Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Parlier
Gate repair in Parlier isn’t the same job it is in Fresno or Clovis. Around here, a gate has to survive harvest season. Gonola trucks, forklifts, vineyard tractors, and loaded trailers put a beating on hinge posts and gate frames that suburban neighborhoods never see. We know the difference, and we build and repair for it.
If your gate is sagging, dragging, or torn loose at the post, we’ll come out, look it over, and tell you straight what needs fixing and what doesn’t. No part-swapping for the sake of a bigger invoice. Call (877) 610-2993 and a live person answers, day or night. That’s how we’ve run Gatewood Fence & Gate since 2001.
Why Gatewood Fence & Gate Is Parlier’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That’s not a marketing line. It means when a post gets re-welded wrong or a hinge replacement fails, you know exactly who to call, and you won’t get a runaround. We’ve been owner-operated from day one, and the 90-Day Done Right Promise is stamped in writing on every job we do in Parlier.
We carry parts for Linear, Viking, Ghost Controls, and DoorKing operators, so we’re not ordering from a catalog while your gate sits open. Most hinge, latch, and roller replacements happen same-visit because the truck is stocked. Parlier sits inside our service area, so there’s no trip charge anywhere in the county. You’ll get a background-checked, uniformed person at your door, not a subcontractor we’ve never met.
The farms and ranches off Manning Avenue and South Zediker Avenue have the same gate failures we’ve been fixing for 29 years. Somebody clips a post during harvest. The Tule fog eats a hinge bolt. A rail weld cracks in July heat. None of it is exotic to us. It’s the weekly routine for our Gate Parts & Welding team.
Our Gate Parts & Welding Services in Parlier
Hinge Replacement
Parlier gates fail at the hinge first. The combination of clay soil shifting under the post and agricultural traffic leaning on the gate means hinge barrels stretch, pins bend, and welds crack from fatigue. We replace hinges with heavier weld-on or bolt-on units sized for the gate’s actual load, not whatever the hardware store had on the shelf. When we do a hinge replacement on a ranch gate near Parlier, we check the post while we’re at it, because a new hinge on a leaning post is a repair you’ll do twice.
Post Replacement
The gate posts around Parlier take a beating that city posts don’t. Irrigation water softens the clay, the clay lets go of the post, and a loaded trailer bumps the gate and knocks everything off plumb. We dig out the old footing, set the new post deeper than the original, and weld or bolt the gate back square. It’s the only way to stop the sag-and-clip cycle. We do post replacement on chain-link perimeters and tubular steel estate gates all through the 93648 zip code.
Rail Repair
Top and bottom rails crack at the welds, usually at the center brace or where the rail meets the hinge stile. We weld on-site, so the gate never leaves your property. If the rail is too far gone for a sound weld, we’ll tell you that too, and we’ll show you the split before we recommend a section replacement. That’s the repair-first approach Hal built the company on.
Custom Welding
Sometimes the part you need doesn’t exist in a catalog. An odd gate opening on a 1960s ranch-style property, a corral gate that needs a taller frame, a solar operator mount that has to fit around existing farm hardware. We fabricate and weld it to fit, on-site, and it carries the same 90-Day Done Right Promise as a standard repair. Custom welding is one of the most common calls we get from Parlier, because the older agricultural properties around town were built before standard gate kits existed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parlier
We’re certified to service nine major gate brands, and around Parlier we see a lot of Linear and Ghost Controls operators on farm gates, plus older Viking and DoorKing units on the small commercial properties near Manning Avenue. We keep common boards, remotes, photocells, and receiver parts for these brands on the truck, so a no-power call doesn’t mean a two-week wait. If you’ve got an operator that’s been on the gate for fifteen years and still runs the original arm, bring it up when you call. We’d rather repair it than replace it.
Common Gate Parts & Welding Problems We See in Parlier Homes
– Post lean after harvest traffic. Gondola trucks and tractors clip gate posts during the July-October harvest, and clay-heavy soil doesn’t hold a shallow footing. Once a post leans, the gate binds, drags, or won’t latch.
