Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across McKinney
Gate parts and welding in McKinney usually means one of two things: a homeowner’s driveway gate that’s sagging or rusted through, or a community entry gate that an HOA board needs fixed yesterday. We handle both. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still answers the phone himself. If you live in McKinney, TX and your gate won’t close, your hinges are screaming, or a post has shifted out of plumb, call (877) 610-2993 and you’ll talk to a live person. We weld on site, we stock the parts that McKinney gates actually use, and we quote the price before any work starts.
Why Gatewood Fence & Gate Is McKinney’s Preferred Gate Parts & Welding Company
McKinney isn’t a town where you can afford to send a stranger who doesn’t understand the local rules. We work inside Stonebridge Ranch, Craig Ranch, Eldorado, and dozens of smaller gated subdivisions every month. That means we know what the HOA architectural committees in McKinney will approve, what they’ll reject, and how to save you from paying for a repair twice because a board sent you back to the drawing board. Hal Gatewood has been doing this since 2001, and his name is on the shop and every invoice. The address is published. The license number is published. That’s the accountability a McKinney homeowner should expect.
Our customers in McKinney keep calling us back because we fix the gate in place. We don’t haul a panel to a shop, weld on a patch, and bill you for shipping. Hal or one of his crew shows up in a marked truck, welds the hinge or post right there in your driveway, and tests the gate before we leave. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround. No voicemail. A live person answers around the clock. That matters in McKinney, where a community gate that won’t open during morning rush hour affects every resident behind it.
Our work in this area is built on a simple rule: Gate Parts & Welding is repair work first. If the hinge post is still sound, we weld on a new hinge barrel and stop there. If the operator is fine and the rack is worn, we replace the rack. You won’t find us upselling a full gate replacement when the fix is two welds and an hour of labor. That philosophy is why McKinney HOAs and homeowners call us before the national outfits. We’re McKinney local in the way that counts: we know the soil, the HOA workflows, and the difference between a LiftMaster actuator that needs a rebuild and one that needs to go in the scrap pile.
Our Gate Parts & Welding Services in McKinney
Post Replacement
McKinney sits on Blackland Prairie clay, and that clay hates gate posts. It swells when it rains and shrinks when it dries, and over a fifteen-year window it will walk a post out of plumb even if the winter never freezes. Post replacement here almost always involves digging a deeper, wider footing than the original builder poured, welding a new steel post to the gate frame, and re-locating the hinges. In Stonebridge Ranch and Eldorado we regularly match the original ornamental finish so the HOA board signs off on the first submittal. A typical post replacement in McKinney runs $450 to $1,100 depending on gate size, soil conditions, and whether we’re also resetting the operator mount.
Hinge Replacement
A sagging gate usually isn’t a bent panel. It’s a hinge that’s worn oval or a post that has shifted. We replace hinges on ornamental iron driveway gates all over McKinney, including the heavier 14- and 16-foot entries in Craig Ranch. We weld the new hinge in place, shim the gate to a true level, and re-align the latch so it engages cleanly. Hinge replacement for a standard single driveway gate in McKinney usually runs $180 to $420. If the hinge post itself has moved, we address that first; fixing the hinge without the post means you’ll fix it twice.
Rail Repair
Bottom rails on iron gates catch water, salt from de-icing, and years of McKinney humidity. They rust from the inside out. We cut out the rotted section, weld in new matching steel, and grind the repair smooth enough that the HOA’s finish submittal won’t get bounced. This is real fabrication work, not a bolt-on patch. Most rail repairs in McKinney run $220 to $650 per rail, depending on length and whether the rust has spread into the pickets. We’ll tell you honestly if the rail is beyond saving; sometimes a full panel rebuild is cheaper than chasing rust.
Custom Welding
McKinney’s gated communities don’t all use the same gate style, and after twenty years some of those original builder-spec gates are no longer in production. We fabricate replacement sections, extend posts, build custom latch brackets, and repair operator mounts on site. We’ve matched the scrollwork on Eldorado entries and re-created bottom rails for Stonebridge Ranch gates that no catalog carries. Custom welding in McKinney typically runs $300 to $900 per project, quoted before we strike an arc. And because we weld on site, your gate never leaves your property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McKinney
McKinney’s housing boom in the 2000s and 2010s put a lot of automated gates in the ground, and the operators on those gates are now hitting their 15 to 20 year service window. We service and rebuild Viking, Ghost Controls, and DoorKing operators every week in McKinney, and we stock the common replacement parts for those brands on the truck. We also service Elite actuators, which show up on a lot of community slide gates in this area. When a part isn’t on the truck, we can usually have it in hand the next day because our parts suppliers are in the metro area. That keeps your HOA board from waiting two weeks on a national chain’s box store run.
