Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Versailles
Gate parts and welding in North Versailles usually come down to one of two problems: a hinge or post that has failed on an old ornamental iron gate, or a gate that drags on a sloped driveway because nobody accounted for the grade when it was hung. We fix both, on site, without hauling your gate to a shop you’ll never see. Hal Gatewood has been repairing gates since 2001, and the crew that shows up in North Versailles carries the parts, the welder, and the know-how to get it right the first trip. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is North Versailles’s Preferred Gate Parts & Welding Company
North Versailles homeowners tend to recognize sloppy work when they see it. A lot of the gates we get called out to fix in the township were installed decades ago, and somebody along the way patched them instead of repairing them properly. That is exactly the kind of work Hal will not leave behind. When we replace a hinge post in North Versailles, we set it in concrete below the frost line, because we know what Allegheny County clay does to a shallow footing. When we weld a rail, we repair the frame so it actually holds, not just so it looks fine for a month.
We are locally owned and owner-operated, with a published address and a license number anyone can look up. Hal’s name is on the shop and on every invoice. Every job we do in North Versailles carries the 90-Day Done Right Promise in writing: if it’s not done right, we make it right. No fine print, no runaround. The same person you talk to on the phone is the person who stands behind the work.
Our calls are answered by a live person 24 hours a day, seven days a week. Not a voicemail, not a queue. You call, a human picks up. And we come to North Versailles with background-checked, uniformed techs who have seen just about every gate failure the Mon Valley’s weather and hillsides can produce.
Our Gate Parts & Welding Services in North Versailles
Hinge Replacement
On North Versailles hillsides, hinge replacement is rarely just swapping a pin. The original builders often hung gates on sloped concrete aprons without building uphill-clearance into the hinge geometry. Within a few seasons, the gate drags, the hinge pins bend, and the panel starts tearing at the bottom rail. We replace hinges with heavy-duty adjustable models and set the hang so the gate swings free, even on a grade. For a standard ornamental iron driveway gate in North Versailles, hinge replacement typically runs $140-$320 depending on the weight of the panel and how far the post has moved.
Post Replacement
A sagging gate in North Versailles usually means a hinge post has shifted, not that the panel failed. Clay-heavy soil and the Pittsburgh area’s freeze-thaw cycle heave posts out of plumb every winter. We dig out the old footing, set a new post below the frost line with proper concrete, and weld or bolt the existing gate back onto a post that will actually stay put. Post replacement on a residential driveway gate in North Versailles generally runs $280-$650, including concrete and re-securing the panel.
Rail Repair
Those 50-to-70-year-old ornamental iron gates around North Versailles are beautiful until the bottom rail rusts through from decades of wet winters and Mon Valley air. We cut out the rotted section, weld in new steel matched to the original profile, and grind and paint the repair so it disappears into the frame. Rail repair runs $120-$380 depending on how much of the rail has to be replaced and whether we need to reinforce the frame behind it.
Custom Welding
Sometimes the part you need does not exist anymore. A 1960s gate hinge bracket, a custom roller mount for a slide gate, an ornamental finial knocked off by a snowplow. Our Gate Parts & Welding crew welds on site, in your driveway, so the repair matches the original work instead of looking like an afterthought. Custom welding jobs in North Versailles typically run $90-$250 for a small fabrication, more for larger structural repairs. We quote the price before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Versailles
We keep parts on the truck for the gate operators and hardware North Versailles homeowners actually use: FAAC operators on older European-style driveway gates, BFT and Linear swing and slide operators, and Viking heavy-duty systems on wider residential and light commercial entrances. We are certified to service nine major brands, and when a part is not on the truck, we can usually have it in hand within a day or two. The goal is one trip, not a standing appointment.
Common Gate Parts & Welding Problems We See in North Versailles Homes
- Gates dragging on sloped concrete aprons. The original installer hung the gate level on flat ground, but the apron sloped away from the post. Within two or three North Versailles winters, the hinge pins wear oval, the bottom rail bends, and the gate binds on the high side. The fix is re-hanging the panel with uphill-clearance, not grinding down the bottom rail.
- Frost heave throwing posts out of plumb. Clay-heavy Allegheny County soil freezes and thaws repeatedly each winter. A post set shallow will move. Every spring we get calls from homeowners along Greensburg Pike and the hillside cul-de-sacs whose latch no longer lines up because the post moved a half-inch toward the street.
