877) 610-2993 if your hinges are flaking or the gate is starting to sag.
We can sometimes weld a cracked post in place and add a reinforcing plate to buy time, but a post that has cracked usually cracked because water got inside and rust is working from the inside out. In most Plantation cases, especially near canals, full replacement with a new post footing and stainless anchor bolts is the repair that actually lasts. We’ll tell you straight which one your post needs before any work starts.
Yes. We regularly service original swing-arm operators on Plantation community gates that are decades old. Many of them are still mechanically sound, and the real problem is a sagging post or seized hinge putting a load on the operator it was never built to carry. We fix the mechanical side first, then get the operator dialed back in. Call (877) 610-2993 for an exact quote; estimates are free.
Storm winds push on the gate panel and debris gets jammed in the track, which bends the rail, knocks the gate out of alignment, and forces the pinion to chew on rack teeth that are no longer meshing properly. We replaced broken rack sections and rewelded rail mounts on several Plantation slide gates last fall after the storms. A proper weld repair on a bent rail is usually faster and cheaper than waiting for the whole rack to fail. Call us to get it looked at before it locks up completely.
We recommend stainless anchor bolts, galvanized or powder-coated post sleeves at the base where standing water sits, and welding a reinforced hinge bracket plate instead of relying on surface-mounted hardware. Those upgrades cost a little more up front but they stop the corrosion pattern that keeps killing standard painted posts within a few years. For a free assessment of your canal-adjacent gate, call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts & Welding in Plantation
If your gate sags, scrapes, or won’t hold square, don’t wait for a hinge to snap or a post to twist. Call (877) 610-2993 and talk to a live person. We’ll schedule a time that actually works, show up in the window we promised, quote the full price before any work begins, and put the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the person who does your welding answers for the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plantation and greater South Florida since 2001.