Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Parts & Welding Across Naranja
Gate parts and welding in Naranja usually comes down to one of three jobs: a hinge post that has rotted out in saturated soil, a swing gate that sags thirty years after it was built, or a weld that finally let go after three decades of salt air and humidity. Most of the gate hardware in this corridor went in during the mid-1990s rebuild after Hurricane Andrew, and that stock is now failing in clusters. We fix it in your driveway. We weld on site, we replace what actually needs replacing, and we do not haul your gate off to some shop forty minutes away. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Naranja’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That is not marketing copy. It means when you call about a sagging gate on SW 268th Street or a rusted hinge on a farm entrance off SW 134th Avenue, you are talking to the person who will stand behind the work. Our Gate Parts & Welding crew works across Naranja every week, which means we know the housing stock and we know the soil. We know that a post set in the wet season will heave by December. We know that a gate rebuilt in 1995 is now older than the truck we drive to it.
Every job we do in Naranja carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No runaround, no fine print. We answer the phone with a live person around the clock, not a voicemail. And the price we quote before we start is the price you pay when the job is done. That is not a courtesy. It is how Hal has run the company since the day he opened it.
Our Gate Parts & Welding Services in Naranja
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In Naranja, post replacement is the most common repair we do, because the flat, low-lying terrain holds water against steel footings for months at a time. We cut out the corroded post, weld in a new HVHZ-compliant steel post, and set the footing deep enough to stay put through wet season. A typical post replacement in Naranja runs $450-$900 depending on post size, gate weight, and whether we are working in concrete or open ground.

Hinge Replacement
Hinges on a 16-foot farm gate take enormous load, and in South Florida humidity they rust faster than nearly anywhere in the continental US. We replace hinges with greasable, corrosion-resistant barrel or weld-on hinges sized to the actual gate weight, not whatever was on sale at the hardware store. Most hinge replacement jobs in Naranja run $180-$420 per pair, including welding and alignment.

Rail Repair
On ornamental iron and chain-link gates around Naranja, the top and bottom rails take the brunt of rust and impact damage. We weld cracked rails in place, splice in new rail sections where the metal has thinned too far to save, and reinforce weak points so the gate does not twist out of square. Rail repair typically runs $150-$400 depending on how much of the rail needs replacement and whether we need to remove the gate panel to do it right.

