Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Midlothian
When a gate post heaves out of plumb on Blackland Prairie clay, or a hinge weld cracks on a driveway gate in Mockingbird Hills, you don’t have time to wait on a call center three states away. Gatewood Fence & Gate has been welding and repairing gates across Midlothian since 2001, and we answer the phone with a live person around the clock. Call (877) 610-2993 and Hal Gatewood or a member of his crew will walk you through what’s wrong and what it’ll take to fix it, right there on site.
Most of what we do in Midlothian is repair work other companies want to replace. We weld on site, in your driveway, so your gate never leaves the property. If it needs a new hinge, a re-set post, a re-welded rail, or a re-squared frame, that’s what we do. And every job carries our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Midlothian’s Preferred Gate Parts & Welding Company
Hal Gatewood started this business in 2001, and his name is still on the shop and on every invoice. That’s the oldest accountability there is. Our Midlothian customers know that if something isn’t right after we leave, one call brings him back. No runaround, no “we’ll open a ticket.” That promise is stamped on every job.
We’ve repaired enough gates in Midlothian to know the ground here. The clay swells in spring, shrinks in August, and posts that looked fine in March are tilting by September. We’ve seen the same worn hinge patterns across whole subdivisions, because so many of these iron driveway gates went in during the same mid-2000s building boom. The person who shows up at your gate doesn’t need a map to find Gate Parts & Welding in Midlothian work we’ve done before.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Calls are answered by a live person, 24/7. Not a voicemail, not a dispatch queue. When you call, you get someone who knows gates and knows Midlothian.
Our Gate Parts & Welding Services in Midlothian
Our Gate Parts & Welding team handles everything from a single hinge replacement to a full post reset and frame re-alignment. Here’s what we do most often around Midlothian.
Hinge Replacement
Hinges take the entire weight of the gate leaf, and around Midlothian they take extra abuse. When the clay shifts a post even a few degrees, the hinge barrel binds and the gate starts dragging on the latch side. We replace worn hinge barrels and re-align the leaf so the gate swings clean instead of sagging against the latch post.
Post Replacement
This is the defining repair call in Midlothian. Blackland Prairie montmorillonite clay swells and shrinks so aggressively that concrete footings crack, tilt, and lift within two to three wet-dry cycles. A gate sags in the hinge post, not in the middle, so that’s where we start. We dig out the old footing, set the post deeper with properly mixed concrete, and brace it while it cures so the gate stays square through the next rainy season.
Rail Repair
The horizontal rail carries the frame’s strength, and when a post heaves, the rail twists. Cracks start at the weld joints and spread through the picket attachment points. We re-weld cracked rails on site and, where needed, sleeve them with steel reinforcement so the gate doesn’t just look fixed, it is fixed. On slide gates along Highway 67, vibration from cement plant truck traffic fatigues these welds faster than most people expect, and we account for that.
Custom Welding
Not every repair fits a catalog part. When a hinge plate tears out of a box section, or a gate needs a new cross-brace or a custom latch plate, we fabricate it in the shop and weld it on in your driveway. For acreage gates and long farm entrances around rural Midlothian, we’ve built custom reinforcements and heavy-duty hinge barrels you won’t find at a big-box store.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midlothian
We’re certified to work on nine major gate operator brands, including LiftMaster, FAAC, BFT, Linear, and Viking. If your opener in Midlothian is binding because the post shifted or a weld cracked, we can usually repair the existing hardware instead of swapping it out. We carry common parts for these brands in our stock, which means less waiting when we come out to your property.
Common Gate Parts & Welding Problems We See in Midlothian Homes
- Clay heave tilts hinge posts out of plumb. The montmorillonite clay under Midlothian expands with spring rains and shrinks in summer drought. Swing gate leafs sag and bind on the latch post within a few seasonal cycles, even on gates that were installed correctly.
- Cement plant truck vibration along Highway 67 fatigues hinge welds. The constant rumble from loaded cement trucks loosens rack and pinion bolts and cracks weld joints on slide gates near those corridors, a failure pattern gate companies from sandy-soil suburbs rarely diagnose.
- Solar openers on acreage entrances fault on the safety photocell. When a post footing shifts on rural property, the photocell beam loses alignment and the opener faults, leaving the gate stuck open. The fix is the post, not the photocell.
- Hinge barrels wear out faster on ornamental iron driveway gates. The density of similarly aged iron gates across Midlothian’s master-planned subdivisions means we see the same hinge wear patterns neighborhood-wide, and we keep those parts on hand.
Pricing for Gate Parts & Welding in Midlothian, TX
Hinge replacement in Midlothian typically runs $180-$320 per hinge, including the labor to re-align the leaf. Post replacement runs $350-$750 depending on how deep we need to set the new footing and how much concrete the clay needs to stay put. Rail repair and re-welding usually lands between $150 and $400, and custom welding work starts around $120. Those are honest, real ranges for the work we do around Midlothian, not a lowball phone quote that changes at the door.
We quote every job before we start. You’ll know the price and agree to it in writing. We also offer $40 off any repair over $200, a free second opinion on any written estimate you’ve received, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for your free estimate, and you’ll have a real number before we ever step on site.
We Also Serve Cities Near Midlothian
Our crews cover Midlothian and the surrounding Ellis County area every week. If you’re in Cedar Hill, Mansfield, Glenn Heights, or Red Oak and need gate parts, welding, or post work, we come to you too, with the same live-answer phone line and the same 90-Day Done Right Promise.
Serving Midlothian, TX - Our Local Coverage Area
We’re based in the Midlothian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Midlothian
Look at the gap between the two gate leafs at the center, near the latch. If it’s wider at the bottom than at the top, or the gate drags on the latch post only after a rainy spell, your hinge post is tilting. In Midlothian, the clay swells enough in spring to move a post a full inch or more out of plumb. Call (877) 610-2993 and we’ll confirm it on site and quote the repair.
No. If the gate leaf is sagging, the post has moved or the hinges are worn, and a new LiftMaster opener will just bind against the same stuck gate. The operator is working against the sag. We fix the post and hinges first, then re-program the opener, and you save the cost of a new motor you didn’t need. We’ll tell you honestly which problem is the real one.
Yes, and that’s standard work for us. The vibration from truck traffic along Highway 67 cracks welds at the rail joints and loosens rack bolts. We grind out the crack, re-weld the joint, and reinforce the rail with steel plate where the metal has fatigued. Replacing the whole gate is rarely necessary, and we’ll show you exactly what we repaired and why it’ll hold.
When a post footing shifts on the clay, the photocell mounted on that post moves out of alignment with the reflector across the driveway. The beam breaks, the opener faults, and the gate won’t close or won’t open fully. The common mistake is replacing the photocell or the control board. We re-set the post, re-align the beam, and the fault clears. If your rural Midlothian entrance is doing this after the rains, call (877) 610-2993.
Yes. Heavy slide gates and pipe-frame farm gates on acreage eat rollers faster than residential gates, especially when the track settles or the post shifts. We replace worn rollers with heavy-duty steel units sized for the gate weight, check the track for level, and re-align the gate so it rolls without dragging. We’ll quote the roller replacement before any work starts.
If your gate is sagging, cracking, or stuck in Midlothian, call Gatewood Fence & Gate at (877) 610-2993. Hal or a member of his crew will answer, and we’ll schedule a time that actually works for you. Free estimate, written price before we start, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Midlothian since 2001.