- Rusted-out bottom rails on 50-plus-year-old iron gates. North Versailles was built for steel-industry workers between the late 1940s and the 1970s. Those original ornamental iron driveway gates are now 50 to 70 years old. Decades of wet winters and residual Mon Valley air quality have eaten through bottom rails and hinge brackets until the panel sags under its own weight.
- Chain-link gates sagging in the middle on hillside lots. A chain-link gate on a slope loads the hinge post unevenly. The middle rail kinks, the fabric stretches, and the latch no longer catches. We fix the post, replace the rail, and re-tension the fabric so the gate hangs true.
Pricing for Gate Parts & Welding in North Versailles, PA
Here are honest numbers for North Versailles work. Hinge replacement runs $140-$320. Post replacement, with concrete and resetting the gate, runs $280-$650. Rail repair runs $120-$380. Custom welding jobs run $90-$250 for small fabrications. Gate roller replacement for slide gates runs $80-$220. What moves the number is the weight of the gate, how much of the frame has to be reconstructed, and how badly the post has moved. The price is quoted and agreed before any work starts. You will not get a different number at the door. We offer $40 off any repair over $200, no trip charge inside the county, free second opinions on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near North Versailles
Gatewood Fence & Gate covers North Versailles and the surrounding Allegheny County communities. We regularly work in Duquesne, Forest Hills, Turtle Creek, and McKeesport. If you live in one of those towns and need gate parts, welding, or a full repair, the same crew and the same 90-Day Done Right Promise apply. Call us and we will put you on the schedule.
Serving North Versailles, PA - Our Local Coverage Area
We’re based in the North Versailles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in North Versailles
Your gate drags because the hinge geometry was not set up for the slope of your driveway. On the steeper residential streets off Greensburg Pike and the hillside cul-de-sacs throughout the township, swing gates installed on sloped concrete aprons drag and bind within a few seasons because the uphill side of the panel closes against the apron while the downhill side swings free. The permanent fix is re-hanging the gate with uphill-clearance built into the hinge so the panel has room to swing over the high point, plus replacing hinge pins that have already worn oval from the strain. Call (877) 610-2993 and we will take a look at your gate and give you a straight answer and a written price.
Yes, in most cases we can replace just the hinge post and save the original gate panel. The process is digging out the old footing, setting a new post below the frost line, and welding or bolting the existing gate back onto the new post with fresh hinges. A post that has heaved or rusted out at the base does not mean the rest of the gate is scrap. We have done this many times on North Versailles properties, including a rusted swing gate on a hillside cul-de-sac where the original 1960s hinge post had shifted and the panel dragged on the concrete apron. Our crew set a new post footing, installed heavy-duty adjustable hinges with sag correction, and welded a new bottom rail to match the old ornamental frame. Call (877) 610-2993 to schedule a free look.
Yes. Any automatic gate in North Versailles that is being repaired or having parts replaced needs functioning entrapment protection – photo eyes, safety edges, and a properly set clutch or current-sensing reverse – because a gate that closes on a person, a child, or a pet is a serious safety issue. This is not a paperwork detail; it’s what keeps a 300-pound moving panel from becoming a real problem. We inspect and, if needed, install entrapment protection as part of any automatic gate repair. Nobody should be leaving a gate operator without it. Call (877) 610-2993 if your gate’s safety edges or photo eyes are worn out and need replacing.
A chain-link gate sags in the middle because the hinge post was undersized or set too shallow for the slope, and the fabric has stretched over years of the panel hanging slightly out of square. On a hillside, the gate loads the top hinge constantly instead of sharing the weight evenly. The middle rail kinks, and the gate starts to ladder. The fix is resetting or replacing the hinge post, installing a new top and middle rail, and re-tensioning the chain-link fabric. We can also add a tension wire and a proper gate frame if the old one was run without them. Call (877) 610-2993 for a free estimate.
Yes. If your slide gate roller is seized and the manufacturer no longer makes that part, we can fabricate a replacement roller on site and weld it into the existing carriage. This is common on older North Versailles slide gates where the original rollers have rusted solid from years of wet winters. We match the roller diameter and bearing surface to the track, weld the new assembly in, and get the gate sliding again without replacing the whole system. Custom roller fabrication and welding runs $90-$250, and you will have the price in writing before we start. Call (877) 610-2993 if your slide gate is sticking or grinding.
If the gate on your North Versailles property is dragging, sagging, rusting through, or just not latching, call (877) 610-2993. A live person answers, we will set a time that works for you, and the person who shows up will actually fix it. Free estimates, honest pricing, and a written guarantee on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Versailles since 2001.