Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across New Canaan
Gate parts and welding in New Canaan usually means one of two things: replacing a hinge or roller on a standard gate, or repairing a heavy custom iron estate gate that has spent two decades fighting the freeze-thaw cycle. Most jobs run between $180 and $650 for parts and labor, with custom welding work on ornamental iron typically starting around $350. A few jobs, particularly on aging in-ground hydraulic operators, require a full replacement conversation because the original parts no longer exist. Call us at (877) 610-2993 and Hal or one of his crew will tell you straight what you’re looking at.
We spend a lot of time in New Canaan, and what sets it apart from Norwalk or Stamford is the gate stock itself. These aren’t the chain-link driveways you see across most of Fairfield County. These are heavy custom steel and iron swing gates on granite pillars, hung twenty to thirty years ago when the estate-building market was running hot. When one of those sags or stops latching, the repair is a different animal, and we treat it that way.
Why Gatewood Fence & Gate Is New Canaan’s Preferred Gate Parts & Welding Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the name is on the shop and on every invoice. That matters in a town like New Canaan, where a handshake still means something and a gate that won’t close on a two-acre wooded lot is both a security issue and a weekend headache. Our customers in New Canaan tend to check us out before they call. They see the published address, the license number, the twenty-nine years in local communities, and the 90-Day Done Right Promise stamped in writing on every job. If it’s not done right, one call brings Hal back. No runaround.
We answer the phone with a live person, twenty-four hours a day. Not a voicemail tree, not a call center three states away. When someone off Frogtown Road calls at 7 a.m. because their gate won’t open and the kids can’t get to school, a real person picks up. That’s been the rule since day one, and it’s why a lot of our New Canaan work comes from neighbors telling neighbors. The person who shows up is background-checked, uniformed, and works for Hal directly.
We also service what most companies won’t touch. The Gate Parts & Welding team welds on site, in your driveway, so the gate never leaves your property. That’s faster and it means you can watch the work happen. We’re not hauling your gate to some shop in another county. We’re fixing it where it hangs.
Our Gate Parts & Welding Services in New Canaan
Here’s what we actually do in New Canaan, on the ground, week in and week out:
Hinge Replacement
On New Canaan estates, hinge failure is rarely just a hinge. The gate might weigh 600 pounds, and when a hinge wears out, the whole panel drops and drags on the driveway. We replace hinges with new hardware correctly rated for the gate’s actual weight and width, not whatever was on the shelf. The hinge post itself is often the real problem, so we check that before we quote. A sagging gate often has both a worn hinge and a post that’s starting to move.
Post Replacement
Granite and fieldstone pillars are standard in New Canaan, and they’re unforgiving. When a steel post inside or alongside a pillar rusts out or the footing heaves, the gate drops. We set new posts in properly anchored concrete, and we account for the freeze-thaw movement that inland Fairfield County gets every winter. Fix the panel without the post and you’ll fix it twice. That’s not a sales line; it’s what we see on follow-up calls from other companies’ work.
Rail Repair
A bent top or bottom rail throws off the entire gate’s geometry. On ornamental iron gates, a damaged rail often comes from a nor’easter dropping an oak limb across the drive. We straighten when it’s safe and weld-reinforce the section so it holds. On slide gates, we handle rail and track repair, including clearing compacted leaf debris that builds up along long wooded driveways off Ponus Ridge Road and Silvermine Road.
Custom Welding
This is where we earn our keep. New Canaan has an unusual concentration of custom ornamental iron work, gates built in the 1990s and 2000s that were never off-the-shelf. When a weld fails or a section cracks, you can’t order a replacement panel. We weld on site, matching the existing work as closely as the material allows. We’ve rebuilt hinge mounts, repaired cracked scrollwork, and fabricated new brackets for operators no longer in production. The gate stays in your driveway and Hal’s crew does the work in front of you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Canaan
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around New Canaan we see a lot of FAAC and BFT hydraulic units from the estate-building years, plus Linear and Viking on newer retrofits. If your operator is from the 1990s or early 2000s, there’s a real chance the control board is no longer manufactured. We’ll tell you that honestly, and we’ll lay out what a replacement looks like before any work starts. For common parts like hinges, rollers, and latch hardware, we carry local stock and can usually turn a standard repair around the same day.
Common Gate Parts & Welding Problems We See in New Canaan Homes
- Heaved granite pillar bases throwing gates out of alignment. New Canaan’s freeze-thaw cycle moves the ground under stone pillars every winter. By March and April, gates that worked fine in October are dragging or won’t latch. We reset and anchor the post, then correct the gate geometry at the hinge and operator mounts.
- Obsolete control boards on 1990s and 2000s hydraulic operators. These fail intermittently, leaving a gate stuck mid-swing. When the board is gone, it’s gone, and the honest fix is usually a full operator replacement rather than a component patch.
