Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Haven
Gate parts and welding in North Haven usually means one of two things: a gate that won’t swing, or a gate that swings too much. If you’re off State Route 5, Dixwell Avenue, or any of the side streets running through the Quinnipiac valley, we can be at your place quickly to look at it. We’ve been fixing gates since 2001, and Hal Gatewood’s name is still on the shop. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is North Haven’s Preferred Gate Parts & Welding Company
The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Hal Gatewood started this company in 2001 and still runs it owner-operated today. Our phone number is listed, our address is published, and our license number is one anyone can look up. We don’t hide behind a dispatch queue.
North Haven homeowners call us because they want a face they’ll see again at the hardware store. They want someone who will show up when he said he would. We carry a strong local reputation built one gate at a time. Every job comes with our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back, no runaround.
We answer our phone 24/7. A live person, not a chatbot, not a call center three states away. When a gate post heaves out of plumb in February and the gate won’t close, we pick up on the first ring.
Our Gate Parts & Welding Services in North Haven
We repair what other companies want to replace. That’s our whole approach. We weld on site in your driveway, fix the actual problem, and leave your gate where it belongs. Here’s what we do most often around North Haven:
Hinge Replacement
North Haven’s clay soil makes hinge posts move. When the post shifts, the hinge takes the load it was never meant to carry. We replace bent and broken hinges, weld on reinforced hinge plates, and set the post right so the hinge isn’t fighting the soil every spring. A gate sags in the hinge post, not in the middle, and that is where we start.
Post Replacement
If you live along the Quinnipiac River valley, your gate posts sit in clay that expands and contracts through every freeze-thaw cycle. We cut out rotted footings, pour deeper posts with wider bases, and rehang your gate so it stops shifting. This is the most common repair we handle in North Haven, and the one where a shortcut shows up again by next spring.
Rail Repair
Bent top rails, broken welds on the rail joints, torn picket attachments. On chain-link gates along the Route 5 corridor, the rails take a beating from daily use. We straighten what’s straightenable and replace what isn’t. If the rail is compromised from years of salt and moisture, we’ll tell you honestly.
Custom Welding
When a hinge ear snaps clean off or a frame cracks at the corner weld, we weld it back on site. No hauling the gate to some shop across the state. We match the metal, reinforce the weak point, and grind it smooth. This is where Hal’s 29 years in the trade shows. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Haven
We service FAAC, BFT, Linear, Viking, and other major gate operators. Because we’re local to the North Haven area, we keep common parts on hand and can source the rest fast. A 1990s FAAC hydraulic operator on a driveway gate off Dixwell Avenue? We know those units. An old BFT board that’s never been updated? We can often retrofit it. If a replacement part is no longer manufactured, we’ll tell you that straight and give you honest options. No pressure to replace a whole system when a board swap or a rebuilt hinge gets it running.
Common Gate Parts & Welding Problems We See in North Haven Homes
- Hinge posts heaving out of plumb every spring. The Quinnipiac valley’s clay soil freezes, thaws, and moves. A post that was plumb in October can be four inches out by March. This re-opens the same weld cracks year after year if the footing wasn’t improved.
- Corroded rollers and rack teeth on slide gates. Road salt from Route 5 and humidity from the river eat through factory coatings. High-cycle commercial gates in the Washington Avenue corridor flatten rollers fast. We see it weekly.
- Obsolete control boards on 1990s operators. Winter storm power blips kill old boards. Many are no longer manufactured, which means a full operator swap or a custom retrofit. We’ll show you both prices and let you decide.
- Rotted wood posts and corroded hardware on 1970s-era privacy gates. North Haven’s mid-century ranches and colonials had a lot of wood perimeter gates installed during the suburban boom. Forty to sixty years later, the posts rot at ground level and the hinges fail. The gate looks fine; the post is the problem.
