Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Parma Heights
Gate parts and welding in Parma Heights comes down to one thing most national companies won’t tell you: the gate is only as good as the post holding it. In Parma Heights, where the original chain-link gates from the 1950s and 60s were set in shallow, hand-mixed concrete, that post is usually the problem. We fix it correctly, in your driveway, without hauling your gate to some shop across town. Call (877) 610-2993 and a live person answers, day or night. Hal Gatewood has been at this since 2001, and the name on the shop is the name on every invoice.
Why Gatewood Fence & Gate Is Parma Heights’s Preferred Gate Parts & Welding Company
We are the company Parma Heights homeowners call when another outfit quoted one price on the phone and a bigger one at the door. That doesn’t happen with us. The price we quote is the price you pay, agreed before any work starts, in writing. Hal Gatewood’s shop has a published address and license number anyone can look up. You can drive to the shop and look him in the eye. That’s the oldest accountability there is.
Our Gate Parts & Welding crew works Parma Heights every week. We know the ranches off Pearl Road, the Capes tucked behind the library, the long driveways south of York Road. When you call, you get a background-checked, uniformed person who knows the difference between a hinge bracket that needs welding and a post that needs pulling. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We also answer the phone with a live person, 24/7. Not a voicemail, not a dispatch queue three states away, not a chatbot. You call, Hal or one of his crew picks up. That matters at 7 a.m. on a Wednesday when your gate won’t close and your dog is eyeing the street.
Our Gate Parts & Welding Services in Parma Heights
Hinge Replacement
Parma Heights chain-link gates lean because the hinge post leans, not because the hinge is tired. We’ve pulled posts where the footing was only 14 inches deep and heaved nearly three inches after decades of freeze-thaw cycles. Replacing the hinge on a heaving post is a band-aid. We set the post right, then weld or bolt new hinges onto solid metal. A typical hinge replacement in Parma Heights runs $140-$260 per gate when the post is still sound. If the post has moved, expect to address that too.
Post Replacement
This is the big one in Parma Heights. The median home here was built between 1948 and 1968, and virtually every property got a galvanized chain-link fence at construction. Those original posts were set 12 to 18 inches deep, far above the 36-inch frost line. Cleveland averages more than 40 freeze-thaw events per winter. Each one heaves that shallow footing a little more. By March, the latch side of the gate is dragging on the ground. Full post replacement on a standard Parma Heights residential gate typically runs $350-$650, including digging past the frost line, new concrete, and a galvanized post. We don’t reuse the old hole. We dig it right.
Rail Repair
Decades of lake-effect snow and road salt do a number on the rails and tension bands on Parma Heights gates. Rails corrode, bands snap, and the gate starts to rack. We repair or replace rails on site, and we carry the fittings that match the older galvanized spec, not whatever the box store has on the shelf. Rail repair on a standard walk gate runs $90-$180. On a wider driveway gate, expect $180-$320.
Custom Welding
We weld on site. That means your gate stays in your driveway, not strapped to a trailer headed to a shop. Cracked hinge brackets, snapped post caps, broken latch tabs, a slide gate roller bracket that tore off its mount, all of that gets welded in place. Custom welding jobs in Parma Heights typically run $120-$300 depending on how much fabrication is involved. Hal has been welding since before most of these gates were even considered old. If it’s metal, he can make it hold again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parma Heights
We service and stock parts for the operators Parma Heights homeowners actually have bolted to their gates. That includes Ghost Controls, Viking, and DoorKing operators, along with a full shelf of hinges, rollers, latch assemblies, and track brackets. If your slide gate has a seized Viking roller or a DoorKing operator that’s been fighting a wide acreage gate it was never sized for, we know the fix because we see it every week. We keep common parts in the truck, so most repairs in Parma Heights are done same day, first trip. We’re certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Common Gate Parts & Welding Problems We See in Parma Heights Homes
- Post heave from freeze-thaw cycles. Shallow footings set in the 1950s heave two to four inches every winter, bending hinge posts and dropping the latch side to the ground. The fix is pulling the post, re-digging past 36 inches, and repacking with fresh concrete before any hardware work makes sense.
