Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pinehurst
Gate parts and welding in Pinehurst usually means one of three things: a hinge post that’s moved with the frost, a wood frame that’s been splitting for a decade, or an operator board that predates the iPhone. We fix all three. Gatewood Fence & Gate has been owner-operated since 2001, and our Gate Parts & Welding crew carries stock for the common failures we see along the Reading line and throughout the 01866 ZIP. If your gate sags, binds, or won’t hold a latch, call (877) 610-2993. A live person answers, and the estimate is free.
Key Takeaways
- Post replacement and footing repair in Pinehurst typically runs $380-$900 per post, depending on depth and frost heave damage.
- Hinge replacement on a wood gate averages $145-$320, including realignment.
- Custom on-site welding for cracked rails or gate frames generally falls between $240 and $600.
- We service legacy operators, including older DoorKing, Linear, and Viking boards, and we’ll tell you plainly when a board isn’t worth saving.
Why Gatewood Fence & Gate Is Pinehurst’s Preferred Gate Parts & Welding Company
The reason folks around Pinehurst keep our number is simple: Hal Gatewood’s name is on the shop, and the person who shows up is the person who stands behind the work. We don’t send a sales rep to size up your gate and a crew to do something different later. One call, one crew, one written price before any work starts. That price doesn’t change at the door.
We’ve worked enough gates in the 01866 area to know the soil as well as the hardware. Pinehurst yards sit on that old glacial clay, and it shifts every winter. A gate that hangs true in October can be dragging the latch by mid-March. We plan for that. When we reset a post here, we go deeper than the original footing and add cross-bracing where the clay will push hardest. That’s local knowledge, not a sales pitch.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no phone tree. And if you’ve got a written estimate from another company, we’ll give you a free second opinion before you spend a dime with us.
Our Gate Parts & Welding Services in Pinehurst
Hinge Replacement
Wood gates in Pinehurst’s mid-century colonials and capes were often hung with hinges that were undersized the day they went in. Add forty years of seasonal swelling and shrinking, and those original strap hinges snap or pull loose from the post. Hinge replacement in Pinehurst typically runs $145-$320, which includes pulling the gate, setting it back to plumb, and using hardware that matches the gate’s actual weight. A sagging gate rarely starts at the middle. It starts at the hinge post, and that’s where we start.
Post Replacement
Frost heave in the clay-heavy soil along the Reading line is the single biggest reason posts in Pinehurst move out of plumb. We’ve seen hinge posts pushed a full two inches out of square after one hard winter. When a post is gone, no hinge will save you. Post replacement and footing repair runs $380-$900 per post, and that includes digging the old footing, setting the new post below the frost line where possible, and bracing it against the lateral push that makes this ZIP different from sandy-soil towns. We don’t cut corners on concrete depth here. The soil won’t allow it.
Rail Repair
Nor’easters and the dense tree canopy around Pinehurst mean falling branches are a routine event, not a fluke. A branch drops on a wood gate top rail and the rail splits, or the whole frame racks out of square. Rail repair runs $140-$380, depending on the damage and whether we’re sistering a new wood rail or welding steel into the frame. Show me the gate closing on its own, and I’ll show you where the rail is failing.
Custom Welding
Plenty of Pinehurst gates are ornamental iron, built before modern bracket systems existed. When those rails crack, you don’t need a new gate. You need a welder who can work on site, while the gate stays on its post. Our custom welding work runs $240-$600 for typical repairs, including cracked rails, broken hinge barrels, and frame squaring on wood-and-steel hybrid gates. We weld in the driveway, not in a shop forty minutes away. The gate never leaves your property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinehurst
We’re certified to service nine major gate brands, and in Pinehurst we see a lot of older Linear, Viking, and DoorKing operators still running on original boards. Parts for those legacy units are still out there, and we keep the common ones on the truck. Ghost Controls retrofit kits are a frequent fix for homeowners who want modern safety features without replacing a solid physical gate. If you’re running one of these brands in the 01866 area, we can likely get parts the same week and install them without a second trip across the county.
