Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Orangevale
Gate parts and welding work in Orangevale tends to be heavier than what you’d find in neighboring suburbs. We’re talking 16-foot tube-steel ranch gates, drop-rod latches on corral panels, and hinge posts that have been sitting in Sacramento Valley clay since the Eisenhower administration. At Gatewood Fence & Gate, we repair all of it. On-site welding keeps your gate in your driveway, and you get a straight quote before any torch gets lit. If you need someone in Orangevale today, call (877) 610-2993.
We serve the 95662 zip code and every street off Hazel, Pershing, and Greenback. The work we do here isn’t the ornamental scrollwork you see in Fair Oaks. It’s structural.
Why Gatewood Fence & Gate Is Orangevale’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name has been on the invoices since day one. Orangevale homeowners call us because the person who answers the phone is actually the person who can tell you whether a cracked top rail can be welded or needs replacing. A live person answers around the clock, not a voicemail tree. When you call about a sagging gate off Pershing Avenue, you get a straight answer about what’s likely wrong and what it’ll cost to fix.
Our Gate Parts & Welding team has spent years learning what Orangevale’s older ranch properties throw at us. Homes built in the 1950s through the 1970s on half-acre to multi-acre lots carry original hardware that’s been through decades of 100-degree summers and wet winters. We know those gates. We know which post footings have heaved, which operators lack modern safety photocells, and which hinges are about to let go. That’s not something a generic gate company learns from a manual.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No runaround. There’s also no trip charge anywhere inside the county, and seniors and veterans get a permanent 10% discount. That’s how it works when the name is on the shop and the shop is down the road.
Our Gate Parts & Welding Services in Orangevale
Hinge Replacement
Orangevale’s dry summer heat seizes unlubricated hinges, and winter rain on clay soil pushes posts out of alignment. That combination does a number on gate hinges. We stock heavy-duty ball-bearing hinges sized for wide residential driveway gates and the tube-steel gates used on equestrian properties throughout the 95662 zip. If your gate drags or the latch no longer catches, hinges are usually where we start.
Post Replacement
Around Orangevale, the failure is almost always below ground. Clay-heavy soil swells with winter rain, heaves the footing, and throws an otherwise straight gate out of square. Replacing a post means more than setting a new one in concrete. We re-plumb the gate, check the reveal, and often re-weld the hinge mount so the gate hangs true again. On large-lot properties with multiple gate points, one bad post can affect two or three gates.
Rail Repair
Wooden ranch gates from Orangevale’s original post-WWII homes tend to splinter at the hinge mounts. The top rail cracks, the pickets loosen, and eventually the whole gate sags. We weld steel stiffeners or replace rotted rails on site. For tube-steel gates, a cracked rail is usually a straightforward weld repair, though we’ll tell you honestly if the steel is too thin from rust to hold a bead.
Custom Welding
This is where Orangevale horse-country work separates from tracts a few miles west. Heavy 16-foot-plus ranch gates, agricultural drop-rod latches, custom mounts for gate operators on pipe frames: that’s our bread and butter. We weld on site, so your gate doesn’t leave the property. Whether it’s a cracked corral gate or a driveway gate that needs an operator bracket fabricated, Hal’s crew handles it without hauling anything off to a shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orangevale
We’re certified to work on a long list of gate operator brands, including FAAC, BFT, and Linear. Older Orangevale properties often have legacy units from the 1990s still wired in, and many of them predate modern UL 325 entrapment protection. We stock common replacement parts for those older units and can usually get anything else within a day or two. If the board is obsolete and no longer manufactured, we’ll tell you that straight and give you options for a retrofit that works with your existing gate and posts.
Common Gate Parts & Welding Problems We See in Orangevale Homes
- Sagging gates from post heave. Orangevale’s clay soil expands when wet and contracts when dry. Each wet winter pushes post footings slightly. Each dry summer settles them back, but rarely to the same spot. After enough cycles, the gate sags and the latch misses.
- Cracked welds on tube-steel gates. Wide ranch gates flex every time they open and close. Over years, that flexing work-hardens the steel at the hinge joints until a bead cracks. A cracked weld on a 16-foot gate puts enormous strain on the operator too.
