Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Scituate
Gate parts and welding in North Scituate usually come down to one question: can the gate be repaired in place, or does the whole thing need to be hauled off and replaced? For most coastal gates around here, the answer is repair, on site, by someone who knows what salt air does to a hinge. We’re Gatewood Fence & Gate, and we’ve been welding and rebuilding gate hardware along the South Shore since 2001. Hal Gatewood still runs the crew himself, the phone rings to a live person, and we show up in North Scituate when we say we will. Call (877) 610-2993 for an on-site look and an honest price before anything gets touched.
North Scituate sits right on the Atlantic, more exposed than almost anywhere else in Plymouth County. That changes everything about gate hardware: hinges, latches, posts, welds. We’ll get into the specifics below, but the short version is that marine-grade parts and smart reinforcement are not an upsell here. They’re the difference between a gate that holds square through a nor’easter and one that rips out of the post in a single 60 mph gust.
Why Gatewood Fence & Gate Is North Scituate’s Preferred Gate Parts & Welding Company
We don’t advertise much. Most of our work in North Scituate comes from neighbors telling neighbors, because when a gate fails after a storm, the first call usually goes to whoever fixed the house next door last winter. Hal’s name is on the shop, his address is published, and he’s been doing this since 2001. That’s the oldest accountability there is: you know where to find the person who did the work.
Every job carries our 90-Day Done Right Promise in writing. If the hinge we welded or the post we reset fails inside ninety days, one call brings us back. No runaround, no fine print. On top of that, we answer the phone with a live person around the clock. Not a voicemail system, not a call center in another state. You call, a person picks up, and that person can tell you when we’ll be in North Scituate.
For residents along Gannett Road, the Driftway, or the side streets off First Cliff, response time matters. We coordinate dispatch from our Boston office and keep crews servicing North Scituate locally, so we’re typically on site within a day for non-emergency work and faster when a gate is hanging by one hinge and the dog is in the yard. A gate that won’t close isn’t just an inconvenience. It’s a security and safety problem, and we treat it like one.
Our Gate Parts & Welding Services in North Scituate
Post Replacement
This is the most common job we do in North Scituate, and honestly, it’s where we fix what other companies miss. A gate sags in the hinge post, not in the middle. If the post is rotted or rusted at the ground line, no hinge replacement in the world will hold. We remove the old post, probe the footing, and set a marine-grade replacement in high-strength concrete. On waterfront lots near the harbor, salt-laden groundwater wicks up through the footing and rots the post from the inside while the above-grade wood still looks solid. We check below grade before we quote anything.
Hinge Replacement
Salt air on the exposed Atlantic coastline eats standard zinc-plated hinges within two seasons. They bind, they squeak, and eventually the gate tears loose from rotted wood around the lag screws. In North Scituate, we replace hinges with stainless or hot-dipped galvanized hardware sized for the weight of the gate, then weld or through-bolt them so they hold through the next nor’easter. A hinge that’s simply screwed into soft coastal wood will fail again. We won’t install one that way.
Rail Repair
When a solid wood gate takes a 60 mph wind load, the frame twists. Rails pull loose from the pickets, joints open up, and the gate goes out of square. We weld steel frame rails where it makes sense, or rebuild wood rails with structural fasteners that won’t work loose. If the gate’s worth saving, we’ll tell you. If it’s not, we’ll tell you that too. Hal would rather lose a job than stand behind a repair he doesn’t believe in.
Custom Welding
Some North Scituate gates need parts that don’t come out of a catalog. Hinge brackets with odd offsets, a steel frame to stiffen a sagging gate, a custom latch plate, a repair to a bent gate frame. We weld on site, in your driveway. The gate stays in North Scituate, the work is done in front of you, and we don’t haul anything off to a shop unless it truly can’t be fixed where it sits. For marine exposure, we use stainless or properly treated steel and weld it like it’s going to live on the coast, because it does.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Scituate
If your gate has a Viking, Ghost Controls, DoorKing, or Elite operator, we service it. Hal is certified on nine major gate brands, and we keep common parts on the truck so we’re not driving back to a supply house mid-job. But a brand name doesn’t tell us what the salt air has already done to the wiring, the limit switches, or the safety edges. We diagnose the whole gate, not just the name on the motor.
Common Gate Parts & Welding Problems We See in North Scituate Homes
- Torn-out hinges after a nor’easter: Wind load on a solid wood infill gate bends the hinge post and rips lag screws straight out of salt-rotted wood. After a February storm, we see gates hanging by one hinge all along the Driftway and the side streets off Country Way. The fix is a new hinge post and through-bolted stainless hardware, not bigger lag screws.
