Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Mead
Gate parts and welding in Mead usually means one of two things: a hinge post that’s finally given out after years of freeze-thaw cycling, or a slide gate that’s jumped its track because frost heave moved the rail a half-inch. Either way, we fix it on-site, and we fix it so it stays fixed. Hal Gatewood has been doing exactly this since 2001, and the crew that shows up at your driveway knows Mead’s basalt soil, its long gravel drives, and its March thaw. If your gate is dragging, binding, or sagging, call (877) 610-2993 and you’ll reach a live person, not a voicemail.
We’re the Gate Parts & Welding crew that welds in your driveway instead of hauling the gate to some shop across the county. You get the 90-Day Done Right Promise in writing, and you get Hal’s name on every invoice.
Why Gatewood Fence & Gate Is Mead’s Preferred Gate Parts & Welding Company
People in Mead tend to hear about us from neighbors. That’s how it works out here. You ask who fixed the Johnson’s gate over on Green Bluff Road, and somebody says, “Call Hal.” We’ve earned that by showing up when we said we would, welding the part that needed welding, and not inventing parts that didn’t need replacing. Our repair-first philosophy bugs a lot of big companies because they’d rather sell you a whole new gate. We’d rather you keep the gate you have.
Mead is unincorporated and spread out. The properties are half an acre, three acres, sometimes ten. That changes the kind of gate problems you see. Ranch-style swing gates, long slide gates on gravel, shared driveways and easements. We understand those conditions because we work in them every week. We’re not dispatching someone from three hours away who’s never seen basalt heave. Scheduling and dispatch are coordinated from our Seattle office, but the crew that pulls into Mead lives and works here. We answer calls 24/7. No phone tree.
Our Gate Parts & Welding Services in Mead
These are the four services we handle most often in Mead. Every one starts with a straight answer about what’s wrong and what it costs to fix. You’ll get the price before any work starts, and that’s the price you’ll pay.
Hinge Replacement
On Mead’s older properties, the original gate hinges were often undersized for the gate they were asked to carry. Add frost heave and a post that’s slowly leaning back, and those hinges take load they were never designed for. We replace them with heavy-duty adjustable hinges, welded or bolted to a post we’ve confirmed is still sound. If the post isn’t sound, we don’t hang the hinge. See Post Replacement below.
Post Replacement
Hinge posts in Mead fail at ground level. It’s not mysterious. The post was set without enough concrete, the footing didn’t go below Spokane County’s roughly 24-inch frost depth, and twenty winters of heaving finally won. We cut out the old footing, auger a new hole below the frost line, set a steel post in concrete, and weld the hinges back on plumb. Fix the hinge without fixing the post and you’ll fix it twice. We say that to customers all the time because it’s true.
Rail Repair
Slide gates in Mead live hard. Gravel dust, snow, and freeze-thaw torque the top and bottom rails until welds crack or the rack-and-pinion drive binds. We repair rails on-site, straighten what can be straightened, and weld reinforcements where the original fabricator skimped. If a section of rack is stripped, we can often weld a new section in without pulling the whole rail.
Custom Welding
Sometimes the gate you have was never quite right for the opening it sits in. Or a previous owner jury-rigged a latch, an extension, or a motor mount. We design and weld what the gate actually needs: custom hinge plates, motor brackets, drop rods, strike plates, gate extensions for sagging corners. It’s real fabrication work, done in your driveway with a mobile welder, by people who have been welding since long before it was a side hustle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mead
We are certified to service nine major gate opener brands, so if your automation is acting up in Mead, we can handle it. The ones we see most on Mead properties are LiftMaster, Ghost Controls, and DoorKing; we also work on Viking and Elite regularly. Here’s the practical part: we keep common rollers, brackets, hinges, and rack sections on the truck. That means fewer trips back to the warehouse and fewer days with your gate propped open. When a Mead customer calls Tuesday about a lift-gate roller that’s chewed up from gravel, we want a new one on the truck Wednesday.
Common Gate Parts & Welding Problems We See in Mead Homes
- Hinge post lean from basalt heave. Mead’s soil is rocky, and the basalt underneath doesn’t drain like soft loam. When water gets under a shallow footing and freezes, it lifts. Posts set 18 or 20 inches deep heave every season. You’ll see the gate start to drag in March.