Common Gate Parts & Welding Problems We See in McKinney Homes
- Shifted posts from expansive clay. The Blackland Prairie soil under McKinney swells and shrinks like a sponge, and it moves gate posts without any help from a freeze. We see this most in the 2000s-era communities where builders poured shallow footings.
- HOA finish mismatches. Stonebridge Ranch and Craig Ranch both enforce architectural standards on gate repairs. We’ve seen boards reject off-the-shelf black powder coat because it didn’t match the original iron finish. Matching the finish before the submittal goes in saves weeks of delay.
- Cluster failures on shared entry systems. When a community slide gate with keypad entry and loop detectors fails, it fails at the worst possible hour. A worn rack, a dead actuator, or a corroded limit switch takes down gate access for every resident inside. We prioritize these calls.
- Rusted hinge barrels on ornamental iron. McKinney’s humidity and occasional ice storms work together to rot hinge barrels from the inside. The gate looks fine until the hinge snaps and the gate drops. We inspect hinges on every parts and welding call we run in McKinney.
Pricing for Gate Parts & Welding in McKinney, TX
We quote every McKinney job before we start, and that price is what you pay. No trip charge inside the county, and $40 off any repair over $200. Here’s what you can expect for common gate parts and welding work in McKinney:
- Hinge replacement (single gate): $180 to $420
- Hinge replacement (double gate or 14+ ft leaf): $350 to $650
- Post replacement (driveway gate): $450 to $1,100
- Post replacement (community entry gate): $900 to $2,400
- Rail repair (per rail): $220 to $650
- Custom welding / fabrication: $300 to $900 per project
- Operator mount re-welding: $150 to $350
These are honest ranges for McKinney’s market. Community-scale gates cost more because the steel is heavier, the operator has to be disconnected and re-set, and the access control wiring needs to be re-verified. Call (877) 610-2993 for a written estimate. We’ll come look, measure, and hand you a number that won’t change at the door.
We Also Serve Cities Near McKinney
Our crews work across McKinney and the surrounding Collin County communities every day. If you’re in Fairview, Melissa, Allen, or Princeton and need gate parts or on-site welding, we’ll make the drive and bring the welder. Same pricing, same 90-Day Done Right Promise, same live person answering the phone.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in McKinney
Yes, and you need it in writing before the work starts. Stonebridge Ranch has architectural control that covers perimeter gates and community entry points, and the board reviews material, finish, and post style. We’ve done enough work in Stonebridge Ranch to know what passes review, and we’ll help you put together a submittal the board will approve the first time. Call (877) 610-2993 and we’ll walk you through what your specific community requires. The estimate is free.
McKinney’s soil is Blackland Prairie clay, and it doesn’t need a freeze to move. The clay swells during wet springs and contracts during dry summers, and over a decade that cycle slowly pushes a post out of plumb. We see shifted posts all over McKinney, especially in the early Stonebridge Ranch and Eldorado sections where footings were poured shallower than they should have been. The fix is a deeper footing and a new post, welded in place. Post replacement in McKinney runs $450 to $1,100 for most driveway gates. Call us for an exact quote.
Yes. Craig Ranch’s architectural standards mean we can’t just slather on any black paint. We match the original iron finish by taking a sample from your gate back to our supplier and color-matching before we weld. When the repair is done, the new section blends with the old. We’ve matched enough Craig Ranch gates to know the board will check, and we’d rather spend the extra day getting the finish right than have your repair bounced by the HOA. Estimates are free.
Usually, yes. When the keypad and loop detectors are working but the gate won’t move, the problem is generally mechanical: a worn rack and pinion, a dead actuator, a corroded limit switch, or a chain that’s jumped the sprocket. We’ll diagnose the failing part, quote the replacement, and do the repair so McKinney residents aren’t stuck in a line of cars at the entry. Community gate parts and welding jobs in McKinney run higher than residential because the steel and operators are larger, but we’ll give you a written price before any work begins. Call (877) 610-2993 for same-day troubleshooting.
UL 325 is the safety standard that requires any automated gate to have entrapment protection: photoeyes, reversing edges, or both, so the gate can’t crush or pin a person or vehicle. If your Eldorado gate is getting new parts or a new operator, the repair has to meet UL 325. We won’t leave a community entry gate or a driveway gate without re-testing the safety sensors after any weld or parts replacement. That’s a legal and safety requirement, not an upsell. Call us if your gate’s reversing edge is cracked or the photoeye has been knocked out of alignment. Estimates are free and we quote before we work.
Get Your Gate Running Again in McKinney
If your McKinney gate is sagging, binding, rusted through, or stuck open, we can usually get to you the same day. Hal Gatewood has been doing this since 2001, and he still welds on site and stands behind the work. Call (877) 610-2993 for a free estimate. You’ll get a live person, a straight answer, and a price that doesn’t change when we show up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving McKinney since 2001.