Common Gate Parts & Welding Problems We See in Pinehurst Homes
- Frost-heaved hinge posts. The clay under Pinehurst expands and heaves through every freeze-thaw cycle, and posts pop loose or lean out of plumb. This shows up as a gate that drags every March and April, even if the hinges themselves are new.
- Split or racked wood frames after snow and ice. Heavy wet snow loads down gate panels, and when ice sits on a top rail for a month, the wood splits along the grain. We carry framing stock and cross-bracing hardware on every Pinehurst call because storm-drop damage here is more common than in open suburban towns.
- Corroded original hardware. Those mid-century capes and colonials have gates that were hung in the 1960s and 1970s. The original hinges, latches, and drop rods are often rusted through or sized for a gate that weighed half as much when the wood was dry.
- Legacy operators with failing control boards. A 1990s DoorKing or Viking board that keeps tripping the breaker is a common call in this area. Sometimes a cap or relay gets it running. Sometimes the honest answer is that a Ghost Controls retrofit is cheaper than nursing a board that isn’t long for this world.
Pricing for Gate Parts & Welding in Pinehurst, MA
Here’s what you can expect in the 01866 market. Hinge replacement runs $145-$320. Post replacement and footing work runs $380-$900 per post, depending on whether we’re resetting into existing concrete or pouring a new, deeper footing. Rail repair runs $140-$380. Custom welding runs $240-$600. Those ranges reflect what we quote and write down before work starts, and that number is the number.
We also keep standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a straight price.
We Also Serve Cities Near Pinehurst
We work throughout the Pinehurst area and the towns around it, including Burlington, Billerica, Wilmington, and Bedford. Same crew, same pricing, same 90-Day Done Right Promise. If you’re a few minutes over the town line, you’re still a local call to us, not a regional project.
Serving Pinehurst, MA - Our Local Coverage Area
We’re based in the Pinehurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pinehurst
Because in Pinehurst, the problem is usually the post, not the hinge. The glacially deposited clay under your yard absorbs water, freezes, and heaves, pushing hinge posts sideways or lifting them out of their footings. If you replace hinges without resetting the post in a deeper, properly braced footing, you’ll fix it again next spring. Call (877) 610-2993 and we’ll check the post before we sell you a hinge.
Yes. We weld on site while the gate stays on its post. For most cracked rails and broken hinge barrels in Pinehurst, that’s a $240-$600 job done in your driveway the same visit. No hauling, no shop detour, no city-run scheduling delay.
Sometimes yes, sometimes no. A simple capacitor or relay fix can get another few years out of an old DoorKing, and that work starts around $180. But if the board has burned traces or you’re on the third repair in two winters, a Ghost Controls retrofit is usually the smarter money. We’ll tell you which one we’d choose if it were our gate.
In most Pinehurst cases, it can be repaired. We sister a new rail beside the split one, square the frame back, and add cross-bracing so the next nor’easter doesn’t repeat the damage. Rail repair runs $140-$380. Full replacement only makes sense when the frame itself is rotted end to end. Call (877) 610-2993 for a free estimate.
We do. Pinehurst lots are modest, and a lot of gates sit close to asphalt driveways and fence lines. We dig by hand where needed, brace the fence while the post comes out, and restore the area when the new post is set. The goal is a post that holds for decades, not a yard that looks like a construction site until July.
Call Gatewood Fence & Gate for Gate Parts & Welding in Pinehurst
If your Pinehurst gate is sagging, split, or running on a board that belongs in a museum, call (877) 610-2993. A live person answers, the estimate is free, and the price we write down is the price you pay. We’ve been owner-operated since 2001, and the 90-Day Done Right Promise is in writing on every job. Hal Gatewood’s name is on the shop, and the shop is still just a phone call away.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pinehurst since 2001.