– Tule fog corrosion on hinges and latches. From November through February, gates in Parlier stay wet for weeks. Hinge bolts rust in place, latch mechanisms seize, and chain-link tension hardware corrodes faster than the dry summer months would suggest.
– Weld cracks at stress points from heat cycling. Summer days over 105°F expand steel, and the cool valley nights contract it. Over years, that cycle cracks welds at the hinge stile and center brace, especially on older tubular gates.
– Sag from worn rollers and rails. Slide gates on acreage properties wear rollers flat and grooves into the rail. Parlier’s dusty, sandy soil accelerates that wear, and the gate starts shuddering before it binds completely.
Pricing for Gate Parts & Welding in Parlier, CA
We Also Serve Cities Near Parlier
We cover Parlier and the surrounding farm communities: Selma, Reedley, Kingsburg, and Fowler. Same crew, same truck, same written promise. If your gate is down and you’re between towns, call and we’ll get you scheduled.
Serving Parlier, CA - Our Local Coverage Area
We’re based in the Parlier area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Parlier
Why do gate posts in Parlier shift more after harvest season?
Because the clay-heavy soils around Parlier soften with irrigation, and the July-to-October grape and stone-fruit harvest puts hundreds of additional heavy vehicle passes on private driveways that are normally quiet. A gondola truck or loaded tractor that clips a gate post in soft clay knocks it off plumb quickly, and a shallow original footing makes it worse. The fix is a deeper post setting with a wider concrete collar. Call (877) 610-2993 if your gate is binding after harvest, and we’ll come set it right.
Can you weld a solar gate opener onto my existing farm gate?
Yes, and we do it regularly around Parlier. Solar openers are a common choice for the rural and acreage gates east and south of town where running mains power to the gate would cost more than the operator itself. We weld or bolt the operator mount to your existing gate frame, set the solar panel for maximum winter sun, and wire the battery and control board. We’ll also check that your gate swings freely before we put the operator under load, because a stiff hinge will burn out a new opener in a season.
What should I do if my gate sags after a tractor clips the hinge post?
Stop using the gate and call us. A clipped hinge post means the post footing has likely cracked, and every opening puts more stress on the remaining hinges and the operator. We’ll dig out the old footing, reset the post with concrete, and weld or replace the damaged hinge. We see this exact failure on Parlier properties every harvest, and we can usually have it swinging square the same day we arrive. Call (877) 610-2993 and we’ll tell you what time to expect us.
How does Tule fog affect my chain-link gate’s hinges and latches?
Tule fog leaves moisture on your gate for weeks at a stretch from November through February, and chain-link hardware rusts faster than you’d expect in a valley that gets under 12 inches of rain a year. Hinge bolts seize, tension bands corrode, and latch pins freeze. When we replace hinges or latches in Parlier, we use corrosion-resistant hardware and grease the pivot points, which matters more here than in a drier climate.
Do I need entrapment protection on my automatic gate operator in Parlier?
Yes. Entrapment protection isn’t optional on automatic gate operators, and on a working Parlier property it matters even more because kids, dogs, and workers are all moving around the gate during harvest. That means monitored photocells, a properly set reverse mechanism, and warning signage. If you’ve got an older operator without working safety edges or photocells, we can add them and bring the system up to current code. We’ll check the entrapment devices on every automatic gate we service in Parlier.
Call Gatewood Fence & Gate for Gate Parts & Welding in Parlier
If your gate is sagging, cracked, or knocked off its post, call (877) 610-2993. A live person answers, we’ll set a time that works for you, and Hal or one of his crew will show up with a stocked truck and a straight answer. You’ll get a written price before any work starts, and every job carries the 90-Day Done Right Promise. If it’s not done right, we make it right. That’s how we’ve done it since 2001, and that’s how we do it in Parlier.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Parlier since 2001.