Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pelican Bay
Gate parts and welding in Pelican Bay works a little differently than anywhere else in Naples. Nearly every property here sits behind two gates: the community perimeter, then the estate, villa-cluster, or condo-tower gate. When a hinge post corrodes or a weld cracks, you’re not just fixing a gate. You’re maintaining a piece of infrastructure that has to pass Pelican Bay Foundation architectural review. That’s the first thing we account for on every service call. Hal Gatewood and the crew at Gate Parts & Welding have worked inside Pelican Bay long enough to know the approval process, the salt-air failure patterns, and the tight rights-of-way along shared driveways off Pelican Bay Boulevard. If your gate is sagging, seizing, or welded wrong, call (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is Pelican Bay’s Preferred Gate Parts & Welding Company
Hal Gatewood has owned and operated this shop since 2001. The name is on the door, the invoice, and the truck. That’s the whole point. When a villa-cluster gate off Gulf Park Drive fails, we send someone who knows Pelican Bay, not a rotating crew that has never seen a Clam Bay salt-crust on an aluminum frame. We weld on site. We don’t haul your gate to a shop in another county and leave your driveway open for a week. We fix the hinge post, re-weld the cracked rail, and reset the operator right where it stands.
Every job carries the 90-Day Done Right Promise in writing. If the weld fails or the roller binds again, one call brings Hal back. No runaround, no arguing about whose fault it is. Pelican Bay customers also get a free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. That’s not a coupon book. Those are standing offers because Hal would rather do honest work at a fair price than haggle at the door.
Our Gate Parts & Welding Services in Pelican Bay
Hinge Replacement
A sagging gate in Pelican Bay is almost always a hinge post problem, not a panel problem. Gulf-front towers and the villa clusters west of Tamiami Trail sit close enough to the water that hinge posts corrode within two to three years. We cut out the old hinge, weld in a reinforced replacement, and re-hang the gate so it swings true. If the post itself is rotted at the base, we address that before it drops the gate onto the footing.
Post Replacement
Driveway gates in Pelican Bay neighborhoods like Bay Colony and the condo rows along Gulf Shore Boulevard put enormous load on their posts. Salt air, storm debris, and years of wind loading from summer squalls will eventually split or rust a post. We dig out the failed post, set a properly sized replacement with concrete cured for the load, and re-weld the hinge brackets in place. The gate stays aligned because the foundation is right.
Rail Repair
Slide gates are common in Pelican Bay because shared driveways and narrow rights-of-way often leave no room for a swing gate to arc. When a slide gate loses a roller or jumps its rail on a shared villa-cluster easement, it can block the only vehicle access for several homes. We jack the gate back onto the rail, replace the roller or re-weld the rack and pinion track, and get the driveway moving again. This is the work we do most often in October and November when snowbird owners return.
Custom Welding
Pelican Bay’s Mediterranean-style estates and ornamental aluminum gates rarely have off-the-shelf hardware. Custom welding covers cracked frames, broken scrollwork, failed bracket welds, and gates that were never fabricated quite right. We weld on site, in the driveway, with the gate still on its post. When a cracked ornamental aluminum frame needs repair, we match the alloy, re-weld the joint, and dress it smooth so the Pelican Bay Foundation inspector sees a repair that belongs there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelican Bay
We service Viking, Ghost Controls, and DoorKing operators and hardware regularly across Pelican Bay. Many of the telephone entry and card reader systems on gated villas and condo towers here run on these brands, and we stock the boards, rollers, and hinge sets that fail most often. That means fewer return trips and less waiting on parts shipped from a warehouse. If your access control system ties into a Viking or DoorKing board, we test the low-voltage side and the mechanical side together because a gate that closes on its own is a gate that’s failing somewhere.
Common Gate Parts & Welding Problems We See in Pelican Bay Homes
- Salt-corroded hinge posts on Gulf-facing properties. The salt-laden air off the Gulf and Clam Bay gets into hinge barrels and post bases. Within two to three years, a swing gate starts sagging, and that sag eventually snaps welds or drops the gate.