- Slide gate rollers jumping the track. Frost heave doesn’t move uniformly. One side of the track lifts a quarter inch while the other stays put. The carriage twists, the roller walks off the rail, and the gate jams halfway open. We see this after every hard freeze.
- Rack-and-pinion bind. When the post holding the rack shifts, the pinion gear stops meshing cleanly. It grinds, slips, or stalls the motor. Continuing to run the opener just chews up the rack teeth faster.
- Sag correction jobs that fail within a year. The hinge post was rotted or leaning, but only the panel got adjusted. In Mead’s climate, that’s a one-year patch. Reset the post, then align the gate. That’s the order.
Pricing for Gate Parts & Welding in Mead, WA
Here are honest numbers for Meh. Hinge replacement on a standard swing gate typically runs $180 to $340, depending on hinge size and whether we’re welding or bolting. Post replacement in Mead’s basalt soil, with augering below the 24-inch frost line and a new concrete footing, generally runs $450 to $900. Rail repair or welding a cracked joint is usually $150 to $400. Custom welding work, like fabricating a new motor mount or reinforcing a rack section, runs $120 to $80 per hour plus materials, and most jobs land in the $200 to $600 range. Every price is quoted and agreed before we start. You won’t get a surprise invoice at the door. Call (877) 610-2993 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside Spokane County.
We Also Serve Cities Near Mead
We work throughout the Mead area and the surrounding communities, including Country Homes, Dishman, Spokane, and Spokane Valley. If you’re on the edge of Mead in 99021 or a mile into Spokane, same crew, same promise, same phone number.
Serving Mead, WA - Our Local Coverage Area
We’re based in the Mead area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Mead
Because the hinge post is moving, not the hinges. Tightening the bolts doesn’t fix a post that’s being lifted by frost heave in Mead’s basalt soil. When the ground thaws each March, the post settles back at a slightly different angle, and the gate sags again. The fix is resetting the post below Spokane County’s 24-inch frost depth in a proper concrete footing. Call (877) 610-2993 and we’ll confirm whether the post or the panel is the real problem.
We can often weld a new section of rack onto the existing rail. A broken tooth or a stripped six-inch section doesn’t require replacing the entire rack. If the rail itself is twisted or rusted through, we’ll tell you that too. We’d rather weld a $40 section than sell you a $400 rail you don’t need. Call (877) 610-2993 and we’ll look at it.
We stage the work. On a shared righ-of-way, we pull the gate panel only after the new post hole is augered and the concrete is mixed. The gate is off its pins for a few hours, not a few days. Pedestrians use the same gap they always do; vehicles just swing a little wider. We’ve done this on Mead properties where three families rely on one driveway, and we don’t leave the access blocked at the end of the day. Call (877) 610-2993 and we’ll walk you through the sequence before we start.
Usually it’s a failing battery in the keypad that’s weak enough to drop voltage in cold weather, or a cracked keypad housing letting moisture in that freezes overnight. If the opener itself is lagging too, it could be a low-voltage transformer issue or a control board on its way out. We test the keypad under load onsite and replace either the battery or the housing before we blame the operator. Call (877) 610-2993 and we’ll check it the same week.
It depends on the gate type and how you use it. On a swing gate with a long Mead gravel driveway, a loop detector prevents the gate from closing on a car that’s creeping in slowly, especially in winter when visibility is low and tires spin. If the gate is used almost entirely by the same two or three vehicles, many homeowners skip it and rely on manual prompt from a remote. But on shared driveways or heavy-traffic rural properties with visitors, a loop detector is worth the cost. We’ll tell you the truth either way.
Contact Gatewood Fence & Gate in Mead
We answer the phone around the clock. Not a service. Not a call center. A live person who can talk to you about your Mea gate problem and get you on the schedule. Call (877) 610-2993 for a free estimate on hinge replacement, post replacement, rail repair, custom welding, or any gate part that’s giving you trouble. Hal Gatewood’s name is on the shop, and he keeps his word. The 90-Day Done Right Promise is in writing. It’s that simple.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mead since 2001.