- Post bases rotted from the inside: Salt-laden groundwater near the harbor seeps up through concrete footings and eats the post at the ground line. The above-grade wood often looks fine. We probe below grade on every post replacement in North Scituate because that’s where the failure actually starts.
- Corroded latches and locks: Zinc-plated hardware lasts two seasons in salt air before it seizes. Gates that are only used occasionally may not fail until the latch has completely rusted shut. We replace coastal gate hardware with stainless models rated for marine exposure.
- Binding after every storm: Freeze-thaw cycles heave concrete footings on saturated coastal lots, throwing automated slide gates out of square. The rack and pinion strips, or the gate binds on the rail. The root cause is almost always the footing, not the operator. We fix the footing first, then align the operator to it.
Pricing for Gate Parts & Welding in North Scituate, MA
A hinge replacement on a typical North Scituate swing gate runs $180-$340, including hardware and the labor to square the gate afterward. A single post replacement runs $320-$600 depending on whether we’re digging a rotted footing out of saturated ground or starting fresh. Custom welding and bracket fabrication runs $150-$450 per job depending on the size of the repair. Full gate rebuilds or welded steel frame conversions typically land between $800 and $2,200, and that includes strapping and re-hanging the gate. Every price is quoted and agreed before we touch anything. No surprises at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near North Scituate
If you live outside North Scituate, we cover the surrounding South Shore: Cohasset, Scituate, Norwell, and Hingham. Our Gate Parts & Welding service area extends along the coast and inland, and the same salt-air and storm-load expertise applies. If your gate is failing and you’re within a short drive of North Scituate, call us and we’ll get it on the schedule.
Serving North Scituate, MA - Our Local Coverage Area
We’re based in the North Scituate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Scituate
Most operators have a pull-lever or keyed release on the powerhead that disengages the drive gear so you can push the gate by hand. Don’t force it, and don’t pull the release while the gate is in motion. If you’re not sure where the release is on your specific model, call (877) 610-2993 and we’ll walk you through it. After the power comes back, be sure the release is re-engaged before running the motor again. A gate that runs while disengaged can strip the gear assembly. If you need us to come out and check it, we’re in North Scituate regularly.
The post was rotted at the ground line, below where anyone could see it. Salt-laden groundwater around North Scituate wicks up through concrete footings and eats the wood from the inside, so a post that looks solid above grade can have the structural integrity of a sponge where the hinge load concentrates. When the next 60 mph gust hits, the lag screws pull straight out. That’s why we probe below grade on every hinge replacement and post repair here. It’s the only way to know what you’re actually working with.
A solid wood gate has a huge wind load, and around North Scituate that wind load is the whole ballgame. A well-built wood gate with through-bolted hardware and a properly set post can survive, but after one or two majors, the frame usually starts to twist. A welded steel frame with wood infill gives you the same look with far less deflection, and it moves the failure point away from the hinges and rails. We do this conversion often along the waterfront streets. It’s not the only option, but it’s the one that holds.
Stainless steel, welded with stainless rod, and then passivated or left to form its oxide layer. The point of welding coastal gate hardware isn’t just strength. It’s eliminating the galvanic corrosion you get when plain steel hardware sits against salt-soaked wood or zinc-coated brackets. We also through-bolt rather than relying on lag screws whenever the post condition allows. For most residential gates in North Scituate, a welded stainless hinge bracket on a sound post will outlast the gate itself.
Most of the time, it’s the post footing. Freeze-thaw cycles on saturated coastal lots heave the concrete, and the gate goes out of square. The rack and pinion then strips because it’s trying to drive a gate that no longer travels straight. If you just replace the rack, the next heave will strip the new one. We check the footing first, re-set it if needed, then align the operator. That’s the repair that lasts. Call (877) 610-2993 for a free assessment. We’ll come out, probe it, and tell you what’s actually wrong.
Get Your Gate Fixed Right in North Scituate
If your gate is sagging, binding, or hanging by one hinge after the last storm, don’t wait for the next one. We’ll come look at it, tell you what’s wrong, and quote you a price before anything gets touched. No trip charge inside the county, a written 90-Day Done Right Promise on every job, and Hal Gatewood’s name on the invoice. Call (877) 610-2993 for a free estimate and get it fixed right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Scituate and the surrounding South Shore since 2001.