- Dry rot at hinge mounts on wood gates. Gates built in the 1950s and 1960s were often hung with lag bolts into untreated wood. Orangevale’s summer heat dries that wood until it splits, and then the hinges pull loose. Re-bolting into the same holes doesn’t last. We repair or replace the rail itself.
- Legacy operators with failed safety photocells. Many older Orangevale gates still run on operators from the 1990s. Their photo-eyes misalign after years of heat and post movement, and the gate reverses or won’t close. We re-align, replace, or retrofit depending on what’s actually wrong. Never bypassed. That’s a safety hazard and against the law.
We got called to a 1950s ranch property off Pershing Avenue where the original swing gate had sagged so badly the latch no longer caught. The hinge post had heaved in the clay soil, and the gate operator’s safety photocell was misaligned from years of warping. We replaced the post footing, welded a cracked top rail, and re-hung the gate with new heavy-duty hinges before re-aligning the LiftMaster operator’s photo-eyes so the gate would close without reversing. That’s a standard Orangevale call for us.
Pricing for Gate Parts & Welding in Orangevale, CA
A typical hinge replacement on a standard driveway gate in Orangevale runs $185-$320. Post replacement, including digging out the old footing and setting the new post in concrete, is usually $340-$650 depending on whether we’re doing one post or a pair. Custom welding jobs like cracked rail repairs land between $150-$400, with heavier tube-steel corral gates on the upper end. If you need a legacy operator retrofitted with modern safety gear, expect $425-$900 including parts and labor.
The price you get quoted is the price you’ll pay. We write it down before any work starts, and the 90-Day Done Right Promise is on the same page. Repair over $200 automatically gets $40 off, and there’s no trip charge anywhere inside the county. Call (877) 610-2993 and we’ll get you a free estimate over the phone or in person.
We Also Serve Cities Near Orangevale
If you’re just over the line in Gate Parts & Welding in Orangevale, we probably already know your street. We also cover Fair Oaks, Citrus Heights, Folsom, and Granite Bay regularly. The truck makes the loop often enough that we can usually drop by the same day or the next morning for a look.
Serving Orangevale, CA - Our Local Coverage Area
We’re based in the Orangevale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Orangevale
In Orangevale, the problem is almost always below the hinges. Our clay-heavy soil swells with winter rain, and that pushes post footings out of true. Replacing hinges without fixing the post is like fixing a door without touching the frame. We re-set the post footing and then re-hang the gate so it stays plumb through the next wet season. Call (877) 610-2993 for a free look at your gate.
Usually we can weld it in place, and that’s almost always cheaper than replacing a 16-foot gate. The answer depends on how much good steel is left around the crack. If the tube is rusted thin, the weld won’t hold, and we’ll tell you that straight. Most cracked corral gates in the 95662 zip have plenty of good steel left; we grind, weld, and get you back in business on site.
No. Bypassing a safety photocell defeats the entrapment protection required under UL 325, and it’s genuinely dangerous. A misaligned or failing photo-eye is usually a simple fix: we re-align it, replace the sensor if needed, or retrofit a modern safety kit onto the existing operator. We’ll never bypass a safety device just to get a gate closing faster. Call (877) 610-2993 and we’ll get it working safely.
Often yes. Orangevale’s county zoning permits equestrian use on many residential lots, so gates here tend to be heavier 16-foot-plus tube-steel and pipe frames rather than the ornamental iron you see west of Hazel. That means heavier hinges, larger posts, and drop-rod latches built for daily horse traffic. It’s a different hardware profile entirely, and it’s why we stock agricultural-grade parts for Orangevale customers specifically.
Most of the time we can park a solar opener on the existing gate without replacing the rack. It depends on how square the gate rolls, the condition of the wheels and track, and whether the old rack teeth are worn enough to skip. We’ll assess it on site, give you a written price for what it actually needs, and never sell you a new rack if yours is fine. Estimates are free: (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Orangevale and Sacramento County since 2001.