Custom Welding
Sometimes the part does not exist anymore. A post-1992 gate from a fabricator that closed twenty years ago, a hinge bracket that was never standard to begin with, an ornamental gate that needs a matching picket welded back in. We do custom welding on site, in your driveway, with the gate still hanging. We build what the gate needs, not what a catalog happens to stock. Custom fabrication work in Naranja starts around $150 for simple brackets and runs up from there based on the piece.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Naranja
We are certified to service nine major gate brands, and around Naranja the ones we see most are LiftMaster on solar swing gates, Ghost Controls on acreage entrances, and DoorKing on older commercial and agricultural slide gates. We stock common parts for these brands so we are not waiting on a truck from out of state when your gate is stuck open. If your operator is a Viking or an Elite, we service those too. The point is this: we fix what you have. We do not sell you a new operator because the old one needed a limit switch.
Common Gate Parts & Welding Problems We See in Naranja Homes
- Heaving post footings. Naranja’s wet season saturates the soil, and by dry season the ground contracts. Posts set in that cycle shift, the gate goes out of alignment, and the operator starts fighting the gate. We reset or replace the post and re-weld the hinge assembly to hold true.
- Accelerated rust on hinges and motor housings. Year-round humidity plus salt air from the coast means a steel hinge that would last twenty years in central Florida is often done in ten here. We replace with corrosion-resistant hardware and weld points that are painted and sealed, not just painted.
- Cluster failures across the Andrew rebuild. A surprising amount of Naranja’s gate hardware was installed between 1993 and 1998. Those gates are now hitting thirty years old at the same time. We see entire streets where three or four homes need post work in the same season.
- Non-compliant storm hardware. Miami-Dade HVHZ code requires approved product listings for gate components on any permitted job. We regularly find non-listed hinges, posts, and operators installed after a quick storm repair. A failed inspection means the work gets redone, and we fix it right the first time.
Pricing for Gate Parts & Welding in Naranja, FL
You will not get a vague “call for pricing” from us. Here is what gate parts and welding actually cost in Naranja right now. Hinge replacement runs $180-$420 per pair. Post replacement runs $450-$900 depending on gate weight and footing condition. Rail repair runs $150-$400. Custom welding starts around $150 for a simple bracket and goes up based on the fabrication involved. Motor and opener part replacements on LiftMaster, Ghost Controls, or DoorKing units typically run $200-$650 including the part and the labor to install it. The price we quote is the price you pay, agreed before any work starts. We do not show up and suddenly discover a problem that doubles the bill. And every Naranja customer gets a free written estimate before we touch the gate, no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Any repair over $200 gets $40 off. That is just how we run the shop.
We Also Serve Cities Near Naranja
Our crews work throughout South Miami-Dade, so if you are in Princeton, Leisure City, Homestead, or Florida City, we can be there just as quickly. The same owner-operated company, the same 90-Day Done Right Promise, and the same live person on the phone. Call (877) 610-2993 and tell us what the gate is doing.
Serving Naranja, FL - Our Local Coverage Area
We’re based in the Naranja area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Naranja
The soil here is the culprit. Naranja is flat and low-lying, so water sits against post footings for months during the wet season, and when the ground dries out it contracts and shifts. Posts set at standard depth in saturated soil will heave. We set replacement posts deeper and use concrete footings sized for Miami-Dade’s soil conditions, not the depth a builder in Georgia would use. If your gate keeps going out of alignment every year, the fix is usually a properly set post, not another hinge adjustment. Call (877) 610-2993 and we will come look at it free.
Technically you can install whatever you want on your own property, but here is the reality. Naranja sits in the Miami-Dade High Velocity Hurricane Zone, and if that gate ever gets hit by storm damage and you file an insurance claim, the adjuster will check the hardware. If the hinge or post is not HVHZ-approved, you are likely to have the claim denied or reduced. And if you ever sell the home, the inspection will flag it. We only install HVHZ-compliant components on permitted work, because the cost difference is small and the liability difference is not. That same repair across the county line in Broward would not require these approved components at all. Here, it is the law.
Almost always the hinge post. A gate sags in the hinge post, not in the middle, and that is where we start. When the post leans, the gate follows it. When the post rots at the footing, the gate drops. Replacing the panel without fixing the post means you will fix it twice. We will cut the old post out, weld in a new HVHZ-compliant post, and realign the gate so it swings true. In most cases, the panel itself is fine. The post was the problem all along. Call (877) 610-2993 for a free look, and we will tell you straight whether the panel can stay.
If your gate operator was installed before the mid-2000s, probably not. Miami-Dade code requires entrapment protection on automatic gates, which means photo eyes or contact edges that reverse the gate if something is in its path. We check this on every automatic gate we service in Naranja, because a gate that closes on a child or a dog is not a repair issue, it is a safety emergency. If your opener lacks the protection, we will quote you the cost to add it. It is usually a few hundred dollars well spent. We never skip this step, and we will show you what we found.
Usually the battery or the charge controller. Thunderstorms in Naranja drop heavy rain and knock out direct sunlight for a day or two, and a solar panel that is sized barely enough for sunny weather cannot keep the battery topped up through cloud cover. The battery drains, the control board shuts down, and the gate stops moving until the sun returns. We check the panel output, the battery condition, and the charge controller, and we replace what is actually dead. It is a common fix on acreage entrances off SW 134th Avenue and through the Redland district. Call (877) 610-2993 and we will diagnose it over the phone in most cases.
Call Gatewood Fence & Gate for Gate Parts & Welding in Naranja
If your gate is sagging, rusting through, or sitting stuck halfway open, call us before it gets worse. A live person answers 24/7 at (877) 610-2993. We will talk through what the gate is doing, give you a straight answer on what it needs, and schedule a time to come out. The estimate is free. The price is agreed before we start. And when the job is done, it is done right, or we come back. Hal Gatewood’s name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Naranja and South Miami-Dade since 2001.





Before
After
Before
After
Before
After