- Corroded rollers and track brackets seizing slide gates. Years of lake-effect snow and salt spray eat through original hardware, and the gate starts grinding or binds mid-travel. We cut off the seized bracket, weld on a new one, and replace the roller set in the same visit.
- Wide driveway gates overloading the rack and pinion. On acreage lots around Parma Heights, the gate operator was often sized for a narrower suburban gate. A 16-foot gate with a homeowner-grade operator will strip the rack or burn the gearbox in two seasons. We size the operator to the actual gate weight and span, not the marketing copy.
- Latch and lock failures on original gates. The original drop rod or fork latch that came with the fence is now 60-70 years old. The parts are worn, the alignment is gone, and no amount of shimming brings it back. We replace the latch, not the whole gate.
Pricing for Gate Parts & Welding in Parma Heights, OH
Here’s what Parma Heights homeowners can expect, stated plainly:
- Hinge replacement: $140-$260 per gate
- Post replacement (residential): $350-$650 per post
- Rail repair: $90-$320 depending on gate width
- Custom welding: $120-$300 per job
- Gate rollers and track bracket replacement: $150-$400
- Latch and lock replacement: $80-$220
The price is quoted before any work starts, in writing, and it doesn’t change at the door. We don’t do that. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
One thing worth knowing: In Parma Heights, a low price on a gate repair often means the contractor is only changing the part, not the post. We pulled an Eisenhower-era hinge post on a ranch off Pearl Road after the gate latch had dropped below the drop rod. The post footing was only 14 inches deep and heaved nearly three inches. Our crew re-dug to 40 inches, set a new 2-3/8 inch galvanized post in fresh concrete, installed a new LiftMaster swing gate operator with a safety photocell, and added a keypad entry for the long driveway. That’s the repair done right. The cheap fix would have sagged again by next spring.
We Also Serve Cities Near Parma Heights
Beyond Parma Heights, our crews regularly work in Parma Heights and the surrounding communities, including Parma, Middleburg Heights, Brooklyn, and Independence. If you’re just over the line, call us. The no-trip-charge policy applies inside the county, and Hal schedules the work himself.
Serving Parma Heights, OH - Our Local Coverage Area
We’re based in the Parma Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Parma Heights
Your gate’s hinge post is set in a shallow concrete footing that sits above the 36-inch frost line. Each of Cleveland’s 40-plus annual freeze-thaw cycles heaves the footing up, then drops it back down, but not to the same place. The post leans a little more every year, and the latch side dips toward the ground. The actual fix is pulling the post, digging the hole past the frost line, and repacking it with fresh concrete. In Parma Heights, we see this on nearly every original gate from the 1950s and 60s. Call (877) 610-2993 and we’ll dig it right this time.
Yes, if the post itself is still plumb and solid. We grind off the old bracket, weld a new one in place, and hit it with a zinc-rich cold galvanizing spray so the joint doesn’t rust out. But if the post has heaved or started to lean, welding a bracket onto it just puts good hardware on a failing foundation. We’ll tell you honestly which one you’re dealing with. Estimates are free.
A heavyweight slide or swing operator sized for the actual gate weight and length. On Parma Heights acreage properties with 14- to 20-foot gates, that usually means a Viking or DoorKing operator in the commercial-duty class, not a retail homeowner unit. We calculate the gate weight, wind load, and duty cycle, then match the operator to the task. Guessing wrong strips the rack or burns the gearbox. We’d rather do it once, right.
Yes. We install solar-powered gate operators with battery backup for Parma Heights driveways where running line voltage isn’t practical or affordable. Ghost Controls and Viking both make solar-ready units that handle cold Ohio winters when paired with the right panel and battery bank. We handle the post, the gate, the operator, the safety edges, and the power setup. One crew, one job, one price, agreed before we start.
The post under the latch side has heaved out of its shallow footing over the winter. Adjusting the hinges or shimming the latch is a temporary patch that fails again next thaw. The real fix is pulling the post, re-digging the hole past the 36-inch frost line, setting a new galvanized post in fresh concrete, and then re-hanging the gate so everything lines up. In Parma Heights, this is the single most common gate repair we do every March and April. Call (877) 610-2993 and Hal will quote it straight.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Parma Heights since 2001.