Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Martinsville
If your gate drags on the gravel, swings into the fence line, or stopped latching sometime last winter, we can get it working again. Gate parts and welding in Martinsville call for a different kind of attention than newer suburbs get, because a lot of the gates around here aren’t the kind you order from a catalog. They’re older. They’re heavier. They’re hung on posts that have been through decades of Morgan County frost heave. We stock the common hardware, fabricate what we can’t stock, and weld on site so your gate never leaves your driveway. Call (877) 610-2993 and tell me what it’s doing, or not doing. I’ll tell you straight what the fix should cost before we touch anything.
Why Gatewood Fence & Gate Is Martinsville’s Preferred Gate Parts & Welding Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and his name is on the shop and every invoice. That’s not a marketing line. It means when you call about a gate repair in Martinsville, the person who answers knows what a Morgan County clay problem looks like and has probably fixed three of them that week. We have an Indianapolis office that coordinates scheduling, but the crews serving Martinsville work local jobs regularly, so you’re not waiting on somebody driving in from another state who’s never seen a frost-heaved hinge post.
We repair before we replace. A lot of companies will look at a sagging steel gate, shake their head, and quote you a new one. We look at the hinge post, the barrel hinges, the latch alignment, and then we weld what’s broken and leave the rest alone. If the post is the problem, we say so. If the panel is still good, we keep it. That’s the only way we’ve operated for over two decades, and it’s why Martinsville homeowners call us back when the next gate on the property needs attention. Our standing offers apply here: $40 off any repair over $200, a free second opinion on any written estimate you’ve gotten from someone else, and no trip charge inside the county. Seniors and veterans get a permanent 10% discount, no expiration.
Our Gate Parts & Welding Services in Martinsville
Most people don’t know what’s actually wrong when a gate stops working. They just know it’s heavy, it’s not sitting right, and the latch won’t line up. Here’s what we do most often in the 46151 area.
Hinge Replacement
Hinges fail before posts fail. That’s true everywhere, but around Martinsville it’s especially true on older farm gates and 1970s tube-steel installations where the original strap hinges have spent forty or fifty years in Indiana weather. We cut off the corroded hardware, fit new barrel or strap hinges sized for the gate’s actual weight, and weld them in place. We don’t impose a hinge that fits “close enough.” The new ones get set so the gate swings true from the hinge post, not from wherever the panel has sagged to.
Post Replacement
Morgan County clay is the defining enemy of gate posts. Freeze-thaw cycles lift and tilt even well-set posts out of plumb every few winters, and once a post leans, the gate will never close right no matter how many times you adjust the latch. We dig out the old post, correct the base with proper depth and drainage, and set the new post in concrete. For wooden post-and-board setups near the older neighborhoods off Washington and Morgan Street, we match the existing lumber size and profile so the repaired section doesn’t look patched.
Rail Repair
Rails are the horizontal members that hold the gate panel together, and on welded steel gates around rural properties east of town, we often find cracks at the weld joints where the rail meets the upright. A cracked rail makes the whole panel flex and eventually pull the hinges out of alignment. We grind the crack clean and re-weld it, usually with a small gusset plate if the original design didn’t have one. On wooden gates near downtown’s older Victorian properties, we replace rotted rail sections and re-secure the pickets so the gate stays square.
Custom Welding
Some gates can’t be fixed with off-the-shelf parts because they weren’t built with off-the-shelf parts. That’s where custom welding comes in. We fabricate hinge straps, latch brackets, drop rods, and reinforcement plates right on site. If a hinge mount has rusted off a tube-steel frame, we weld a new one on in your driveway. You don’t haul the gate anywhere. You don’t wait a week for us to “get it back to the shop.” The welding happens where the gate hangs, and we test the swing before we pack up.
For a broader look at the full scope of this work across the region, see our Gate Parts & Welding service page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Martinsville
We’re certified to service nine major gate opener and automation brands, and around Martinsville we see a lot of older Linear systems on subdivision gates, Viking operators on rural driveway entrances, and Ghost Controls units on newer vinyl privacy gates. We also work on DoorKing equipment regularly. The certification matters because these systems have different board layouts, different entrapment protection requirements, and different failure patterns. We keep common parts and sensors on the truck, which means most repairs around Martinsville go from diagnosis to done in a single visit rather than a “let me order that and come back” routine.
Common Gate Parts & Welding Problems We See in Martinsville Homes
- Frost-heaved hinge posts that throw the gate out of plane. Heavy Morgan County clay holds water, and when it freezes it expands enough to lift concrete post footings. The gate still looks straight, but the latch misses by an inch and the free end drags. We reset the post and re-hang the hinges.
