Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Natick
Gate parts fail at the worst times, usually when the ground is frozen, the driveway is blocked, or a latch has seized shut. Gatewood Fence & Gate repairs what’s broken rather than replacing what isn’t. We stock hinge kits, rollers, latches, and lock hardware, and Hal welds on site so your gate stays in your driveway throughout the fix. If you’re in Natick and your gate is sagging, grinding, or won’t close, call (877) 610-2993. A live person picks up, day or night, and the person who shows up knows the frost heave, salt corrosion, and lakeside moisture problems that Natick gates deal with every year.
Key Takeaways
- On-site welding keeps your gate in place; we don’t haul it to a shop unless the job truly calls for it.
- Natick’s 48-inch frost line means most gate post failures come from under-depth footings, not the hinge itself.
- Pricing is quoted and agreed before any work begins, and every job carries the 90-Day Done Right Promise in writing.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite operators found on Natick driveways.
Why Gatewood Fence & Gate Is Natick’s Preferred Gate Parts & Welding Company
Hal Gatewood started fixing gates in 2001, and his name is on the shop and on every invoice. That’s the kind of accountability that matters when you’re comparing fix-it-quick operations against a company whose published address and license number anyone can look up. Our Gate Parts & Welding crew has worked on gates throughout Natick for years, and we know what we’re walking into before we arrive: center-entrance Colonials off Route 27 with ornamental iron swing gates, lakeside properties where buried posts rot at the soil line, and 1990s spec-built homes whose operators are aging out together.
Natick homeowners tell us the same story about other companies: a phone quote that changed at the door, a truck that showed up late, a repair that lasted one season. We don’t do that. The price Hal quotes is the price on the invoice. If it’s not done right within 90 days, one call brings him back, no runaround. That’s not a slogan. It’s stamped in writing on every job we finish in Natick.
Scheduling and dispatch for our crews serving Natick are coordinated from our Boston office, but the work is done by local people who know the town. We answer the phone with a live person around the clock, and we’ll tell you straight if a hinge can be welded instead of replaced. Call (877) 610-2993 and ask.
Our Gate Parts & Welding Services in Natick
Hinge Replacement
Most Natick gate sags are hinge problems, but not always the ones you can see. Salt spray off Route 9 and Route 27 works into hinge barrels and seizes them, and when a hinge can’t move freely, the gate twists the post instead. We replace welded barrel hinges, leaf hinges, and spring-loaded self-closing hinges with hardware matched to the gate’s weight and span. On ornamental iron gates we grind off the old hinge and weld the new one in place, then adjust the gate so it swings true before we leave.
Post Replacement
In Natick, the frost line reaches 48 inches, and any post set shallower than that will heave. This is the single most common gate failure we fix in town: a concrete footing poured to code minimum that still moves through freeze-thaw cycles and throws the gate out of plumb each spring. We excavate the old footing, set a new post to a proper 48-inch depth, and pour concrete so the post stays put. Fix the panel without the post and you’ll fix it twice. That’s why we start at the hinge post every time.
Rail Repair
On Natick’s larger wooded lots near Lake Cochituate, long driveway gates take serious wind load, and the rail is what carries that stress. When a top or bottom rail cracks, the gate flexes, the latch stops catching, and the operator struggles. We straighten bent rails, weld cracked joints, and reinforce weak sections with gusset plates so the gate keeps its shape. Wood rail gates on older ranch and split-level properties get new rot-resistant rail stock sized to the original gate frame.
Custom Welding
Some gates shouldn’t be patched back together with off-the-shelf brackets. Hal welds custom hinge plates, latch mounts, operator brackets, and gate stiffeners on site in Natick, so the repair fits the exact gate you have, not the gate a parts catalog expects. We work in steel, aluminum, and wrought iron, and we weld the way a gate needs it: strong enough to survive New England winters and salt exposure, not just strong enough to look good for one season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Natick
The gates around Natick were mostly installed during the 1990s and 2000s build-out, and a lot of them run on LiftMaster and Elite operators. We carry parts and hardware for those and for Linear, Viking, Ghost Controls, and DoorKing systems, so we can usually repair a failed opener or a seized limit switch without waiting on a distributor. If the operator is genuinely dead, we’ll tell you that too and quote a replacement honestly. Certified to service nine major gate brands means we’re not learning on your gate.
Common Gate Parts & Welding Problems We See in Natick Homes
- Frost heave moving swing gates out of alignment. With a 48-inch frost line, Natick posts set even 6 inches too shallow shift every spring. The gate drags on the gravel, stress lands on the hinge post, and by June the rack is bent or the operator is pulling the gate out of plumb.
- Lakeside post rot near Lake Cochituate and Dug Pond. Persistent ground moisture rots buried wooden posts at the soil line, so the gate looks fine above ground and then suddenly leans hard. Full post replacement is the norm on those streets, not hinge adjustment.
- Salt corrosion on exposed hinges and latches. Road salt from Route 27, Route 9, and neighborhood streets eats at spring-loaded hinges and latch bolts all winter. Hinges seize in February, and by March the gate won’t close or the key won’t turn.
