Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Novi
Gate parts and welding in Novi almost always come down to one thing: fixing what’s broken instead of replacing what isn’t. We’re Gatewood Fence & Gate, and Hal Gatewood has been cutting, welding, and re-hanging gates since 2001. A busted hinge, a frost-heaved post, a cracked weld on an ornamental swing gate…we handle it on site, usually in one visit, with the gate never leaving your property. If you’re anywhere in Novi, from the subdivisions off Beck Road to the neighborhoods near Twelve Mile, call (877) 610-2993 and a real person answers, day or night.
Why Gatewood Fence & Gate Is Novi’s Preferred Gate Parts & Welding Company
Novi isn’t a place where you can get away with sloppy gate work. The neighborhoods here are built around HOA entry gates, decorative driveway gates, and the kind of ornamental aluminum and steel that shows every crooked weld. We’ve repaired enough of them to know what holds up and what doesn’t. Our 90-Day Done Right Promise is on every invoice in writing. If a weld cracks or a hinge sags inside ninety days, one call brings Hal back. No runaround, no arguing.
We also answer the phone. That sounds small, but when your HOA gate is stuck half-open at 11 p.m. and the property manager is calling, a voicemail doesn’t help. A live person picks up at (877) 610-2993, around the clock. And the service call comes from people who know Novi’s gate history: the 1990s build-out, the clay soil, the way a frost cycle can push a post an inch out of plumb between March and April.
Our Gate Parts & Welding Services in Novi
Hinge Replacement
Hinge failure is the most common gate problem we see in Novi, and it’s rarely just the hinge. A gate sags in the hinge post, not in the middle – and that’s where we start. We replace worn pins, reinforced brackets, and weld-grade hinges on ornamental aluminum and steel gates throughout the 48374 and 48377 ZIP codes. If the post shifted, we correct that first, because a new hinge on a leaning post fails the same way the old one did.
Post Replacement
Novi’s clay-heavy soil and Michigan’s freeze-thaw cycles do a number on gate posts. A post that moved half an inch last winter will bind the gate by summer and crack the hinge welds by fall. We dig out the old footing, set a new post deeper than the original, and often use a sonotube to isolate the concrete from the surrounding clay. Then we weld the hinge brackets back on and re-hang the gate plumb.
Rail Repair
Aluminum and steel rails crack at the weld points, especially on longer HOA entry gates that get real daily use. We cut out the damaged section, weld in a matching replacement, and grind the join flush so it doesn’t show. For ornamental gates with scrollwork or decorative finials, we match the existing pattern so the repair blends in. A rail repair done right should look original, not patched.
Custom Welding
Some gates can’t be ordered out of a catalog. Tall driveway gates, curved-top entry gates, or a custom gate that has to work with existing intercom and camera mounts need someone who welds on site and understands how the whole system moves together. We fabricate brackets, extend posts, build custom hinge assemblies, and reinforce weak points. On Novi’s higher-end properties, the gate is the first thing you see – it shouldn’t look like an aftermarket repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Novi
We service and repair gate hardware across eight major brands, and in Novi we see a lot of Linear, Viking, Ghost Controls, and DoorKing operators on residential and HOA property. The brand matters less than the way it was installed and maintained. We stock common hinge pins, brackets, roller assemblies, and latch hardware for these systems, which means most parts and welding jobs in Novi get finished same day rather than waiting on a shipped part. If your operator brand is one we don’t regularly carry parts for, Hal will tell you that upfront instead of promising a timeline we can’t keep.
Common Gate Parts & Welding Problems We See in Novi Homes
- Frost-heaved posts on clay soil. Oakland County’s clay holds water, and Michigan’s 50-plus annual freeze-thaw cycles push concrete footings up and sideways. That’s why so many Novi swing gates need post work every spring – the gate didn’t change, the ground under it did.
- Hinge post cracks from sagging gates. When a heavy ornamental gate sags, the hinge post takes the load. We regularly see hairline cracks spreading from the hinge bracket on gates in Novi’s 1990s-era subdivisions. Fix the panel without the post and you’ll fix it twice.
- Underground wiring failures. Low-voltage lines to gate operators sit in the same shifting clay. Water gets into the conduit during the wet months, then freezes and cracks the insulation. The gate motor still has power, but the loop detector, keypad, or photo eyes stop working.
- Proprietary HOA control codes. A Novi-specific headache: subdivision entry gates installed by now-defunct 1990s developers were often programmed with proprietary access codes never handed to the HOA. When the control board dies, the association finds out there’s no documentation – and the only fix is a full board and keypad replacement even though the gate mechanically still works.