- Corroded strap hinges on older farm gates. On rural roads feeding into Martinsville from the east and south, we still find tube-steel farm gates swinging on hedge-post corner posts from the 1970s. The posts are basically indestructible. The original strap hinges, not so much. We fabricate weld-on replacements and leave the good hedge posts alone.
- Obsolete control boards on 1990s automatic openers. Legacy swing gate operators from that era had no modern entrapment protection and their boards fail without warning. Sometimes a retrofit with current safety sensors makes sense. Sometimes the cheaper long-term answer is a new operator with modern boards. We walk you through both costs up front.
- UV-brittle plastic hinges on vinyl privacy gates. Subdivisions built in the 2000s and 2010s for Indianapolis commuters got a lot of vinyl fencing with plastic hinge sets. Ten or fifteen years of Indiana sun and those hinges snap clean off, leaving panels hanging from one corner. We replace them with proper metal hinge hardware re-mounted through the vinyl’s internal supports.
Pricing for Gate Parts & Welding in Martinsville, IN
You should know what to expect before anyone shows up. Here are honest ranges for the work we do most in this area.
- Hinge replacement: $150 to $375 depending on gate size and number of hinges being cut off and re-welded.
- Post replacement (single post, dug, set in concrete, re-hung): $300 to $650 depending on depth, concrete required, and whether old concrete needs broken out first.
- Rail repair (weld or section replacement): $125 to $400 depending on crack length and whether we’re adding reinforcement plate.
- Custom welding (fabricated hinge strap, latch bracket, or similar part on site): $75 to $250 per fabricated piece, plus labor.
The price gets quoted in writing and you approve it before work starts. What you approve is what you pay. In the Martinsville market, proximity matters: we don’t charge a trip fee inside Morgan County, and if your repair goes over $200 you get $40 off automatically. If another company wrote you an estimate you’re not sure about, bring it to us for a free second opinion. Call (877) 610-2993 and we’ll walk through the numbers on the phone first.
We Also Serve Cities Near Martinsville
While this page focuses on Gate Parts & Welding in Martinsville, our crews regularly work in Mooresville, Plainfield, Bargersville, and Greenwood. If you’re just outside town, we can usually get to you just as quickly. Ask when you call, and we’ll give you an honest window.
Serving Martinsville, IN - Our Local Coverage Area
We’re based in the Martinsville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Martinsville
Because Martinsville sits on Morgan County clay that absorbs winter moisture and heaves when it freezes. The ground lifts the concrete footing, and when it thaws the post settles back a little more tilted each time. This is the most common gate repair we do in the 46151 area, and the fix is resetting the post at the correct depth with proper drainage so water doesn’t sit against the footing. Some neighborhoods near the White River corridor see this worse than others. Call (877) 610-2993 and we’ll tell you if a reset will fix it or if the footing itself needs to be redone.
Almost always, yes. Hedge posts from the 1970s or older are incredibly durable, and there’s rarely a reason to remove one. We cut off the old corroded strap hinges, fabricate new weld-on replacements sized for the gate’s weight, and weld them to the steel frame. On a rural road east of Martinsville, our crew did exactly this on a tube-steel farm gate still hung on Osage orange corner posts. The original hinges had rusted through. We built custom replacements and reset the sagging gate to swing true without disturbing those posts. We can do the same for your setup.
It depends on the specific opener. If it’s a brand like Linear or Viking with a strong motor and the failure is in the control board, we can often retrofit a modern board with proper entrapment protection and get years more out of the operator. If the motor itself is failing or parts are no longer manufactured, the honest answer is usually replacement. We’ll tell you which one applies to your system, with prices for both paths, before you spend anything. Call (877) 610-2993 and we’ll walk through what you have.
By fixing the part that’s actually failing, which is usually the hinge post or the hinge hardware, not the panel. A gate sags in the hinge post, not in the middle. We check the post for plumb first. If it’s leaning from frost heave, we reset it. If the post is solid, we replace the hinges and re-align the latch. Either way, the panel usually stays. That’s the whole repair-first approach: fix the panel without the post and you’ll fix it twice.
Yes, we weld steel gate frames on site throughout the Martinsville area, including rural properties along the county roads feeding in from the east and south. Cracks at rail-to-upright welds are common on older farm gates, and we grind them clean, re-weld, and often add a small gusset plate if the original design lacked one. The gate stays on your property the whole time. No hauling, no waiting, no shop fees.
Call Gatewood Fence & Gate for Gate Parts & Welding in Martinsville
If your gate leans, drags, won’t latch, or has a broken weld, call (877) 610-2993. A live person answers, day or night, and we’ll tell you what we think the problem is and what it should cost to fix it. Every job carries our 90-Day Done Right Promise in writing, and the price we quote is the price you approve before we begin. The name on the invoice is Hal Gatewood’s, and he’s been doing this since 2001. That matters when you’re deciding who to trust with your property.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Martinsville and Morgan County.