Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Naples
Gate parts and welding in Naples usually means one of two things: a hinge post that finally let go under a wide, heavy gate, or a weld that salt air ate through faster than anyone expected. Most repairs run $240-$480 for a standard hinge or roller replacement, and heavier structural work like a new post with a full-penetration weld lands between $800 and $1,800 depending on the span and footing. Hal Gatewood has been welding and repairing gates on Naples properties since 2001, and the truck rolls with the welder, the spare steel, and the parts bins loaded. Call (877) 610-2993 and a live person picks up. Not a recording, not a queue.
Naples is different from the rest of southwest Florida, and we mean that in a way that matters for your gate. The salt coming off the Gulf settles into every hinge, bracket, and weld. The wind-load rules in Collier County push heavier footings than what builders use twenty miles north. And the rural acreage east of town has its own set of demands, solar power, long runs, and gates wide enough to move livestock and equipment through. We work all of it.
Why Gatewood Fence & Gate Is Naples’s Preferred Gate Parts & Welding Company
We’re not a franchise. Hal Gatewood started this shop in 2001, and his name is on the invoice, the truck, and the work. That means something to people in Naples who have watched a national outfit quote one number on the phone and hand over a different one at the door. Our pricing is set before any torch lights up. You agree to the number, then we work. The 90-Day Done Right Promise comes in writing on every job. If the weld cracks or the hinge sags again inside ninety days, one call brings us back. No runaround, no “that’s a different failure” talk.
Calls are answered by a live person, around the clock. When a farm gate dies at the entrance on a Sunday evening and the livestock need to move, you call and Hal or his crew picks up. For Naples specifically, the crew stages out of our South Florida office in Miami, but the scheduling is built around Naples routes so we’re not charging you an hour of windshield time. Inside the county, there’s no trip charge. And in case it helps: a permanent 10% discount for seniors and veterans, plus $40 off any repair over $200.
Our Gate Parts & Welding Services in Naples
This is Gate Parts & Welding work, not a sales pitch for a new gate. We weld first, replace only what actually failed, and leave the rest alone. Here’s what that looks like in Naples.
Hinge Replacement
Salt air in Naples eats chrome and zinc-coated hinges in two to three years. What survives a decade in Orlando seizes here and then snaps under load. We cut the old hinge off, clean the post, and burn in a new one with a full weld. On heavy swing gates on acreage, we check the post while we’re there. A new hinge on a cracked hinge post is a waste of your money. The hinge work itself typically runs $180-$340 in Naples, more if the post needs attention too.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s the oldest lesson in this trade, and we see it constantly in Naples because the soil shifts with the wet-dry seasons and the salt accelerates post corrosion at ground level. We cut out the failed post, dig deeper footings, add rebar per Collier County wind-load requirements, and weld the new post square to the gate. Post replacement on a Naples residential gate runs $600-$1,400; a heavy farm gate post with a deeper footing and reinforcement lands higher, often $1,200-$1,800. The gate stays in your driveway the whole time. We weld on site.
Rail Repair
Slide gates on Naples properties take a beating. The bottom rail sits inches off the ground, so it picks up every bit of salt spray and every rain splash. We see rust-welded rails, cracked welds at the rail-to-post joint, and bent rails from years of cycling. We cut out the bad section, weld in new steel, and reinforce the joint. Rail repair runs $250-$500 in most Naples cases. If the rail is beyond saving, we’ll tell you straight and price the replacement rail before any work starts.
Custom Welding
This is the work Hal likes best, because it’s the work nobody else wants to do. A custom bracket for a Linear operator. A reinforced hinge plate for a Viking swing arm. A new latch assembly for a gate that hasn’t closed square since it was installed. We weld aluminum, wrought iron, and steel on site. Custom welding in Naples typically runs $180-$500 for a bracket or small fabrication, and larger jobs are quoted in writing before we strike an arc. If another company already quoted a full gate replacement, bring us the written estimate. A free second opinion is our standing offer, and we’ve saved Naples homeowners thousands by welding what others wanted to swap.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Naples
Hal is certified on nine major gate brands, and for Naples that matters because the communities out here run everything from Ghost Controls solar units on rural acreage to DoorKing and Viking operators on community entry gates. We stock common parts for those systems on the truck: control boards, limit switches, roller kits, and hinge assemblies. That means fewer return trips and a faster fix for you. Whether it’s a Linear arm on a residential swing gate in Golden Gate or a Viking slide operator off Livingston Road, the part gets handled by someone who knows the wiring and the welds behind it.
