Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Manor
Gate parts and welding work in Manor usually means one of two things: a hinge post that’s leaning in the Blackland Prairie clay, or a wide farm gate that’s twisting under its own weight. We fix both. Gatewood Fence & Gate has been repairing gates since 2001, and we weld on site in your driveway, not in some shop across town. If you’re off FM 973 or up in Shadowglen, we know the roads, we know the soil, and we know what those gates are up against out here. Call (877) 610-2993 and a live person answers, day or night.
The power and span problem is the thing most folks don’t see coming. A 16-foot pipe-and-tube gate weighs hundreds of pounds. Add a decade of clay heave working the hinge posts, and you’ve got a gate that drags, binds, and eventually snaps a weld at the mid-span. That’s where our Gate Parts & Welding crew starts: at the post, not the panel.
Why Gatewood Fence & Gate Is Manor’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When we weld a hinge or reset a post in Manor, we know we’ll see you again at the feed store or the HOA meeting. We don’t hide behind a voicemail queue. Call (877) 610-2993 at 3 a.m. or 3 p.m. and a person picks up. Not a call center. A person who knows the difference between a Viking opener and a Linear one and can tell you whether your gate needs a hinge or a full post replacement before we even roll out.
Every job we do in Manor carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. We also quote the price before any work starts and that’s the price you pay. No truck-surprise invoice at the end.
Manor’s a split market. You’ve got the 78653 zip covering everything from HOA-governed communities like Shadowglen to old ranch land off SH-130 where the driveway’s a quarter mile long and the gate’s been there since before the subdivision signs went up. We service both, which matters more than you’d think. A shop that only does ornamental iron in Austin subdivisions rarely knows what a solar opener on a 20-foot farm gate actually needs to survive a Central Texas summer.
Our Gate Parts & Welding Services in Manor
Hinge Replacement
In Manor, hinges fail because the soil moves. The Blackland Prairie clay under your gate posts swells after every rain and shrinks during the drought months. That constant movement works hinge welds loose and tears hinge bolts out of the post. We cut the old hinges off, weld in heavy-gauge replacements, and make sure the post is plumb before we hang the gate back. If the hinge post itself is heaving, we’ll tell you straight: replacing the hinge without fixing the post means you’ll fix it twice.
Post Replacement
Most gate sags start in the post, not the middle of the panel. We dig out the old footing in Manor’s clay, set the new post deeper than the frost line (which is shallow here, but the heave zone isn’t), and weld the gate back onto fresh hardware. For wide farm gates, we’ll often add a mid-span support or reinforce the post with a longer receiver so the gate doesn’t twist the post out of plumb within a year.
Rail Repair
Wide gates without reinforcement twist under their own weight, and the rail welds at the mid-span are the first thing to go. We see this on ranch entrances off FM 973 all the time. We cut out the cracked weld, fishplate or sleeve the rail, and weld it back square. If the gate’s been sagging long enough, we’ll add a diagonal brace so the repair actually holds instead of cracking again next season.
Custom Welding
Sometimes the part doesn’t exist because the gate was hand-built in 1987 by a rancher who’s since retired. We fabricate on site: new hinge barrels, custom latch mounts, operator brackets, receiver plates, bracing. If you’ve got a pipe gate that needs a solar opener mounted to it, we’ll weld the bracket and wire the panel so the whole thing works in the driveway, not on a trailer headed to a shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Manor
We’re certified to service nine major gate brands, and we stock common parts locally so a repair in Manor doesn’t have to wait on a freight truck. The ones we see most often out here are Linear and Ghost Controls on ranch driveways, and DoorKing on commercial and HOA entry systems. If you’ve got a Viking opener that’s still going strong, good. When it finally gives up, we can match it or upgrade it the same day we’re out. We don’t push a brand swap unless the old one’s beyond saving. Hal would rather fix what’s there than sell you something you didn’t ask for.
Common Gate Parts & Welding Problems We See in Manor Homes
- Clay-soil heave tilting hinge posts. Manor sits on some of the most aggressive shrink-swell clay in Texas. That’s why post realignment and hinge replacement here is a recurring repair, not a one-time fix. The same soil that cracks local foundations works on gate posts year-round.