- Summer lightning surges killing operator boards. Pelican Bay sits through some serious lightning. LiftMaster, FAAC, and DoorKing control boards and loop detectors get fried, and owners coming back in October find a dead operator and a gate stuck half open.
- Slide gates jumping the rail on shared driveways. Villa clusters along Pelican Bay Boulevard often have one shared driveway with a slide gate and not much room to work. When a roller wears out or a rack section rusts through, the gate binds and blocks the only access for a whole cluster of homes.
- Pedestrian gates that won’t latch after a storm. Underground garage roll-up and pedestrian gates on the high-rise condos take a beating during hurricane season. Strike plates shift, lock bodies rust, and the gate no longer stays shut, which is a security problem as much as a mechanical one.
Pricing for Gate Parts & Welding in Pelican Bay, FL
A typical hinge replacement on a single swing gate in Pelican Bay runs $220 to $480 depending on post condition and gate weight. Rail repair on a slide gate usually lands between $300 and $700 when we’re re-welding a rack section and replacing rollers. Custom welding jobs, like cracked ornamental aluminum frames or broken scrollwork, start around $180 for a small repair and go up to $1,200 or more for extensive structural re-fabrication on a large estate gate. Post replacement runs from $600 to $1,800 when excavation and concrete work are included. Every price is quoted and agreed before work starts, in writing. You’ll never get a bill that’s bigger than the number we shook hands on. Call (877) 610-2993 for a free estimate with no trip charge inside the county.
We Also Serve Cities Near Pelican Bay
Our Gate Parts & Welding in Pelican Bay service area extends to Naples Park, Naples, Golden Gate, and East Naples. The same crew, the same 90-Day Done Right Promise, and the same on-site welding. If you’re a few miles outside the community, call (877) 610-2993 and we’ll schedule you the same week.
Serving Pelican Bay, FL - Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pelican Bay
Yes, in most cases. Pelican Bay is a master-planned, gated community, and virtually every gate on the property sits behind the community perimeter. The Pelican Bay Foundation requires architectural review before any significant hardware, operator, or finish change, and that includes hinge replacement and structural welding. We help you submit the right documentation and use materials that meet the Foundation’s standards, so your repair doesn’t get flagged during inspection. Call (877) 610-2993 and we’ll walk you through what’s needed for your specific villa cluster or tower.
Salt-laden air off the Gulf of Mexico and the Clam Bay mangrove estuary accelerates corrosion on operator housings, lock bodies, and hinge hardware. Properties on the western residential towers facing the water can see significant oxidation within two to three years of installation. Add six months of humidity while the unit sits unoccupied, and the operator seizes. We re-grease, replace corroded internals, and seal the housing. When a snowbird leaves for the summer, we can pre-treat the gate so it doesn’t freeze up by the time you fly back.
We can, and that’s how we do almost all of our custom welding in Pelican Bay. We unbolt the gate from its hinges just enough to access the crack, clean the aluminum, re-weld the joint, and dress it smooth. The gate never leaves your property. We keep the pedestrian keypad or card reader live during the work so access doesn’t stop, and the weld is built to survive the salt air rather than just look pretty for one season.
The gate usually binds against the track and blocks the only vehicle access for a cluster of villas. On a shared driveway off Pelican Bay Boulevard, that’s an emergency. We jack the gate back onto the rail, inspect the rollers and the rack and pinion, replace whatever failed, and re-weld the track so it holds alignment. Because these easements are tight, we keep the pedestrian entry and safety photocells live during the job and set a temporary swing gate so cars can keep moving. One call to (877) 610-2993, and we’re on it.
The sag is in the hinge post, not the panel. Fix the panel without the post and you’ll fix it twice. In Pelican Bay, hinge posts on Gulf-facing properties corrode fast, and once the post shifts even a quarter inch, the gate drops and the panel welds get stressed all over again. We find the failing post, replace or sleeve it, re-weld the hinge brackets, and only then re-hang the gate. The 90-Day Done Right Promise covers the whole job, including the post.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelican Bay with on-site welding and gate repair since he founded the company in 2001.