Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Melissa
Gate parts and welding in Melissa, TX usually comes down to two jobs: a hinge post that’s moved in the Blackland Prairie clay, or a weld that needs to be made stronger than the original spec ever called for. We handle both same-week for most homeowners, and our shop is close enough that a trip charge usually isn’t even part of the conversation for properties inside the county. Hal Gatewood has been welding and repairing gates since 2001, and our Gate Parts & Welding crew shows up with a truck stocked for the work, not for a second visit. Call (877) 610-2993 and you’ll talk to a live person, not a phone tree.
If you live in Melissa and your gate is sagging, dragging, or the opener is grinding against a panel that’s not square anymore, the problem usually isn’t the part you think it is. It’s the post under it. More on that below.
Why Gatewood Fence & Gate Is Melissa’s Preferred Gate Parts & Welding Company
Melissa is different from most Collin County towns. The housing stock is nearly all built after 2010, which sounds like an advantage until you realize the Gate Installation - Melissa work and operators were spec’d by developers, not by anyone who’d ever swung a gate in August heat. We see the same failures over and over in neighborhoods off Milrany Lane, along Highway 5, and up in the newer sections north of 121. Hinge posts set in shallow concrete, operator arms undersized for the actual panel weight, and latches that bind because the column moved half an inch. That’s not a homeowner problem. That’s a Melissa problem.
Our reputation in Melissa is built on fixing what other companies wanted to replace. We weld on site, in your driveway, so the gate never leaves your property. Local reviews mention the same things: the person who answered the phone knew what a failing overhead trolley sounded like, the price on the quote was the price on the invoice, and when a follow-up was needed, it happened without a fight. Hal answers calls himself at 2 a.m. if that’s when your gate stops closing. That’s not a slogan. That’s how the shop has run since 2001.
Crews serving Melissa are coordinated from our Dallas-Fort Worth office, but the work is local, the parts are on the truck, and the same owner who answered the phone is the one who signs the invoice. You can look up our license number, our address, and our name. Hal Gatewood isn’t a brand. He’s the guy who’ll be under your gate with a welder.
Key Takeaways
- Most Melissa gate repairs start with a post, not the part that’s visibly broken.
- We weld on site, so your gate isn’t hauled off to some shop for a week.
- Upfront pricing, quoted and agreed before any work starts. No surprises at the door.
- 90-Day Done Right Promise in writing on every job.
- Live person answers, 24/7. Call (877) 610-2993.
Our Gate Parts & Welding Services in Melissa
Here’s the thing about Melissa: the gate stock is young, but the failures look like old gates. That’s because Blackland Prairie clay moves. It swells in wet winters, shrinks in dry summers, and that movement doesn’t care that your house was built in 2018. It shifts the footing, the post leans, and suddenly the gate drags. Here’s what we actually do most weeks across Melissa.
Hinge Replacement in Melissa
Hinge replacement in Melissa is rarely just a hinge swap. When a builder set a hinge post in a shallow pour and the clay heaved, the hinge itself may be fine while the post it’s welded to has moved. We replace the hinge or rebuild the hinge eye, but we also check what the hinge is mounted to. That’s the difference between a fix that lasts and a fix you’ll pay for again in eighteen months. Typical hinge replacement on a single residential gate in Melissa runs $140 to $320, depending on hinge weight class and weld time. If the post needs squared too, that’s a post job, not a hinge job.
Post Replacement in Melissa
This is the job we do most in Melissa, and the job most other companies quote as a full gate replacement. A lean of even an inch and a half at the top of a post becomes a gate that binds at the latch, drags at the far rail, and burns out an opener motor trying to push through it. Post replacement in Melissa typically runs $380 to $850 per post, including concrete removal, new footing poured to depth, and re-hanging the gate square. If the post is in an HOA masonry column, it’s more because the column needs to be worked around or partially rebuilt. We don’t cut corners there. A column repair that shifts again in two years isn’t a repair.
Rail Repair in Melissa
Rails crack. Usually at the weld points where the cross rail meets the vertical pickets, or where the top rail took a hit from a kid on a bike or a trash can in the wind. Rail repair in a Melissa gate usually runs $90 to $220 per rail, including grinding the old weld, re-welding, and touching up the finish. If the rail is bent beyond a simple weld fix, we’ll cut the section out and weld in a new piece rather than trying to bend it back. Heat-weakened steel fails again. We’d rather do the weld once.
Custom Welding in Melissa
Sometimes you need something that was never installed. A lot of Melissa homes were built with manual driveway gates, and the owner later decides they want Melissa Gate Motor & Opener automation. That means welding a motor mount plate, an arm bracket, and often reinforcing the gate frame so it can handle the torque. Custom welding in Melissa usually runs $150 to $500 depending on scope, and we’ve done everything from reinforcing a sagging gate frame to adding a pedestrian gate insert into an existing driveway panel. The weld isn’t the expensive part. Knowing where to put it is.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Melissa
We stock parts and service operators from Linear, Ghost Controls, and DoorKing, among others. For Melissa homeowners that matters, because a lot of the automated operators on HOA entry gates and driveway swings came from those three. We also handle Gate Access Control in Melissa systems tied to those operators. When a control board fails or an arm strips a gear, we don’t have to order the part and come back next week. The part’s already on the truck. We also see plenty of LiftMaster and Mighty Mule on residential gates around Melissa, and we service those too. The brand matters less than the weight of the gate it’s trying to move, which is exactly where developer-spec installs went wrong in the first place.