- Wide farm gates twisting at the mid-span. A 14- or 16-foot agricultural gate without a diagonal brace is a torsion problem waiting to happen. The rail welds snap, the latch side droops, and eventually the gate drags in the dirt every time you open it.
- Solar gate openers losing power during overcast stretches. If the panel’s undersized for the operator’s duty cycle, a long cloudy week means the gate won’t open when you’re already late. We size panels for Manor’s actual sun and usage, not just the operator’s minimum spec.
- Rusted ornamental iron in HOA communities like Shadowglen. The humidity swings and rain we get in Manor eat through builder-grade powder coat fast. Matching the existing ornamental pattern matters if your HOA’s picky about the streetscape, and we weld in place so the finish work stays clean.
Pricing for Gate Parts & Welding in Manor, TX
Here’s what gate parts and welding work typically runs in Manor, and I’ll give you real numbers, not “it depends” with no answer. Hinge replacement on a standard residential gate runs $180 to $340 including the new hardware and the weld work. Post replacement with a new concrete footing costs $400 to $750 depending on depth and whether we’re doing one post or both. Mid-span rail repair with a brace runs $150 to $300. Custom welding jobs, like fabricating a solar opener bracket or building a new latch mount, start around $120 and go up based on the steel and time involved. A full pipe-and-tube farm gate replacement with new posts and hinges usually lands between $900 and $1,800 depending on span and gauge.
The price quoted is the price you pay. We agree on it before any work starts, in writing. Estimates are free, and if you’ve got a written quote from someone else, we’ll give you a free second opinion. Call (877) 610-2993 and we’ll get you a number.
We Also Serve Cities Near Manor
We run calls through Hornsby Bend, Pflugerville, Elgin, and Wells Branch the same week we schedule them in Manor. If you’re just outside the 78653 line, call (877) 610-2993 and ask; chances are you’re still in our county route, which means no trip charge. For full details on everything we weld and replace, visit our Gate Parts & Welding in Manor page.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Manor
Your gate post keeps leaning because Manor sits on Blackland Prairie clay that swells when wet and shrinks when dry, and that cycle pushes shallow footings out of plumb year after year. The fix that lasts in this soil is a deeper footing with proper drainage and sometimes a longer post receiver. Most gates we reset in Manor have shallow original footings that were never built for the heave cycle. Call (877) 610-2993 and we’ll tell you if your post just needs a realignment or a full reset with a deeper pour.
Yes. We weld a heavy-gauge mounting bracket directly onto the gate frame, set the operator post, and wire the solar panel sized for Manor’s sun and your gate’s cycle count. If your driveway’s a quarter mile from the house off FM 973, solar is almost always the better call than trenching power that far. We’ll quote the whole job before we start.
It often is. Storm debris and clay runoff can knock a slide gate’s track out of alignment, and when the rack and pinion gear grind, the mounting welds crack under the extra load. We realign the track, repair or replace the rack section, and weld the mounts back before you’ve stripped the pinion gear completely. Call (877) 610-2993 for a free estimate in Manor.
Yes. We cut out the rusted hinges and weld in replacements that match your existing ornamental iron pattern, then prime and paint to blend. Shadowglen’s HOA standards matter, so we keep the finish work clean and the weld lines tight. The quote’s free, and the price is set before we touch anything.
We start by correcting the posts, then weld a diagonal brace across the frame to stop the twist, and repair any cracked rail welds at the mid-span. You can’t fix a sagging farm gate by tightening the hinges; the frame itself has to be braced and the posts have to be plumb. Call (877) 610-2993 and we’ll come look at your gate and give you a written quote on the spot.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Manor
If your gate’s dragging, the hinges are tearing loose, or the weld’s cracked at the middle of a wide farm gate, call (877) 610-2993. Free estimates, honest numbers, and a person who answers the phone. We’ve been fixing gates since 2001, and we’ll tell you what needs fixing, what can wait, and what it costs before we ever strike an arc. The name’s on the shop. We’ll see you in Manor.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Manor since 2001.