Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Naples Manor
Gate parts and welding in Naples Manor usually means one of two jobs: a hinge post that has rusted through at the soil line, or a gate that has started dragging because the original 1970s anchors finally gave out. We handle both, and we fix them at your driveway rather than hauling the gate to a shop. Hal Gatewood has been welding on site since 2001, and the person who answers the phone at (877) 610-2993 is a live human being, any hour of the day or night. If your gate leans, binds, or the latch will not catch, call us before it falls on a car or a grandkid.
Naples Manor is different from the gated communities up in Naples proper and over in Lely. Those HOAs schedule routine gate service like clockwork. Your neighborhood is full of concrete-block ranch homes built between the 1960s and 1990s, and most driveway gates in Naples Manor are original. They have never had a hinge replaced, never had a post reset, and the lowest six inches of the post have been sitting in damp acidic fill soil for decades. We know exactly what that does. We see it every week on 34112 streets.
Why Gatewood Fence & Gate Is Naples Manor’s Preferred Gate Parts & Welding Company
Locally owned and owner-operated since 2001 means Hal Gatewood’s name is on the shop and on every invoice. He is not a franchise rotating crews through three counties. When you call about a sagging swing gate in Naples Manor, you get a straight answer about whether the panel is worth saving or the post needs to be dug out and replaced. Our Gate Parts & Welding team welds on site, so your gate never leaves your property. You can stand in the driveway and watch the repair happen.
We do not do phone-then-swap pricing. The quote you get before work starts is the price you pay. Every job, including a hinge replacement or post replacement in Naples Manor, carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings us back, no runaround. That promise matters in a neighborhood where a lot of homeowners have been burned by outfits that quote one number and invoice another.
We service nine major gate brands, including Ghost Controls, DoorKing, Elite, and Viking. Most Naples Manor gates are simple tubular steel or wrought iron single-swing units, but plenty of them run on older automatic operators, and those operators deserve honest repair work too. We stock common parts locally for Naples Manor customers, and when something needs to be welded, we weld it. We do not upsell a full replacement when a $40 hinge and twenty minutes of work gets your gate swinging true again.
Our Gate Parts & Welding Services in Naples Manor
Hinge Replacement
Hinges on Naples Manor gates fail in a pattern you can nearly set a calendar to. The wet season saturates the ground from June through September, the posts shift a little, and the hinges bind. Then the salt air from the Gulf, roughly five miles west, keeps working on whatever steel is exposed. We remove the old hinge, grind the post clean, weld the new hinge in place, and shim the gate so it hangs level. A hinge replacement in Naples Manor typically runs $120 to $280 per hinge, including the welding, depending on gate weight and hinge size.
Post Replacement
This is the big one in Naples Manor. The original gate posts on homes built from the 1960s through the 1990s were set in sandy, organically-rich fill soil that holds water. Add salt air, and the bottom six inches of the post rust through completely while the visible part above ground still looks fine. We saw this recently on a tubular steel swing gate off a 1970s ranch in Naples Manor. The gate looked straight, but the post anchor at ground level had corroded to nothing. We set a new post with a deeper concrete footing, re-welded the hinges, and recalibrated the Ghost Controls gate operator’s limit switches so the correction held through the June standing-water season. Post replacement in Naples Manor runs $280 to $650 per post depending on depth, diameter, and whether the old concrete pad has to be broken out.
Rail Repair
Rails crack. They crack from years of the gate sagging and dragging, and they crack faster in Naples Manor because the shifting soil bends the frame just enough to put stress on the welds at the rail-to-pickup joints. We grind out the crack, weld it back with proper penetration, and often add a gusset at the stress point so the same crack does not come back next season. Rail repair in Naples Manor usually runs $90 to $220 per section.
Custom Welding
Sometimes the best fix is not a replacement part at all. It is a bracket we cut and weld on the spot, or a custom hinge plate sized for a post that is just a little too far gone but still worth saving. Hal has been welding since 2001, and he would rather fabricate a repair than charge you for a part that was never going to fit right anyway. Custom welding in Naples Manor runs $80 to $200 on top of the base repair, and you see every weld before we leave the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Naples Manor
We are certified to service Ghost Controls, DoorKing, Elite, and Viking equipment, along with the other major brands you see on older Naples Manor automatic gates. If your operator’s limit switches are out of adjustment or your keypad stopped reading after the ground shifted, we diagnose the actual problem before recommending any part. We do not push a full operator replacement when a $30 sensor or a re-aligned hinge fixes the issue. And if your gate is older and has no safety sensors at all, we can add them while we are already doing a hinge or post repair in Naples Manor.