Pricing for Gate Parts & Welding in North Haven, CT
A hinge replacement in North Haven typically runs $185-$340, depending on the size of the gate and how far the post has moved. Post replacement with a new concrete footing and rehanging the gate runs $450-$900 in this area. Custom welding to repair a cracked frame or snapped hinge ear usually falls between $150-$400, depending on what has to come off and how much reinforcing is needed. Rail repair and straightening typically sits in the $120-$300 range.
You’ll get a written price before any work starts. That price is the price. No surprises at the door. We also offer $40 off any repair over $200, free second opinions on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near North Haven
Our Gate Parts & Welding team works throughout the area. You’ll find us regularly in North Haven as well as Wallingford, Hamden, North Branford, and Wallingford Center. If you’re just over the town line, the trip charge is still nothing inside the county.
Serving North Haven, CT - Our Local Coverage Area
We’re based in the North Haven area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Haven
The problem is the soil, not the post. North Haven sits in the Quinnipiac River valley, where the clay-heavy ground holds water, freezes, and expands. When it thaws, the ground settles unevenly, and a post that was set shallow pushes out of plumb. If the footing wasn’t dug below the frost line and given a wider base, it will move again every single winter. That’s why we cut out the old footing and pour deeper than code requires. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 to have us look at the footing; the estimate is free.
Yes, in most cases. A cracked hinge on an old gate is usually a stress failure from a post that moved, not a death sentence for the gate. We weld the hinge, add a reinforcing plate, and then fix the post so the hinge stops taking that load. The gate stays in your driveway. There are exceptions, like rust that has eaten through the frame so thin that the weld won’t hold. We’ll tell you honestly which camp your gate falls into. Call (877) 610-2993 and we’ll come look.
Not always. The board may be fine and the problem could be a limit switch, a failing capacitor, or a roller that’s binding. But if the board is the culprit and it’s a 1990s unit, the board may no longer be manufactured. At that point we’ll quote you a retrofit option and a full operator replacement side by side so you can see both prices. Call (877) 610-2993 and we’ll diagnose it on site.
Yes. UL 325 is the federal safety standard for gate operators, and it applies to every gate, including the ones installed decades ago. Older gates often lack the modern safety edges and photo eyes that current code requires. When we work on your gate, we’ll bring it up to compliance. We won’t weld a hazard back into service. Call (877) 610-2993 if you’re not sure whether your gate meets current standards.
Partly yes. The Route 5 and Washington Avenue corridor through North Haven has a dense concentration of chain-link slide gates serving warehouse and distribution yards. These gates cycle constantly, far more than a residential gate ever would. Add road salt spray and river-valley humidity, and the rollers wear faster than they would in the sandier towns north of here. We stock heavy-duty rollers and we’ll tell you when it’s time to step up from light-duty hardware. Call (877) 610-2993 and we’ll come measure.
Clay Soil, Old Gates, and the North Haven Pattern
North Haven’s clay-heavy Quinnipiac River valley soils expand and contract dramatically through Connecticut’s freeze-thaw cycles, heaving gate posts out of plumb and causing chronic hinge misalignment that recurs season after season. This pattern is far more prevalent here than in the sandier upland towns to the north. A gate that works fine in Wallingford or Hamden may be fighting the ground every winter in North Haven because the valley soil doesn’t drain the same way.
We pulled a 1980s chain-link swing gate on a ranch off Dixwell Avenue where the hinge post had rotated a full 4 inches out of plumb after the last thaw. The welded hinge ears had snapped clean off the post. We cut out the rotted footing, poured a new 3-foot-deep post footing with a wider base, and rehung the gate with reinforced hinge plates. The same gate that had been re-straightened twice in the past five years finally stopped sagging. That’s the difference between fixing what you see and fixing what’s under the ground.
If the hinge post is moving every spring, call us. We’ll come to your home in North Haven, look at the gate and the ground it sits in, and tell you honestly what needs to be done and what it will cost before we touch a tool. Hal Gatewood’s name is on the shop, and he’s been at this since 2001. Call (877) 610-2993 and talk to a real person, any hour, any day.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Haven since 2001.