Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Marco Island
Gate parts and welding on Marco Island is a different job than it is twenty miles north in Naples. The salt here doesn’t take breaks. It comes off the Gulf, off the estuaries, off the canals behind your house, and it works on hinges, posts, and welds every single day. We’re Gatewood Fence & Gate, and we’ve spent years learning exactly how this island eats gate hardware. If your gate sags, binds, or won’t close square, call Hal at (877) 610-2993 and we’ll tell you straight what’s wrong and what it costs to fix.
Why Gatewood Fence & Gate Is Marco Island’s Preferred Gate Parts & Welding Company
We’re not a national outfit. Hal Gatewood started this company in 2001 and his name is on every invoice, every job folder, and the shop itself. When a Marco Island homeowner calls us about a gate dragging on its hinges or a weld cracking through an ornamental iron panel, the person who answers is a live person who knows gates.
Our crews work on Marco Island regularly, and they know what they’ll find before they even park the truck. In the older neighborhoods off Collier Boulevard, they expect the Deltona-era gates. On the canal-front estates off San Marco Road, they expect operator wiring that’s been breathing salt mist for a decade. We answer our phone 24/7, which matters when a hurricane warning has your gate swinging loose on one hinge at 9pm.
Every job carries a 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround. Marco Island residents also get a free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Marco Island
We stock and replace the parts other companies tell you need a full new gate. Most times they don’t. Here’s what we handle most often on the island.
Hinge Replacement
On Marco Island, hinge replacement is usually a corrosion job. Steel hinge pins inside aluminum gate frames set up galvanic corrosion, and within a few hurricane seasons the pin seizes or snaps. In the 34145 and 34146 zip codes, we typically replace hinge pins and leafs with marine-grade stainless or coated hardware so the same failure doesn’t come back in three years. A gate that swings free and silent starts with the hinge.
Post Replacement
A gate sags in the hinge post, not in the middle. On canal-front lots, the hinge post is the first thing the salt destroys. We cut the old post at grade, weld in a new marine-grade stub with a reinforced footing, and remount the gate square. If your Marco Island gate has dropped half an inch at the latch side, don’t shim the panel. The post is telling you something. Fix the post and you fix the gate once.
Rail Repair
Wrought-iron and aluminum gate rails on Marco Island crack at the welds, especially on drive gates that catch wind off the Gulf. We weld rails on site so the gate stays in your driveway and keeps its original look. On an island where most homes are 1970s and 1980s originals, that matters.
Custom Welding
When an ornamental iron gate has a broken scroll or a rusted-through lower rail, we fabricate the replacement piece and weld it in to match. Custom welding is where we fix what another company would tell you to throw away. If you own a bespoke gate on Marco Island, you already know how hard it is to find someone who will repair it correctly rather than sell you a new one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marco Island
Our Gate Parts & Welding work covers parts and hardware for the operators Marco Island homes actually run: Viking, DoorKing, Elite, Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We carry common hinge pins, rollers, and latch hardware for most of these on the truck, which means less waiting around when a Marco Island gate stick in the open position on a Friday afternoon.
Common Gate Parts & Welding Problems We See in Marco Island Homes
- Galvanic corrosion between steel hinge pins and aluminum frames. This seizes swing gates within a few hurricane seasons. The pin welds itself to the frame with white oxide, and the gate won’t budge.
- Salt-laden air wicking into underground conduit. It rots operator wiring from the inside out, causing intermittent keypad entry and loop detector faults. The gate works Tuesday and won’t open Wednesday.
- Storm surge racking gates off their posts. A direct hit bends the hinge post, cracks the footing, and leaves the gate hanging cockeyed. By the time it’s bent, it’s a structural job, not an adjustment.
- Original 1980s iron gates failing in batches. In the older Deltona-era neighborhoods, entire HOA-managed streets are cycling through original gates installed the same decade, all rusting at the footing at roughly the same time.
Pricing for Gate Parts & Welding in Marco Island, FL
You’ll get an exact price before any work starts. We quote it, you approve it, and that’s the number on the invoice. On Marco Island, a typical hinge replacement with marine-grade hardware runs $180 to $340. Post replacement, where we cut at grade and weld in a new stub with a reinforced footing, runs $450 to $900 depending on post depth and gate weight. Custom welding repairs on ornamental iron typically fall between $150 and $500, with most rail cracks and scroll replacements landing in the $200 to $350 range. Heavy bespoke gates on canal-front estates run higher because the fabrication is heavier and the corrosion damage is deeper. Call (877) 610-2993 for a free estimate. We’ll tell you the number before you commit.
We Also Serve Cities Near Marco Island
We serve all of Marco Island, including the neighborhoods off Collier Boulevard, San Marco Road, and Bald Eagle Drive. We also work in Marco, Naples Manor, East Naples, and Naples. If you’re within a short drive, there’s no trip charge inside the county.
Serving Marco Island, FL - Our Local Coverage Area
We’re based in the Marco Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Marco Island
Because the island’s salt exposure is omnidirectional. You’re surrounded by the Gulf on one side, estuaries on the other, and saltwater canals running through your neighborhood. Salt mist reaches hinge pins and posts from every direction, every day. A hinge that lasts 20 years in Naples can seize or snap here in 5 to 7 years. Call (877) 610-2993 and we’ll tell you if yours can be saved or needs replacement.
Yes, in most cases. We weld on site so the gate stays mounted and keeps its alignment. If the crack runs into a hinge or the post itself, we’ll explain what needs to come apart and why before we take anything off. Call (877) 610-2993 for a free estimate on the weld.
You’ll see the gate sag toward the latch side, and the gap at the top hinge will be wider than the gap at the bottom. The panel itself rarely bends without an impact. If the gate droops, the post is moving. On Marco Island that usually means corrosion at the footing. We’ll cut the post at grade if the base can be saved, or replace the whole post if it can’t. Call (877) 610-2993 and one of us will come look.
It means your automatic gate has safety features that stop and reverse the gate if something is in the way while it closes. On Marco Island, salt corrosion can disable those sensors before you notice. If your gate isn’t reversing when it hits an obstruction, treat it as urgent. A live person answers (877) 610-2993 around the clock if you need us.
It does. Slide gates are lower to the ground, so they sit in the densest layer of salt-laden air and catch runoff from the concrete track. The rack and pinion gears wear faster, and the rollers rust quicker than swing gate hinges. We see more corrosion-related slide gate failures on canal-front properties than anywhere else. Call (877) 610-2993 and we’ll check the rollers and the rack and pinion before they fail outright.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marco Island and surrounding communities since 2001.
If your gate in Marco Island needs parts or a weld, call (877) 610-2993 for a free estimate. We answer live, day or night, and you’ll get a real number before any work starts.