For residents near East Naples, Naples, Golden Gate, and Naples Park, we bring the same on-site service and the same printed promise. Our Gate Parts & Welding in Naples Manor team covers the whole 34112 ZIP and the surrounding communities without a trip charge inside the county.
Common Gate Parts & Welding Problems We See in Naples Manor Homes
- Post footing rust-through at the soil line. The bottom six inches of the post corrode from constant standing water and salt air while the visible gate panel looks untouched. The gate collapses at the anchor point without warning, which is why we recommend inspecting the base of every older post before wet season.
- Hinge binding after years of neglect. Naples Manor’s 1970s-era post anchors were never designed for decades of saturated soil and seasonal movement. Even when the gate panel is sound, the hinges bind and the gate sags at the hinge post, not in the middle.
- Auto-latch misalignment from shifting sandy soil. June through September flooding loosens the ground around post bases, and the latch plate moves a quarter inch. Suddenly your keypad entry works but the gate will not stay latched, or the operator throws an error on every cycle.
- Cracked rails and broken welds on semi-automated gates. The combination of salt corrosion and soil movement stresses the original weld joints on tubular steel gates. The cracks often start at the rail joint and spread into the pickup, making the whole panel flex.
Pricing for Gate Parts & Welding in Naples Manor, FL
A typical hinge replacement in Naples Manor runs $120 to $280 per hinge. Post replacement, the most common real-world job here, runs $280 to $650 per post depending on depth and whether the old footing has to be broken out. Rail repair runs $90 to $220 per section. Custom welding runs $80 to $200 on top of the base repair. These are honest ranges for Naples Manor’s market, not the inflated numbers you sometimes hear from companies that commute in from outside Collier County. We quote the exact price before any work starts, and that is the price you pay. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and describe what your gate is doing. We will give you a straight number over the phone.
We Also Serve Cities Near Naples Manor
We work across East Naples, Naples, Golden Gate, and Naples Park when Naples Manor residents refer us to a neighbor or a family member. The same on-site welding, the same upfront pricing, and the same 90-Day Done Right Promise apply wherever the gate is. If you are in any of those communities and the gate is leaning, call (877) 610-2993 and ask for a free estimate.
Serving Naples Manor, FL - Our Local Coverage Area
We’re based in the Naples Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Naples Manor
In most of Naples Manor, no. Unlike the gated communities in Naples proper and Lely, where architectural review boards regulate gate style, height, and finish, Naples Manor’s single-family homes fall outside HOA gate restrictions in the vast majority of cases. A repair that restores your existing gate, like a post replacement or hinge re-weld, does not change the gate’s appearance and rarely needs approval. If you do live in a small subsection of Naples Manor with covenant restrictions, we can help you document the repair as like-for-like maintenance. Call (877) 610-2993 and we will tell you what we have seen on your street.
It leans in summer because the sandy, organically-rich fill soil under your post foundations saturates with standing water from June through September, temporarily losing bearing strength. The post shifts slightly, the gate leans, and then the soil dries out and the lean sometimes partially corrects itself. The fix is not shimming the gate panel. It is resetting the post with a deeper concrete footing that extends below the zone that gets waterlogged. Call (877) 610-2993 and we will come look at the post base before it fails completely.
Yes, and this is the single most common repair we do in Naples Manor. The lowest six inches of the post corrode from perpetually moist, slightly acidic soil and salt air while the visible upper sections still look solid. We remove the gate, cut out the rotted section, set a new post in a deeper footing, and re-weld the hinges so the gate hangs true. If we catch it before the post collapses, the repair usually runs $280 to $650 per post. Call (877) 610-2993 for a free assessment of your post base.
Yes. Many Naples Manor gates from the 1980s and 1990s were installed before safety sensors became standard, and it is a good upgrade while we are already on site for a hinge or post repair. We add photo-eye sensors at the base of the gate opening and wire them into your existing operator, whether it is Ghost Controls, DoorKing, Elite, Viking, or another brand. The sensor addition typically runs $150 to $300 on top of the structural repair. Call (877) 610-2993 and we will price it as part of the same job.
Ninety percent of the time in Naples Manor, it is the gate alignment, not the keypad. When wet-season saturation shifts the post base even a quarter inch, the auto-latch no longer lines up with the strike plate, and the operator reads a fault on every cycle. The keypad is usually fine. We re-align the gate, adjust the latch, and re-set the operator’s limit switches, and the keypad works again. A re-alignment with latch adjustment in Naples Manor runs $100 to $200. Call (877) 610-2993 before you spend $400 on a new keypad you probably do not need.
Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on gate parts and welding in Naples Manor. A live person answers, day or night. We will give you a straight price, show up when we say we will, and put the 90-Day Done Right Promise in writing before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Naples Manor since 2001.