- Aging 1990s operators that still run but shouldn’t. A LiftMaster or Elite opener installed 25 years ago may still cycle, but it will be fighting the gate every time if the hardware has shifted. We check the whole gate, not just the motor.
Pricing for Gate Parts & Welding in Natick, MA
Hinge replacement in Natick generally runs $180 to $340 per hinge including the welded bracket, depending on gate weight and whether the post needs attention too. Post replacement with a new 48-inch footing typically lands between $450 and $900 per post, and that’s the job most often needed on lakeside lots and on gates built during the 1990s boom. Rail repair and custom welding usually start around $150 for a small crack or bracket and go up from there based on the extent of the damage. You’ll get a written price before any work starts. That price does not change at the door. We also give $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve received from another company.
We Also Serve Cities Near Natick
Gatewood Fence & Gate serves Natick and surrounding communities including Wellesley, Framingham Center, Cochituate, and Wayland. If you’re in one of those towns and need the same no-nonsense gate repair we provide in Natick, call (877) 610-2993 and we’ll get you scheduled. No voicemail, no call center, no guesswork.
Serving Natick, MA - Our Local Coverage Area
We’re based in the Natick area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Natick
Natick’s frost line is 48 inches, and many posts set during the 1990s and 2000s build-out were driven to code minimum without accounting for the actual frost depth on their lot, especially near tree cover and lakeside ground. Each freeze-thaw cycle shoves the footing upward a fraction of an inch, and after 20 or 30 years the hinge post is out of plumb enough to bind the gate. The fix is excavating the old footing and setting a new post to a true 48-inch depth, which usually runs $450 to $900 per post in Natick depending on access and gate weight. Call (877) 610-2993 and we’ll take a look and give you a written price.
Almost certainly not. Persistent ground moisture near the lake rots buried wooden posts at the soil line, so the visible part of the post stays intact while the underground section fails. The gate leans because the post is no longer anchored, not because the hinge moved. We replace the post and set the new one at proper depth, which in Natick lakeside soil means a full 48-inch footing. Call (877) 610-2993 for an exact quote; estimates are free.
Mains power is always the more reliable choice if it’s reachable without trenching a quarter mile of your property. But on Natick’s larger wooded lots where conduit is impractical, a well-sized solar kit on a Ghost Controls or Mighty Mule system can work if the panel gets enough southern exposure through the tree cover. We’ll give you an honest read on whether solar will keep up with Natick’s short winter days before you spend money on it. Call (877) 610-2993 and we’ll come measure and give you a written price.
Once a year, before winter salt starts going down. Natick’s road salt exposure from Route 27 and Route 9, the 48-inch frost heave cycle, and lakeside moisture all work on hinges, latches, and welded joints year round. A $150 to $200 annual inspection catches cracked welds and seized hinge barrels before they become a $900 post replacement. Call (877) 610-2993 to schedule; we’ll come out, inspect, and tell you what actually needs doing.
Usually we can repair it, especially if the operator still runs and the problem is a limit switch, gear, capacitor, or misaligned safety edge. We stock parts for LiftMaster, Elite, Linear, Viking, Ghost Controls, and DoorKing, so the most common failures get fixed is a day. If the operator truly is shot, we’ll say so, quote a replacement, and you’ll know exactly what it costs before we order anything. Call (877) 610-2993 for a free estimate.
Off Pine Street: A Natick Gate We Won’t Forget
Off Pine Street near Lake Cochituate, we replaced a rotted hinge post on a wrought-iron swing gate that had sagged into the gravel driveway. The 25-year-old LiftMaster operator was still running but pulling the gate out of plumb each cycle, and the original footing sat well short of the 48-inch frost line this town needs. We set a new 48-inch footing, welded fresh hinge brackets, and added a safety photocell to pass UL 325 entrapment protection. It’s the kind of failure we see all over the lakeside streets and 1990s neighborhoods along Route 27: the operator was fine, the post was not.
The Natick Gate Failure Pattern We See Every Week
Natick’s 1990s-2000s upscale build-out around Lake Cochituate and South Natick left a dense cluster of ornamental iron swing gates now hitting the 20-to-30-year mark simultaneously. Our crew sees the same failed LiftMaster and Elite operators and the same post-heave pattern from frost penetrating under-depth footings on wooded, lakeside lots. These installations were clustered in a short window and share similar spec-builder hardware, so we know what’s behind the symptom before we even arrive. That’s the advantage of a local company that has been fixing gates here since 2001, and it’s why our Gate Parts & Welding team comes ready for the specific failure modes Natick gates develop: frost heave at 48 inches, rot at the soil line on lakeside lots, and salt corrosion eating at hinges and latches every winter.
Call Gatewood Fence & Gate for Gate Parts & Welding in Natick
If your gate is sagging, grinding, heaving, or stuck, call (877) 610-2993. Hal will answer or call you back fast, and the price we quote before work starts is the price you pay. We serve all of Natick, including the neighborhoods around Lake Cochituate, Dug Pond, South Natick, and the Route 9 corridor, plus Wellesley, Framingham Center, Cochituate, and Wayland. Seniors and veterans get 10% off permanently. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Natick since 2001.