Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Orrville
Gate parts and welding in Orrville, OH typically runs $160-$2,400 depending on whether we’re resetting a heaved hinge post, welding a cracked frame rail, or replacing worn gate rollers. Most hinge and post repairs around Orrville are completed same-day or next-day, and we answer the phone live around the clock at (877) 610-2993. The price is quoted and agreed before any work starts, so the number you hear is the number you pay.
Orrville is not a simple suburb. The work here moves from automated industrial gates near Smucker’s to gravel farm lanes where a manual tube-steel gate has to keep swinging for another twenty years. We handle both ends of that range, and we weld on site so the gate never leaves your property.
Why Gatewood Fence & Gate Is Orrville’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and still runs it himself. His name is on the shop, his address is published, and the person who shows up in Orrville is someone you can find again at the hardware store. We fix what other companies want to replace. If a hinge post heaved out of plumb, we reset it. If a weld cracked, we weld it. We don’t sell you a new gate when the old one has ten years left in it.
Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back, no runaround. That’s not a marketing line. It’s stamped on every invoice we hand to an Orrville customer.
We serve the whole 44667 zip code, from in-town lots near Orr Park out to the farm lanes off North Crown Hill Road and the township roads running toward the Holmes County line. A live person answers the phone 24/7, not a voicemail, not a call center. When your gate is down and the cows are out or the driveway is blocked, that matters.
Our Gate Parts & Welding Services in Orrville
Hinge Replacement
Weld-on strap hinges and barrel hinges on Orrville farm gates take a beating from freeze-thaw cycles and heavy lake-effect snow. We cut off the old hinges, grind the post clean, and weld new ones in place, on site. The gate stays in your driveway. If the post itself has moved, we address that before hanging the panel, because a new hinge on a leaning post still sags.
Post Replacement
Frost heave is the biggest gate killer in Orrville. Timber posts pushed out of plumb by winter ground movement will keep sagging a gate no matter how many times you shim the hinges. We dig out the old footing, pour a proper concrete base below frost depth where practical, and set the post square. Then we re-hang the gate and adjust the latch so it closes cleanly. This is structural work, and it’s the foundation of everything else.
Rail Repair
Tube-steel gate frames crack at the weld points, especially on Orrville farms where a gate gets opened twice a day in every kind of weather. We cut out the cracked section, weld in new steel, and reinforce the joint so it holds. We also straighten bent top and bottom rails on slide gates that have been hit by a truck or dragged through packed ice.
Custom Welding
Sometimes you need a gate that doesn’t exist in a catalog. A narrower side-yard gate for an Orrville home with a shared driveway. A taller farm gate for livestock. A removable section for field access. We weld custom gates on site, measure and build to your opening, and make sure the hardware matches the use. No motor, no keypad, just steel that fits the spot.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orrville
We’re certified to service Linear, Viking, Ghost Controls, and DoorKing operators, plus five other major brands. For Orrville customers that means we show up with the right parts and the right service knowledge, whether it’s a Viking arm operator on a Smucker’s-area entrance or a Ghost Controls slide motor on a rural driveway. We stock common gate rollers, hinges, latch hardware, and operator parts locally, so turnaround in Orrville is fast.
Common Gate Parts & Welding Problems We See in Orrville Homes
- Heaved hinge posts on farm lanes. Orrville sits in the lake-effect snow corridor, and the deep freeze-thaw cycles push timber posts out of plumb. A gate that scraped the ground in March was often perfectly square in October, and the post is the problem, not the panel.
- Slide gates jammed by packed snow and ice. Heavy, wet snow builds up in slide-gate tracks and racks around Orrville. The gate fails before power is even applied. We clear the track, check the rollers and rail, and adjust the operator limits.
- Worn gate rollers on tight in-town lots. Many Orrville homes with narrow side yards use slide gates because a swing gate would hit a wall or a post. Worn rollers stop the gate mid-travel, and the fix is usually a roller replacement and rail straightening, not a new motor.
- Cracked welds on farm gates opened daily. Tube-steel gates on Orrville farms get worked hard. Weld points crack from years of opening and closing. We weld them on site and reinforce the joint so it doesn’t crack again next season.
Pricing for Gate Parts & Welding in Orrville, OH
Here’s what you can expect in Orrville’s market. Hinge replacement on a single farm gate typically runs $180-$420, including cutting off the old hinges and welding on new ones. Post replacement, which includes digging out the old footing, pouring new concrete, and re-hanging the gate, usually falls between $600 and $1,400 depending on post size and access. Rail repair and straightening on a tube-steel gate runs $200-$650. Custom welding work, like building a gate to fit an odd opening or adding a pedestrian pass-through, typically ranges from $450 to $2,400 depending on size and steel.
Every quote is written and agreed before we start. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Orrville
Our Gate Parts & Welding team takes care of gate work across Wayne County and the surrounding area. We’re in Orrville regularly, and we also cover Rittman, Wooster, Canal Fulton, and New Franklin. Same live phone line, same 90-Day Done Right Promise, same person answering when you call.
Serving Orrville, OH - Our Local Coverage Area
We’re based in the Orrville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Orrville
The post moved, not the gate. Frost heave in Orrville’s clay-heavy soil pushes timber hinge posts out of plumb during freeze-thaw cycles, and a post that’s two or three inches off square will make a perfectly straight tube-steel gate scrape the ground by late winter. The fix is resetting the post footing and re-hanging the gate, not replacing hinges that were never the problem. Call (877) 610-2993 and we’ll come look at the post, not just the panel.
Yes, that’s a common call in Orrville’s older in-town lots, where side yards are narrow and a swing gate would hit a post or wall. We replace worn gate rollers, straighten bent rails, and repair cracked welds on the frame, often without removing the gate from its track. The tight space is exactly why slide gates are the right call here. Call (877) 610-2993 for a free estimate.
Yes, and we do it regularly around Orrville. A gate on an Amish farm needs to stay manual, so we focus on the structure: resetting the hinge post, welding new strap hinges, straightening the frame, and setting the latch. No electronics, no motor, no solar controller. That’s a different skill set from automated gate work, and we know the difference. Call (877) 610-2993 and tell us what kind of gate you have.
Probably not. In Orrville, heavy wet lake-effect snow packs into slide-gate tracks and racks, which jams the gate before the operator ever gets a chance to work. The motor usually trips because it’s fighting packed ice or a bent rail, not because it failed. We clear the track, inspect the rollers and rail, and test the operator before recommending any motor work. Call (877) 610-2993 and we’ll diagnose it on site.
We brace the gate on temporary supports while we dig out the old footing, set the new post, and pour concrete. In most cases we can have the gate swinging on the new post within the same day. Concrete takes days to reach full strength, so we brace accordingly and give you clear instructions on when heavy use is safe. Your driveway keeps working. Call (877) 610-2993 and we’ll walk you through the plan before we dig.
Call Gatewood Fence & Gate for Gate Parts & Welding in Orrville
If your gate sags, scrapes, jams, or won’t latch, call (877) 610-2993 and talk to a live person. We’ll give you a free estimate, quote the price before any work starts, and stand behind the job with our 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the work is done in your driveway. That’s the way it’s been since 2001, and that’s the way it stays.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Orrville since 2001.