Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Bethesda
Gate hinge replacement in North Bethesda typically runs $280-$520 for a standard ornamental steel gate on a brick pilaster, and a full post reset with new footing is usually $700-$1,400 depending on gate weight and access. We do most welded repairs on site in your driveway, same visit. If you live in Luxmanor, White Flint Park, along the Pike & Rose corridor, or anywhere in 20852, call (877) 610-2993 and a live person answers, day or night. Hal Gatewood has been doing this since 2001, and the name on the shop is the name on every invoice.
We know North Bethesda’s gates because we work on them every week. The 1960s ornamental ironwork in Luxmanor doesn’t fail the same way the powder-coated aluminum slide gates at Fallsgrove fail, and a repair that works for one will wreck the other. That local familiarity is why homeowners here call us instead of rolling the dice with someone who has never worked a gate on a Montgomery County brick pilaster.
Why Gatewood Fence & Gate Is North Bethesda’s Preferred Gate Parts & Welding Company
This is the part where we’re supposed to give you a count of five-star reviews. We’d rather tell you what actually matters: we answer the phone around the clock, the person who shows up knows North Bethesda’s housing stock, and every job carries a 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no claim ticket number, no escalation queue.
North Bethesda reviews mention the same things: the quote on the phone matched the invoice, the weld was cleaned up and painted, and the gate swung properly when we left. We work all of 20852, from the townhomes off Rockville Pike to the custom homes on the quieter streets off Old Georgetown Road. Dispatch and scheduling are coordinated from our Washington, DC office, but the crews are local to North Bethesda and know the streets.
We’re licensed and insured, background-checked, and certified on the operators North Bethesda homes actually use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Gate Parts & Welding team stocks a rolling shelf of hinges, rollers, strike plates, and weld rod on the trucks, which means most calls are one trip, not two.
Our Gate Parts & Welding Services in North Bethesda
Hinge Replacement
Hinges are where ornamental gates in North Bethesda fail first. The original barrel hinges on 1960s and 1970s wrought-iron gates in Luxmanor and White Flint Park were never meant to carry the weight of a retrofitted operator. We cut off the old hinge, grind the post clean, weld a new heavy-duty bearing hinge in place, and set the gate back plumb. A hinge replacement on a standard residential swing gate in 20852 usually runs $280-$520 including parts, labor, and paint.
Post Replacement
A sagging gate is almost always a post problem. Montgomery County’s clay soil heaves through freeze-thaw cycles each winter, and over 40 or 50 years that slow movement works a post loose at the footing. We dig out the old footing, pour a new one below frost line, set the post plumb, and re-hang the gate. The gate stays in your driveway the whole time. In North Bethesda, full post replacement on a brick pilaster runs $700-$1,400, and we include a written breakdown before any work starts.
Rail Repair
Ornamental gates take hits: a delivery truck clips a corner, a wind gust throws the leaf into a fence post. We weld cracked rails, straighten bowed top and bottom channels, and re-tie loose pickets so the gate’s geometry stays true. If the rail is too far gone, we fabricate a replacement section in the truck and weld it in. Rail repair for North Bethesda gates runs $250-$650 depending on how much section needs replacing.
Custom Welding
We do a lot of custom welding in North Bethesda for gates that don’t fit a catalog part. A hinge plate that needs a stepped offset for a brick pilaster. A slide-gate end truck that’s no longer made. An ornamental spearhead that snapped off and needs matching. We weld on site, we powder-coat or paint to match, and we warranty the work for 90 days in writing. Custom welding jobs in North Bethesda generally run $180-$500 for a small repair, more for full fabrication of a replacement leaf or frame section.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Bethesda
North Bethesda gates run on a mix of equipment. The older Luxmanor estates still have 1990s FAAC and Linear operators that are increasingly hard to source parts for. The newer Pike & Rose and Fallsgrove developments run LiftMaster and BFT units tied into cloud-based intercoms and fob readers. We stock common replacement parts for all of them, and we can source legacy parts for older FAAC and Linear boards within a day or two. That matters when your gate is stuck open at midnight in 20852.
Common Gate Parts & Welding Problems We See in North Bethesda Homes
- Frost-heaved posts throwing gates out of plumb. Montgomery County’s clay soil expands and contracts through every freeze-thaw cycle. By late winter in North Bethesda, swing gates bind on hinge pins and strike plates because the post shifted a half inch.
- Rusted hinge posts on 1960s-70s ornamental gates. The original footings in Luxmanor and White Flint Park were often just a concrete collar poured around the post base. Fifty years of soil moisture and road salt has eaten through the steel at grade level.
