Gate Parts & Welding in Ojus - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Ojus

Gate parts and welding in Ojus usually means one of two things: a gate that sags because a hinge or post gave out, or a gate that stopped opening because a motor mount or rail cracked. Both get worse fast in this climate. We stock the common hinges, rollers, latches, and weld-on brackets that Ojus gates need, and we carry the steel to fix posts and rails on site instead of hauling your gate to some shop across the county. If your gate is struggling, call (877) 610-2993 and Hal or one of his crew will pick up.

Call (877) 610-2993

We’ve been welding and repairing gates since 2001, and we know what Ojus throws at a gate: salt air off the Intracoastal, hurricane wind loads, and older hardware that was undersized from the day it was bolted on. That’s why we start with the post and the hinge, not the pretty part in the middle. A gate sags in the hinge post, not in the middle – and that is where we start.

Why Gatewood Fence & Gate Is Ojus’s Preferred Gate Parts & Welding Company

Hal Gatewood’s name is on the shop and on every invoice we hand you. We’re locally owned and owner-operated, founded in 2001, with a published address and license number anyone can look up. That matters in Ojus because so many homeowners here have already been burned by a national outfit that quoted one number on the phone and charged another at the door. We quote the price before the first cut or weld, and that price is the price. Every job carries our Gate Parts & Welding team’s 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.

Ojus homeowners also deal with a wrinkle most people don’t expect: their gate permit doesn’t go to a city hall. Because Ojus sits in unincorporated Miami-Dade County, gate repairs that need a permit run through Miami-Dade’s Building and Neighborhood Compliance department under the High Velocity Hurricane Zone code. We’ve pulled enough of those permits to know what the county wants to see before they sign off. That local knowledge keeps your repair moving instead of stalling in a plan-review queue.

And when you call us, a live person answers. Not a voicemail, not a chatbot, not a call center three states away. Around the clock, seven days a week. Most Ojus calls get a same-day or next-day visit, depending on the problem and the weather.

Our Gate Parts & Welding Services in Ojus

We do the work in your driveway. Hal’s crew rolls up with a welder, a saw, and the right steel. Here’s what that looks like for the jobs Ojus calls us about most.

Hinge Replacement

In Ojus, cast steel hinges and weld-on hinge barrels corrode fast. Salt-laden air from the Intracoastal, just a few blocks east of most homes here, oxidizes the metal within three to five years. You’ll see the gate start to drag on the latch side or hear it groan when it swings. We cut off the old hinge, weld a new one, and set the gate so it hangs square. Hinge replacement in Ojus typically runs $180 to $340 per hinge, depending on gate weight and how much of the mounting plate is still sound. If the plate is gone, we talk about the post before we talk about anything else.

Post Replacement

This is the big one for Ojus’s older homes. Many of the swing gates on the 1950s to 1970s ranch houses near N. Miami Avenue and along the streets east of NE 8th Avenue sit on steel posts that were set decades ago, before anyone thought about 175 mph wind loads or year-round salt spray. We dig out the old footing, set a new steel post in concrete, and weld or bolt the gate back on. Post replacement in Ojus generally runs $550 to $1,100 for a residential swing gate post, including the concrete and haul-away. On a 1970s ranch home off N. Miami Avenue, our crew found a sagging aluminum swing gate where the hinge post had corroded through at the base from salt-laden air. We replaced the post with a new steel footing, cut out the rotted bottom rail, and re-welded the hinge mounts, then upgraded the operator to a LiftMaster with a new loop detector and safety photocells to meet current entrapment protection.

Rail Repair

HVHZ wind loads on wide driveway gates bend top rails and crack weld joints that were sized for pre-Andrew standards. On sliding gates, we see bottom rails that crack where the roller carriage bolts on, and top rails that bow after a storm pushes the gate sideways. We straighten what’s sound and cut out and re-weld what isn’t. Rail repair in Ojus typically runs $220 to $520 depending on how much rail has to be replaced and whether we’re working with steel or aluminum. A cracked rail won’t fix itself, and a bent one gets worse with every cycle.

Custom Welding

Sometimes the part that broke isn’t a part you can order. A bracket that held a motor mount. A latch tab on a hand-built iron gate. A hinge that was welded by somebody who’s long since retired. We fabricate and weld these on site. Custom welding in Ojus runs $140 to $420 for most residential repairs, including the steel and the labor. Hal has been welding since 2001 and he takes a particular satisfaction in fixing the corners and brackets that other companies want to replace with a whole new gate. Fix the panel without the post and you’ll fix it twice – so we fix it once, the way it should have been built.

Trusted Brands We Service in Ojus

We’re certified to service nine major gate brands, including DoorKing, Ghost Controls, and Viking. That means when an Ojus gate motor or opener control board fails, we can usually get the correct replacement part the same week, and often the same day from our local suppliers. We also stock common solar panel leads and backup battery harnesses for the long-driveway gates that rely on off-grid power. If your operator is a brand we don’t list, call anyway. A lot of the time the issue is the mount or the wiring, not the motor itself.

Common Gate Parts & Welding Problems We See in Ojus Homes

• Hinge posts corroded through at the base. Salt air from the Intracoastal works on steel posts year-round, and the worst damage is always at ground level, where moisture sits. We see this on original 1960s and 1970s swing gates all over Ojus.
• Top rails bent from hurricane wind loads. HVHZ wind doesn’t push a wide gate; it racks it. Pre-1993 hardware wasn’t sized for that, and the top rail is the first thing to bend or crack at the weld.
• Solar openers failing after storms. Long driveways off N. Miami Avenue and closer to the water often run solar operators because pulling mains power that far isn’t practical. After a hurricane, panel output drops and the operator cycles poorly or not at all.
• Rollers and wheels worn to the axle. Sliding gates in Ojus, especially at the mid-rise condo communities closer to the Intracoastal, see heavy daily use. Worn rollers put strain on the motor and chew up the rail until something gives.

Pricing for Gate Parts & Welding in Ojus, FL

We Also Serve Cities Near Ojus

While this page is for Ojus homeowners, our crews also cover North Miami Beach, Sunny Isles Beach, Aventura, and Hallandale Beach. If you’re reading this from one of those communities, the same pricing, the same 90-Day Done Right Promise, and the same live-answer phone line apply. You’ll get Hal or someone from his crew, not a subcontractor from an app.

FAQs - Gate Parts & Welding in Ojus