Common Gate Parts & Welding Problems We See in Melissa Homes
- Hinge posts leaning in shallow concrete. Builders set posts in a hole that’s too shallow for Blackland Prairie clay movement. Within two to three years the post is out of plumb and the gate drags. Post replacement with a deeper footing is the only fix that holds.
- Operator arms fighting overweight gates. Developer-spec operators were chosen by price, not by gate weight. In triple-digit heat, the motor runs hot and burns out early. We replace the opener with one rated for the actual load, and reinforce the gate frame if needed.
- Latch binding from column movement. Masonry columns on subdivision entry gates shift with the clay, and the latch no longer lines up. Grinding and re-welding the latch receiver is usually faster and longer-lasting than replacing the whole latch mechanism.
- No conduit run from the house to the gate. Builders often skipped the underground conduit that would let you add a keypad, loop detector, or safety photocells later. Adding those later means trenching through established landscaping. We handle the full run, including the concrete cut and patch if the driveway’s in the way.
Pricing for Gate Parts & Welding in Melissa, TX
Melissa’s gate repair pricing tracks with Collin County generally, but the clay soil means post work is a larger share of jobs than in cities with stable ground. Here are the ranges we quote most often for Melissa:
| Service | Typical Melissa Range |
|---|---|
| Hinge replacement (single gate) | $140 - $320 |
| Post replacement (per post, residential) | $380 - $850 |
| Rail repair (weld and finish) | $90 - $220 per rail |
| Custom welding (brackets, reinforcement, inserts) | $150 - $500 |
| Opener motor replacement (parts and labor) | $280 - $700 depending on brand and weight class |
| Conduit trench and run for future automation | $600 - $1,400 depending on distance and surface |
Every quote is given before work starts and agreed to before we cut or weld anything. We don’t quote on the phone and change it at the door. The price on the written estimate is the price you pay, and if we find something unexpected mid-job, we stop and call you before touching it. Free estimates across Melissa. Call (877) 610-2993 to schedule one.
We Also Serve Cities Near Melissa
If you’re in Anna, Fairview, McKinney, or Princeton, we run the same trucks, the same crew, and the same 90-Day Done Right Promise. Melissa is home base for this page, but we’re out in the surrounding cities weekly. If your gate is in one of those towns, Gate Parts & Welding in Melissa applies to you too, and the phone’s the same: (877) 610-2993.
Serving Melissa, TX - Our Local Coverage Area
We’re based in the Melissa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Melissa
Because the hinge post was likely set in shallow concrete, and Blackland Prairie clay doesn’t hold a shallow footing straight. The clay swells in wet months and shrinks in dry ones, the post moves, the gate drops, and it drags. We fix it by pouring a deeper footing and re-hanging the gate square, which is a post replacement, not a hinge adjustment. Call (877) 610-2993 for a free estimate on the post work.
Yes. The right way to do it is to trench and run conduit underground from the house to the gate, then patch the surface. It’s more work than clipping a wire across the grass, but it won’t get mowed over or trip anyone, and your HOA won’t write you a letter about it. Typical conduit runs in Melissa run $600 to $1,400 depending on distance and what’s in the way. We quote it before we dig, and the price is fixed before work starts. Call (877) 610-2993.
My neighborhood’s decorative masonry entry gate is creaking and the operator seems weak - can you weld new hinges without replacing the whole column?
Usually yes. The creak usually comes from the hinge post shifting inside or behind the masonry, or from the hinge pin itself wearing out of round under a gate that’s heavier than the operator spec. We can weld new heavy-duty hinges onto the existing steel without tearing down the column, and we’ll also check whether the operator is undersized for the actual gate weight. That’s a common combination in Melissa subdivisions built after 2015. Call (877) 610-2993 and we’ll come look at the column.
That depends on why it jumped. If the track has settled in the clay, the fix starts with leveling the track or its footing, then welding the rail or roller bracket back to spec. If the gate frame has racked, we weld reinforcement plate at the stress points, usually the corners and the roller mounts. A slide gate that jumps once will jump again if you just lift it back on. The weld has to address why it left the track. Call (877) 610-2993 for a free look at the track and rollers.
Does your post replacement service include fixing the safety photocells and loop detector connections on a rebuilt gate?
Yes. Any time we pull a post or rebuild a gate frame, we test the safety photocells and loop detector connections before we leave. If they were damaged by the same ground movement that took out the post, we repair or replace them as part of the job and the revised quote. An automated gate that doesn’t stop for a child or a car is a liability, not just a broken gate. We test everything before the job’s done, and the 90-Day Done Right Promise covers it all in writing. Call (877) 610-2993 to schedule.
Call Gatewood Fence & Gate for Gate Parts & Welding in Melissa
If your gate is sagging, dragging, or the opener is grinding in any Melissa neighborhood, call (877) 610-2993. Hal answers the phone. The quote is free, the price is fixed before work starts, and the job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. That’s been the deal since 2001, and it’s not changing for Melissa.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Melissa and the surrounding Collin County communities since 2001.