- Ice-storm damage on aluminum slide gates. The DC metro’s ice storms hit North Bethesda harder than points south. Aluminum slide gates along the Rockville Pike corridor take on ice, bend at the frame, and knock the rack and pinion out of alignment, overloading the operator.
- Failed 1990s operators that can’t pass UL 325 entrapment testing. Many North Bethesda homes still run first-generation automatic operators that don’t meet current safety standards. We replace the operator and the safety edge, but we also check the hinges and posts, because a worn hinge can cause entrapment even with a brand-new eye.
Pricing for Gate Parts & Welding in North Bethesda, MD
Here’s what we actually charge in North Bethesda. Hinge replacement runs $280-$520. Post replacement runs $700-$1,400 depending on gate weight, post material, and footing condition. Rail repair runs $250-$650. Custom welding runs $180-$500 for a typical repair. A full operator replacement with new safety eyes and battery backup runs $850-$1,800 installed. Every price is quoted and agreed before any work starts. No trip charge inside Montgomery County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number before we touch a tool.
We Also Serve Cities Near North Bethesda
Beyond 20852, we handle gate parts and welding in Bethesda, North Kensington, South Kensington, and Rockville. Gate Parts & Welding in North Bethesda is home base for this area, but the trucks move through all of central Montgomery County during the week. If your gate is in one of these nearby cities, the same crew, same pricing, same 90-Day Done Right Promise applies.
Serving North Bethesda, MD - Our Local Coverage Area
We’re based in the North Bethesda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Bethesda
Yes, Montgomery County requires a building permit for structural post work, including a post replacement that involves new footing excavation. If inspectors find unpermitted post work on a North Bethesda property, they can issue a stop-work order. We include permit coordination as a line item on any post replacement quote in 20852 so you never get surprised by the county. Call (877) 610-2993 and we’ll walk you through what the permit entails for your specific gate.
The sag isn’t in the hinge, it’s in the post. North Bethesda’s clay soil freezes, heaves, and settles each winter, slowly rotating the post at the footing. Tightening the hinge just masks the movement for a few weeks. The fix is digging down to the footing, resetting the post plumb below frost line, and reinforcing the hinge plate with a welded bracket. We do this job in White Flint Park regularly each spring.
Yes, but touch-up is required. Aluminum welding concentrates heat in a tight zone, so we protect the surrounding powder coat, weld the crack, grind the bead smooth, and apply a matched touch-up coating. The repaired section will be structurally sound and close in appearance, but no welder can promise a perfectly invisible repair on colored powder coat. A typical crack repair on a Pike & Rose slide gate runs $250-$400.
Nearly always, you just need the operator and new hinges. The ornamental steel gate itself usually has decades of life left. What fails first is the 1990s control board, then the hinge pins that have been carrying the extra operator load for 30 years. We replace the operator with a current UL 325-compliant unit, swap the hinges, and the gate runs like new. A full operator plus hinge job in North Bethesda runs $1,100-$2,200 installed, far less than a new custom gate at $4,000-$8,000.
Yes. Underground operators are common on the custom properties in North Bethesda where visible operators would ruin the look of an ornamental gate. We service FAAC and BFT underground units, pull and replace failed hydraulic boxes, and set new foundation boxes when a replacement unit has different dimensions. Underground replacements in North Bethesda run $2,400-$4,800, and a live person answers your call 24/7 at (877) 610-2993 to schedule an inspection.
The Dual-Market Reality of North Bethesda Gates
North Bethesda’s 20852 ZIP is a rare dual-market gate zone. Drive through Luxmanor and you’ll see 1960s ornamental wrought-iron gates mounted on brick pilasters, many retrofitted with first-generation 1990s operators that are now failing entrapment-protection tests under UL 325. Drive five minutes down to Pike & Rose and you’re looking at powder-coated aluminum slide gates tied into cloud intercoms and fob-based access systems. A gate tech here has to be fluent in both legacy ironwork and modern low-voltage electronics, and that combination is not demanded at this density in neighboring Rockville or Bethesda.
We recently reset a sagging ornamental swing gate on a brick pilaster in Luxmanor where the original 1970s hinge post had corroded at the footing and the gate dragged on the driveway. Our crew poured a new post footing, welded a reinforced hinge plate, and installed a heavy-duty LiftMaster operator with fresh safety photocells. The gate now swings silent and plumb, with no more strain on the latch hardware. That’s the kind of repair a generic gate service won’t do: they’ll tell you the post is fine and the gate is just old. The post wasn’t fine. It was rusted through below grade.
Hal Gatewood has been at this since 2001. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 for a free estimate on any gate parts or welding job in North Bethesda.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Bethesda and surrounding Montgomery County communities since 2001.