Common Gate Parts & Welding Problems We See in Naples Homes
- Salt-corroded hardware failure: Hinges, brackets, and latch bolts on Naples gates rust through in two to three years, not the ten you’d expect inland. The constant Gulf air means zinc and chrome coatings just don’t hold. We replace with heavier-gauge stainless or full-penetration welded steel, not the same plated pot metal that failed the first time.
- Solar gate operator battery failure during July and August: Naples’s overcast summer afternoons starve the trickle charge on solar panels, and large swing gates on acreage burn through the battery bank. We size replacement batteries for the cloud patterns we actually see here, not the manufacturer’s sunny-sky assumptions.
- Rust-welded slide gate tracks: Snowbirds leave in May and come back in October to find the gate frozen on the track and the post footing shifting. The humidity does that. We cut the track free, re-weld the sections, and reset the post before it leans any further.
- Hinge post cracking at the weld: On wide farm gates east of Naples, the hinge post takes the full swing load plus wind load. When the post cracks at the base plate, the gate drags across limestone driveways and chews up the bottom rail. We cut out the failed post and pour a deeper footing with rebar rated for Collier County’s 160+ mph wind-load standard.
Pricing for Gate Parts & Welding in Naples, FL
Here’s what gate parts and welding actually costs in Naples, in plain numbers.
- Hinge replacement: $180-$340
- Rail repair: $250-$500
- Post replacement (standard residential): $600-$1,400
- Post replacement (heavy farm gate, wind-rated footing): $1,200-$1,800
- Custom welding (bracket, latch, small fabrication): $180-$500
What moves the number is the gate span, the post condition, and whether the soil requires a deeper footing. We quote the price before any work starts and you sign off on that number. No surprises at the door. Free estimates, no trip charge inside Collier County, $40 off any repair over $200, and 10% off for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Naples
Gate Parts & Welding in Naples keeps us busy, but the truck routes through the whole area. We run calls to Golden Gate, Naples Manor, East Naples, and Naples Park the same week we quote them. If you’re on the edge of town or out on acreage, call and we’ll tell you when the crew is rolling through your neck of the woods.
Serving Naples, FL - Our Local Coverage Area
We’re based in the Naples area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Naples
Yes, in most cases we can. We cut the old post off at the base plate and weld a new post onto a reinforced plate, then anchor it with deeper footings that meet Collier County’s wind-load requirements for the 160+ mph gusts we see in this part of the state. If the concrete apron itself is cracked, we’ll tell you before any work starts. Call (877) 610-2993 and we’ll talk through your specific gate.
Naples gets long stretches of overcast afternoons in July, and a solar panel that trickle-charged fine in January can’t keep up with a battery bank that’s being pulled down by a heavy gate cycling in summer heat. We size replacement batteries for the cloud patterns we actually see here on the Gulf coast, not the manufacturer’s test conditions. We saw this on a long driveway off Oil Well Road east of Naples, where we rebuilt a Ghost Controls solar swing gate with a bigger battery bank and a new hinge post after the old one cracked at the weld. That gate has cycled clean through two summer storm seasons since.
We fix the hinge post. A gate sags in the post, not in the middle, so we cut out the failed post, pour a deeper footing, and weld a new post square to the gate. The panel goes back on straight and it stops dragging across the limestone. On most Naples properties, this runs $600-$1,400 depending on the gate span. Get an exact number from us at (877) 610-2993.
If the track is rusted but the steel hasn’t lost its thickness, we cut out the bad section and weld in new steel. If the rust has thinned the rail to the point where the wheels are grinding into it, we’ll show you and price a replacement rail before any work starts. Most track repairs in Naples run $250-$500. Call (877) 610-2993 and we’ll give you a straight answer.
Yes, we replace hinge pins on livestock gates, and if the gate is dragging, the real fix is usually the post the hinge is mounted on. We weld a new hinge pin into a reinforced post, and if the post has shifted, we reset it with a deeper footing. That’s the difference between fixing the gate once and fixing it twice. For a livestock gate on Naples acreage, expect $400-$1,000 depending on the gate width and post condition.
If your gate is sagging, seized, or running on solar power that quit, call (877) 610-2993. We’ll answer, we’ll listen, and we’ll give you a real price before any work begins.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Naples since 2001.