- Falling oak and maple limbs denting or cracking ornamental iron frames. New Canaan’s tree canopy is beautiful, and it’s also heavy. Nor’easters drop limbs onto gate frames along long wooded driveways every year. We weld-repair the structural sections so the gate is sound, not just cosmetically patched.
- Slide gates jammed with debris from long, wooded lots. Leaves, twigs, and soil fines pack into slide tracks and roller channels. We clean the run, replace worn rollers, and adjust the track so the gate travels cleanly through all seasons.
Pricing for Gate Parts & Welding in New Canaan, CT
Here are honest numbers for New Canaan, not a national average. A standard hinge replacement on a medium-weight driveway gate runs $180 to $320. Post replacement starts at $450 and climbs depending on whether we’re working against a granite pillar or removing rotted steel. Rail repair and straightening with weld reinforcement typically lands between $250 and $500. Custom welding work, including on-site fabrication, starts around $350 and goes up with the scope of the repair. A full operator replacement on an older hydraulic in-ground system usually runs $1,400 to $3,200 installed, parts and labor. Where your job falls depends on the weight of the gate, the condition of the posts, and whether the parts still exist. You’ll get a written price before we touch a tool, and that’s the number on the invoice. No trip charge inside the county, and we offer $40 off any repair over $200. Seniors and veterans get 10% off, straight across.
We Also Serve Cities Near New Canaan
While this work keeps us busy in New Canaan’s 06840 and 06842 zip codes, we run the same truck out to North Stamford, Norwalk, Darien, and Wilton. If you’re just over the town line, the same crew and the same 90-Day Done Right Promise apply. And if you’ve got a written estimate from another gate company, we’ll give it a free second opinion before you spend a dollar.
Serving New Canaan, CT - Our Local Coverage Area
We’re based in the New Canaan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in New Canaan
It depends on the unit’s age and the failure point. In-ground hydraulic operators installed in New Canaan during the 1990s and 2000s are now past their 15 to 20 year service life, and OEM parts for many models are no longer manufactured. If it’s a coupling, a hydraulic line, or a control board on a unit where boards are still available, we repair it. If the board or the cylinder is gone and there’s no aftermarket source, replacement is the cheaper answer over the next five years, and we’ll show you the numbers before you decide. Call (877) 610-2993 and we’ll talk through your specific gate.
Most of the time, you need new hinges and post work, not a new gate. A gate sags in the hinge post, not in the middle, and that is where we start. We’ll lift the leaf, inspect the hinge mounts and the post, and reset what’s moved. If the post has heaved or the hinge pin holes have wallowed out, we correct that at the footing and weld new reinforced mounts. The gate itself is usually fine. It just wasn’t hung right anymore.
Most gates installed in New Canaan before the mid-2000s do not fully meet current UL 325 entrapment standards. That’s not a code violation unless the gate is being newly installed or the operator is being replaced, but it is a safety issue, especially on a property with children or delivery traffic. When we replace an operator, we bring the gate up to current safety requirements: photocells, reversing edges, and proper force settings. We’ll tell you what’s missing and what it costs to add. This is high-energy mechanical equipment, and a gate that reverses correctly is the difference between an inconvenience and an injury.
We weld on site, in your driveway, and we work to match the existing metal as closely as the material allows. On a two-acre lot off Ponus Ridge Road, we replaced a worn hinge post on a heavy ornamental iron swing gate that had sagged enough to trip the safety photocell every morning. The original in-ground hydraulic operator was still running, but the coupling had wallowed out from years of freeze-thaw heave. We welded a new reinforced mount, corrected the sag at the post footing, and reprogrammed the LiftMaster board to restore proper entrapment protection. That’s typical for New Canaan: the gate is worth saving, the mounting hardware is the weak point, and the fix is welded, not bolted.
First, we clear the entire run, including the roller channels and any drainage slots. Then we look at why the debris is a problem. On a New Canaan lot with mature oak and maple, leaves and twigs are a fact of life. The fix is usually a combination of replacing worn rollers, adjusting the track height, and adding a debris guard or a steeper crown so material doesn’t pack in. We’ll get it running clean and tell you what to do between service visits. Call (877) 610-2993 and we’ll get you on the schedule, free estimate included.
We cover all of New Canaan, including the 06840 and 06842 zip codes. That means the estates off Ponus Ridge Road, the long driveways up Smith Ridge Road, the wooded lots around West Road, and the in-town properties off Elm Street. If you’re in New Canaan proper or just over the line into North Stamford or Wilton, we’ll come out. A live person answers the phone around the clock, so you’ll know exactly when we’re coming.
For emergency situations, like a gate stuck open or a gate that won’t close and you need the property secured, we treat it as urgent and get a crew out as fast as the schedule allows, often the same day. For standard hinge or roller work, we’ll set a window that works, not a four-hour maybe. Call (877) 610-2993 and a live person will tell you the actual schedule, not a recording. We don’t promise a dispatch time we can’t keep, and we don’t let a gate sit broken longer than it has to.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Canaan since 2001.