Pricing for Gate Parts & Welding in Novi, MI
We quote every Novi job upfront and in writing before any work starts. Hinge replacement on a residential ornamental gate in Novi typically runs $220 to $480, depending on whether the post needs re-setting at the same time. Post replacement, including digging out the old footing and pouring a deeper one, runs $600 to $1,100 for most single-post jobs. Custom welding work runs $120 to $220 per hour plus materials, and a typical bracket repair or weld reinforcement lands between $180 and $450. Rail repairs on ornamental aluminum run $250 to $550 depending on length and pattern-matching. Every quote is the number you pay. We don’t run a trip charge anywhere inside Oakland County, and the 90-Day Done Right Promise covers the work – not the fine print.
We Also Serve Cities Near Novi
If you’re in Northville, Wixom, Walled Lake, or Farmington, our crew covers those communities with the same on-site welding and parts service. Scheduling is coordinated from our Detroit office, but the person who shows up knows the local gate patterns. Learn more about our Gate Parts & Welding capabilities and Gate Parts & Welding in Novi service area.
Serving Novi, MI - Our Local Coverage Area
We’re based in the Novi area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Novi
Because the hinge post has moved, not the hinge. Novi’s clay soil heaves each winter, and a post that’s drifted even half an inch puts the entire gate load on one hinge point. The hinge looks fine, but it’s being twisted and sheared every time the gate swings. We find that also explains most recurring hinge failures we see in Novi’s 1990s and 2000s subdivisions. The fix is re-setting the post and welding on a reinforced hinge bracket – not just bolting on another hinge. Call (877) 610-2993 and we’ll inspect the post while we’re there.
Yes. We weld and shape aluminum scrollwork on site to match the existing pattern, including radius bends, finial ends, and decorative collars. Aluminum welds cleanly, and we finish the repair so it matches the rest of the gate’s patina. For HOA entry gates in Novi, we can also verify you’ve got the approval you need before we start, because most of those gates are HOA-owned and on a shared maintenance agreement. Give us a call at (877) 610-2993 and we’ll come take a look.
Sometimes yes. If the rack gear has broken welds or has shifted out of alignment, the gate binds as the pinion climbs over the rack teeth. Groaning usually means the operator is working against a misaligned gate; the jumping is the rack getting caught. We re-weld the rack in place, align the rollers and the pinion, and make sure the operator isn’t fighting a gate that’s out of level. You can reach us at (877) 610-2993, and we’ll come out and look.
We treat it as a full replacement, not a patch. If the original installer is gone, the gate’s documentation usually is too – we’ve seen Novi HOAs with no record of post depth, footing type, or even who manufactured the gate. We dig out the old post, set a new one deeper than the original with a sonotube-isolated footing, and weld the hinge brackets on fresh. That’s the permanent fix, and it’s fully covered by the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate.
We do. Custom driveway gates in Novi – especially the tall ornamental ones with intercoms and cameras mounted on the posts – need to be framed and welded so the electronics stay stable, which means a strong post and bracketry. We build and weld the gate structure around your existing intercom, camera placement, and opener hardware, running any needed reinforcement where the mounts attach. Every custom job starts with a free site visit and a written quote. Call (877) 610-2993 and tell us what you’re working with.
Why Novi’s Clay and HOA Gate History Means You Need the Right Repair
Here’s the thing about Novi that most gate repair shops don’t think about: the ground under the gate is just as important as the gate itself. Oakland County’s clay-heavy soil expands and contracts through Michigan’s annual freeze-thaw cycles, and a gate post set too shallow or without proper isolation will shift within a few winters. That’s why so many subdivision gates here end up out of plumb by spring – not because the gate was bad, but because the footing wasn’t built for this soil. We also run into a uniquely Novi problem on the HOA side: many of the entry gates installed in the 1990s by developers who are now long gone came with proprietary access codes nobody thought to hand to the HOA. When a control board finally fails – and a lot of them are reaching that age this decade – the association discovers there’s no documentation. The gate itself may be mechanically sound, but without board access codes, the only workable repair is a full board and keypad replacement. That’s a painful discovery, and it happens regularly in Novi. On a subdivision entry gate off Twelve Mile a while back, an Apollo swing gate had sagged so far the safety photocells were blocked, which stalled the operator mid-cycle. We cut out the frost-heaved hinge post, poured a deeper post footing with a sonotube to isolate it from the surrounding clay, welded on a reinforced hinge bracket, and re-hung the gate so the loop detector and keypad entry worked again without false trips. That’s the kind of repair that lasts, and it’s what we do every week across Novi’s 48374, 48375, 48376, and 48377 ZIP codes.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, providing gate parts and welding across Novi since 2001.